Package: linux-image-3.2.0-4-amd64 Version: 3.2.46-1 When i make a upgrade procedure on my debian wheezy it stops by saying there is a problem in linux-image-3.2.0-4-amd64
root@neuromancer:/home/eric# aptitude update Treffer http://ftp.de.debian.org wheezy Release.gpg Treffer http://security.debian.org wheezy/updates Release.gpg Treffer http://ftp.de.debian.org wheezy-updates Release.gpg Treffer http://security.debian.org wheezy/updates Release Treffer http://ftp.de.debian.org wheezy Release Treffer http://security.debian.org wheezy/updates/main Sources Treffer http://ftp.de.debian.org wheezy-updates Release Treffer http://security.debian.org wheezy/updates/non-free Sources Treffer http://ftp.de.debian.org wheezy/main Sources Treffer http://security.debian.org wheezy/updates/contrib Sources Treffer http://ftp.de.debian.org wheezy/non-free Sources Treffer http://ftp.de.debian.org wheezy/contrib Sources Treffer http://security.debian.org wheezy/updates/main amd64 Packages Treffer http://ftp.de.debian.org wheezy/main amd64 Packages Treffer http://security.debian.org wheezy/updates/non-free amd64 Packages Treffer http://ftp.de.debian.org wheezy/non-free amd64 Packages Treffer http://security.debian.org wheezy/updates/contrib amd64 Packages Treffer http://ftp.de.debian.org wheezy/contrib amd64 Packages Treffer http://security.debian.org wheezy/updates/main i386 Packages Treffer http://ftp.de.debian.org wheezy/main i386 Packages Treffer http://security.debian.org wheezy/updates/non-free i386 Packages Treffer http://ftp.de.debian.org wheezy/non-free i386 Packages Treffer http://security.debian.org wheezy/updates/contrib i386 Packages Treffer http://ftp.de.debian.org wheezy/contrib i386 Packages Treffer http://security.debian.org wheezy/updates/contrib Translation-en Treffer http://ftp.de.debian.org wheezy/contrib Translation-en Treffer http://security.debian.org wheezy/updates/main Translation-en Treffer http://ftp.de.debian.org wheezy/main Translation-de_DE Treffer http://security.debian.org wheezy/updates/non-free Translation-en Treffer http://ftp.de.debian.org wheezy/main Translation-de Treffer http://ftp.de.debian.org wheezy/main Translation-en Treffer http://ftp.de.debian.org wheezy/non-free Translation-en Treffer http://ftp.de.debian.org wheezy-updates/main Sources Treffer http://ftp.de.debian.org wheezy-updates/non-free Sources Treffer http://ftp.de.debian.org wheezy-updates/contrib Sources Treffer http://ftp.de.debian.org wheezy-updates/main amd64 Packages Treffer http://ftp.de.debian.org wheezy-updates/non-free amd64 Packages Treffer http://ftp.de.debian.org wheezy-updates/contrib amd64 Packages Treffer http://ftp.de.debian.org wheezy-updates/main i386 Packages Treffer http://ftp.de.debian.org wheezy-updates/non-free i386 Packages Treffer http://ftp.de.debian.org wheezy-updates/contrib i386 Packages Treffer http://ftp.de.debian.org wheezy-updates/contrib Translation-en Treffer http://ftp.de.debian.org wheezy-updates/main Translation-en Treffer http://ftp.de.debian.org wheezy-updates/non-free Translation-en root@neuromancer:/home/eric# aptitude upgrade Die folgenden teilweise installierten Pakete werden konfiguriert: linux-image-3.2.0-4-amd64 Es werden keine Pakete installiert, aktualisiert oder entfernt. 0 Pakete aktualisiert, 0 zusätzlich installiert, 0 werden entfernt und 0 nicht aktualisiert. 0 B an Archiven müssen heruntergeladen werden. Nach dem Entpacken werden 0 B zusätzlich belegt sein. linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ... Running depmod. Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img. dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 17 zurück Fehler traten auf beim Bearbeiten von: linux-image-3.2.0-4-amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) Ein Paket konnte nicht installiert werden. Versuch, dies zu lösen: linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ... Running depmod. Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img. dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 17 zurück Fehler traten auf beim Bearbeiten von: linux-image-3.2.0-4-amd64 root@neuromancer:/home/eric# sudo dpkg --list linux-image-3.2.0-4-amd64 Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten | Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig |/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) ||/ Name Version Architektur Beschreibung +++-=====================================-=======================-=======================-================================================================================ iF linux-image-3.2.0-4-amd64 3.2.46-1 amd64 Linux 3.2 for 64-bit PCs root@neuromancer:/home/eric# dpkg --list linux-image-3.2.0-4-amd64 Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten | Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig |/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) ||/ Name Version Architektur Beschreibung +++-=====================================-=======================-=======================-================================================================================ iF linux-image-3.2.0-4-amd64 3.2.46-1 amd64 Linux 3.2 for 64-bit PCs root@neuromancer:/home/eric# dpkg --status linux-image-3.2.0-4-amd64 Package: linux-image-3.2.0-4-amd64 Status: install ok half-configured Priority: optional Section: kernel Installed-Size: 105529 Maintainer: Debian Kernel Team <debian-ker...@lists.debian.org> Architecture: amd64 Source: linux Version: 3.2.46-1 Config-Version: 3.2.41-2+deb7u2 Provides: linux-image, linux-modules-3.2.0-4-amd64 Depends: kmod | module-init-tools, linux-base (>= 3~), initramfs-tools (>= 0.99~) | linux-initramfs-tool Pre-Depends: debconf | debconf-2.0 Recommends: firmware-linux-free (>= 3~) Suggests: linux-doc-3.2, debian-kernel-handbook, grub-pc | extlinux | lilo Breaks: at (<< 3.1.12-1+squeeze1), initramfs-tools (<< 0.99~) Description: Linux 3.2 for 64-bit PCs The Linux kernel 3.2 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . This kernel also runs on a Xen hypervisor. It supports both privileged (dom0) and unprivileged (domU) operation. root@neuromancer:/home/eric# root@neuromancer:/home/eric# aptitude install reportbug Die folgenden teilweise installierten Pakete werden konfiguriert: linux-image-3.2.0-4-amd64 Es werden keine Pakete installiert, aktualisiert oder entfernt. 0 Pakete aktualisiert, 0 zusätzlich installiert, 0 werden entfernt und 0 nicht aktualisiert. 0 B an Archiven müssen heruntergeladen werden. Nach dem Entpacken werden 0 B zusätzlich belegt sein. linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ... Running depmod. Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img. dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 17 zurück Fehler traten auf beim Bearbeiten von: linux-image-3.2.0-4-amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) Ein Paket konnte nicht installiert werden. Versuch, dies zu lösen: linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ... Running depmod. Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img. dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 17 zurück Fehler traten auf beim Bearbeiten von: linux-image-3.2.0-4-amd64 eric@neuromancer:~$ reportbug -q --template -T none -s none -S normal -b --list-cc none -q linux-image-3.2.0-4-amd64 Include network configuration and status from this computer? Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit From: eric <e...@neuromancer.fritz.box> To: Debian Bug Tracking System <sub...@bugs.debian.org> Subject: linux-image-3.2.0-4-amd64: none X-Debbugs-Cc: none Package: src:linux Version: 3.2.46-1 Severity: normal Dear Maintainer, *** Please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these lines *** -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=38042732-8fb2-42a7-94cd-679c7ca79519 ro quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 3.798902] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c050 [ 3.798907] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.798911] usb 4-1.3: Product: USB-PS/2 Optical Mouse [ 3.798913] usb 4-1.3: Manufacturer: Logitech [ 3.815030] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.3/4-1.3:1.0/input/input2 [ 3.815136] generic-usb 0003:046D:C050.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-1.3/input0 [ 3.897765] usb 4-1.4: new full-speed USB device number 5 using uhci_hcd [ 4.030588] usb 4-1.4: New USB device found, idVendor=046d, idProduct=c227 [ 4.030593] usb 4-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.030596] usb 4-1.4: Product: G15 GamePanel LCD [ 4.053654] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.4/4-1.4:1.0/input/input3 [ 4.053765] generic-usb 0003:046D:C227.0004: input,hiddev0,hidraw3: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1a.1-1.4/input0 [ 5.911178] udevd[506]: starting version 175 [ 7.061620] EDAC MC: Ver: 2.1.0 [ 7.112626] wmi: Mapper loaded [ 7.208119] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 7.208124] ACPI: Power Button [PWRB] [ 7.208165] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 7.208168] ACPI: Power Button [PWRF] [ 7.211529] ACPI: Requesting acpi_cpufreq [ 7.213666] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0 [ 7.213682] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED) [ 7.213689] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 7.226874] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f] [ 7.226877] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.432909] iTCO_vendor_support: vendor-support=0 [ 7.466635] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 7.567447] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 7.567550] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) [ 7.567715] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.689384] psmouse: Unknown symbol input_mt_assign_slots (err 0) [ 7.689410] psmouse: Unknown symbol input_mt_sync_frame (err 0) [ 7.689485] psmouse: Unknown symbol input_mt_init_slots_flags (err 0) [ 7.745097] snd_pcm: Unknown symbol vm_iomap_memory (err 0) [ 7.745555] snd_pcm: Unknown symbol vm_iomap_memory (err 0) [ 7.964679] nvidia: module license 'NVIDIA' taints kernel. [ 7.964683] Disabling lock debugging due to kernel taint [ 8.110320] nvidia 0000:02:00.0: setting latency timer to 64 [ 8.110325] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 8.110416] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013 [ 9.162495] snd_pcm: Unknown symbol vm_iomap_memory (err 0) [ 9.181146] Linux media interface: v0.10 [ 9.196006] Linux video capture interface: v2.00 [ 9.210210] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0808) [ 9.225217] input: UVC Camera (046d:0808) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input7 [ 9.225320] usbcore: registered new interface driver uvcvideo [ 9.225326] USB Video Class driver (1.1.1) [ 12.791763] usb 1-4: reset high-speed USB device number 3 using ehci_hcd [ 13.892283] input: G15 Extra Keys as /devices/virtual/input/input8 [ 14.953193] Adding 23436284k swap on /dev/sdb6. Priority:-1 extents:1 across:23436284k [ 14.970642] EXT4-fs (sdb5): re-mounted. Opts: (null) [ 15.425129] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro [ 15.539408] loop: Unknown symbol bdgrab (err 0) [ 16.456035] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 16.524773] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended [ 16.528493] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.775049] RPC: Registered named UNIX socket transport module. [ 17.775052] RPC: Registered udp transport module. [ 17.775054] RPC: Registered tcp transport module. [ 17.775056] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.810174] FS-Cache: Loaded [ 17.850085] FS-Cache: Netfs 'nfs' registered for caching [ 17.861996] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 18.215195] r8169 0000:06:00.0: eth0: link down [ 18.215203] r8169 0000:06:00.0: eth0: link down [ 18.216968] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.347434] vboxdrv: Found 8 processor cores. [ 19.349324] vboxdrv: fAsync=0 offMin=0x2de offMax=0x31694 [ 19.349400] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 19.349403] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000). [ 19.721942] vboxpci: IOMMU not found (not registered) [ 20.564545] r8169 0000:06:00.0: eth0: link up [ 20.566185] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.526240] Bluetooth: Core ver 2.16 [ 23.526257] NET: Registered protocol family 31 [ 23.526259] Bluetooth: HCI device and connection manager initialized [ 23.526262] Bluetooth: HCI socket layer initialized [ 23.526264] Bluetooth: L2CAP socket layer initialized [ 23.526269] Bluetooth: SCO socket layer initialized [ 23.774848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.774858] Bluetooth: BNEP filters: protocol multicast [ 23.775640] Bluetooth: RFCOMM TTY layer initialized [ 23.775646] Bluetooth: RFCOMM socket layer initialized [ 23.775649] Bluetooth: RFCOMM ver 1.11 [ 23.865049] lp: driver loaded but no devices found [ 23.932243] ppdev: user-space parallel port driver [ 28.518296] usb 1-4: reset high-speed USB device number 3 using ehci_hcd [ 174.918656] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [ 209.015876] EXT4-fs (sda1): Unaligned AIO/DIO on inode 30 by VirtualBox; performance will be poor. [ 1585.598175] snd_pcm: Unknown symbol vm_iomap_memory (err 0) [ 2128.983147] device-mapper: uevent: version 1.0.3 [ 2128.983233] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-de...@redhat.com [ 2131.074315] efivars: Unknown symbol efi_query_variable_store (err 0) [ 2131.237484] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2131.237847] SGI XFS Quota Management subsystem [ 2131.240687] JFS: nTxBlock = 8192, nTxLock = 65536 [ 2131.251911] NTFS driver 2.1.30 [Flags: R/W MODULE]. [ 2131.261056] QNX4 filesystem 0.2.3 registered. [ 2131.279272] btrfs: Unknown symbol account_page_redirty (err 0) [ 2131.282595] fuse init (API version 7.17) ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1701 board_vendor: ASUSTeK Computer INC. board_name: Rampage II GENE board_version: Rev 2.xx ** Loaded modules: fuse libcrc32c zlib_deflate ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs ext3 jbd ext2 dm_mod snd_seq snd_seq_device snd_timer snd soundcore snd_page_alloc parport_pc ppdev rfcomm bnep lp parport bluetooth rfkill pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) binfmt_misc vboxdrv(O) nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc uvcvideo videodev v4l2_compat_ioctl32 media uinput nvidia(P) iTCO_wdt serio_raw pcspkr evdev iTCO_vendor_support asus_atk0110 coretemp mxm_wmi acpi_cpufreq mperf i2c_i801 i7core_edac processor button thermal_sys wmi i2c_core edac_core crc32c_intel ext4 crc16 jbd2 mbcache usbhid hid usb_storage sg sr_mod sd_mod cdrom crc_t10dif ata_generic ata_piix pata_jmicron uhci_hcd ahci libahci firewire_ohci libata scsi_mod firewire_core ehci_hcd r8169 crc_itu_t mii usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13) Subsystem: ASUSTeK Computer Inc. Device [1043:836b] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: f8000000-fbbfffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: i7core_edac 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at a800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at a880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at ac00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7fff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: ASUSTeK Computer Inc. Device [1043:82ea] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 7 Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: c0400000-c07fffff Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 [8086:3a44] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbe00000-fbefffff Prefetchable memory behind bridge: 00000000f6e00000-00000000f6efffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 [8086:3a46] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fbd00000-fbdfffff Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fbc00000-fbcfffff Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at a080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at a400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at a480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at 9000 [size=8] Region 1: I/O ports at 8c00 [size=4] Region 2: I/O ports at 8880 [size=8] Region 3: I/O ports at 8800 [size=4] Region 4: I/O ports at 8480 [size=16] Region 5: I/O ports at 8400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7ffd000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at a000 [size=8] Region 1: I/O ports at 9c00 [size=4] Region 2: I/O ports at 9880 [size=8] Region 3: I/O ports at 9800 [size=4] Region 4: I/O ports at 9480 [size=16] Region 5: I/O ports at 9400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT200b [GeForce GTX 275] [10de:05e6] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Device [3842:1175] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 24 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at bc00 [size=128] [virtual] Expansion ROM at fbb80000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia 04:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:824f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 16 Region 5: Memory at fbcfe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 04:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:824f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at cc00 [size=8] Region 1: I/O ports at c880 [size=4] Region 2: I/O ports at c800 [size=8] Region 3: I/O ports at c480 [size=4] Region 4: I/O ports at c400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 05:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8384] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fbdff000 (64-bit, non-prefetchable) [size=2K] Region 2: I/O ports at d800 [size=256] Capabilities: <access denied> Kernel driver in use: firewire_ohci 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82c6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 68 Region 0: I/O ports at e800 [size=256] Region 2: Memory at fbeff000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at f6ef0000 (64-bit, prefetchable) [size=64K] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ff:00.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers [8086:2c41] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder [8086:2c01] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 0 [8086:2c10] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 [8086:2c11] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller [8086:2c18] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder [8086:2c19] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers [8086:2c1c] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers [8086:2c20] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers [8086:2c21] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers [8086:2c22] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers [8086:2c28] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers [8086:2c29] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers [8086:2c2a] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers [8086:2c30] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers [8086:2c31] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers [8086:2c32] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 046d:0808 Logitech, Inc. Webcam C600 Bus 001 Device 004: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer Bus 004 Device 002: ID 046d:c223 Logitech, Inc. G11/G15 Keyboard / USB Hub Bus 004 Device 003: ID 046d:c226 Logitech, Inc. G15 Refresh Keyboard Bus 004 Device 004: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse Bus 004 Device 005: ID 046d:c227 Logitech, Inc. G15 Refresh Keyboard -- System Information: Debian Release: 7.1 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores) Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org