On 30 June 2013 15:58, Ian Campbell <i...@hellion.org.uk> wrote: > In 0.4.2-7+wheezy2 the fan_error function would have been empty, so do > you know for sure it wasn't being triggered previously too?
I reinstalled 0.4.2-7+wheezy2 and added beep to the fan error function. Got plenty of beeps so it would appear that it was always triggered originally. There did not appear to be any ill effects resulting from the original version so I suppose having it blank for a TS109 it later ones will probably have qcontrol run OK. A few of the other things could probably be cleared out again for a TS-109 too. > > As there does not seem to be a way to easily distinguish the TS109 and TS209 > > using /proc/cpuinfo there are a few choices: > > > > a) ask the user at install time which they have and create the appropriate > > symlink /etc/qcontrol.conf -> qcontrol/ts109.lua > > I'd rather not do this (ask the user) unless there is absolutely no > alternative. That's fine. > > > b) Check for the presence of fan/2nd disk to determine if the QNAP is a > > TS209 > > It's possible that there is a GPIO e.g. you can distinguish TS-119 from > TS-219 via GPIO 44. Unless you've got a 209 to compare your 109 against > though I'm not sure how to find out. > > Perhaps Martin (CCd) has a 209 and/or can ask QNAP? > The only other QNAP I have is a TS-119 so can't really help too much. Thanks, Dermot -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
