Package: src:linux Version: 3.11.8-1 Severity: important Dear Maintainer,
Although many of the X86-specific hardware options are enabled as modules, that for ChromeOS devices is not. This is a bit of a show-stopper for those of us who are using them with Debian. Please consider setting CHROMEOS_LAPTOP to "M" so that we can effectively use our machines (you may note that I'm running this on a virtualbox instance due to this very problem). Thanks, -- Package-specific info: ** Version: Linux version 3.11-2-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 SMP Debian 3.11.8-1 (2013-11-13) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.11-2-amd64 root=UUID=9e8a603f-d3f0-4c19-83cc-f3944dbec3a6 ro quiet ** Not tainted ** Kernel log: [ 1.817010] ohci-pci: OHCI PCI platform driver [ 1.837554] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.837559] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.843720] Error: Driver 'pcspkr' is already registered, aborting... [ 1.915827] microcode: CPU0 sig=0x20652, pf=0x1, revision=0x0 [ 1.951227] platform microcode: firmware: agent aborted loading intel-ucode/06-25-02 (not found?) [ 1.951668] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 1.964458] intel8x0_measure_ac97_clock: measured 52776 usecs (10397 samples) [ 1.964463] intel8x0: measured clock 197002 rejected [ 2.056522] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 2.132364] Switched to clocksource tsc [ 2.324348] intel8x0_measure_ac97_clock: measured 55952 usecs (10473 samples) [ 2.324354] intel8x0: measured clock 187178 rejected [ 2.684311] intel8x0_measure_ac97_clock: measured 55910 usecs (10182 samples) [ 2.684316] intel8x0: measured clock 182114 rejected [ 2.684318] intel8x0: clocking to 48000 [ 2.685328] ata_piix 0000:00:01.1: version 2.13 [ 2.685596] ata_piix 0000:00:01.1: setting latency timer to 64 [ 2.688132] scsi1 : ata_piix [ 2.688132] scsi2 : ata_piix [ 2.688132] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 [ 2.688132] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 [ 2.689106] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr [ 2.691254] ehci-pci 0000:00:0b.0: setting latency timer to 64 [ 2.691316] ehci-pci 0000:00:0b.0: EHCI Host Controller [ 2.691329] ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 2.691901] ehci-pci 0000:00:0b.0: irq 19, io mem 0xf0805000 [ 2.700122] ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00 [ 2.700151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.700153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.700154] usb usb1: Product: EHCI Host Controller [ 2.700155] usb usb1: Manufacturer: Linux 3.11-2-amd64 ehci_hcd [ 2.700156] usb usb1: SerialNumber: 0000:00:0b.0 [ 2.700242] hub 1-0:1.0: USB hub found [ 2.700252] hub 1-0:1.0: 8 ports detected [ 2.701706] ohci-pci 0000:00:06.0: setting latency timer to 64 [ 2.701733] ohci-pci 0000:00:06.0: OHCI PCI host controller [ 2.701745] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2 [ 2.701865] ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000 [ 2.756483] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.756489] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.756493] usb usb2: Product: OHCI PCI host controller [ 2.756495] usb usb2: Manufacturer: Linux 3.11-2-amd64 ohci_hcd [ 2.756498] usb usb2: SerialNumber: 0000:00:06.0 [ 2.756835] hub 2-0:1.0: USB hub found [ 2.756861] hub 2-0:1.0: 8 ports detected [ 2.758233] e1000 0000:00:03.0: setting latency timer to 64 [ 3.063502] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133 [ 3.063856] ata3.00: configured for UDMA/33 [ 3.064354] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5 [ 3.100041] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:58:3b:4e [ 3.100041] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.148479] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray [ 3.148482] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.148736] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.190424] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.191034] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 3.368160] usb 2-1: new full-speed USB device number 2 using ohci-pci [ 3.641208] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021 [ 3.641213] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 3.641214] usb 2-1: Product: USB Tablet [ 3.641216] usb 2-1: Manufacturer: VirtualBox [ 3.665289] hidraw: raw HID events driver (C) Jiri Kosina [ 3.680055] usbcore: registered new interface driver usbhid [ 3.680061] usbhid: USB HID core driver [ 3.708103] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input5 [ 3.708410] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0 [ 3.753671] Adding 392188k swap on /dev/sda5. Priority:-1 extents:1 across:392188k [ 3.782089] EXT4-fs (sda1): re-mounted. Opts: (null) [ 3.926944] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.711731] RPC: Registered named UNIX socket transport module. [ 4.711734] RPC: Registered udp transport module. [ 4.711735] RPC: Registered tcp transport module. [ 4.711736] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.744588] FS-Cache: Loaded [ 4.768496] FS-Cache: Netfs 'nfs' registered for caching [ 4.803811] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 5.361707] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.362402] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 5.362674] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 71.156857] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 231.952707] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 332.766006] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 520.603504] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 560.273398] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 701.168783] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1059.322735] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1072.577174] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1080.037671] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1084.749383] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1087.916858] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1143.374044] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1178.264266] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1299.371799] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1487.420988] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1555.600013] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1576.238055] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1579.847095] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1585.219979] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. [ 1898.551690] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. ** Model information sys_vendor: innotek GmbH product_name: VirtualBox product_version: 1.2 chassis_vendor: Oracle Corporation chassis_version: bios_vendor: innotek GmbH bios_version: VirtualBox board_vendor: Oracle Corporation board_name: VirtualBox board_version: 1.2 ** Loaded modules: nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc joydev hid_generic usbhid hid sg sr_mod cdrom ata_generic microcode psmouse e1000 ohci_pci ohci_hcd ehci_pci i2c_piix4 evdev pcspkr serio_raw i2c_core ehci_hcd usbcore parport_pc mperf parport processor button ac ata_piix usb_common thermal_sys snd_intel8x0 snd_ac97_codec snd_pcm snd_page_alloc snd_timer snd soundcore ac97_bus ext4 crc16 mbcache jbd2 sd_mod crc_t10dif ahci libahci libata scsi_mod ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 08:00:27:58:3b:4e brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 brd 10.0.2.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::a00:27ff:fe58:3b4e/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth0: 919671766 1057949 0 0 0 0 0 0 25644164 426083 0 0 0 0 0 0 lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 471617 total packets received 0 forwarded 0 incoming packets discarded 471615 incoming packets delivered 426051 requests sent out Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 14 active connections openings 0 passive connection openings 0 failed connection attempts 0 connection resets received 0 connections established 471577 segments received 426023 segments send out 0 segments retransmited 0 bad segments received. 0 resets sent Udp: 38 packets received 0 packets to unknown port received. 0 packet receive errors 38 packets sent UdpLite: TcpExt: 8 TCP sockets finished time wait in fast timer 159 delayed acks sent 25 delayed acks further delayed because of locked socket Quick ack mode was activated 88 times 456708 packet headers predicted 15 acknowledgments not containing data payload received 215 predicted acknowledgments TCPRcvCoalesce: 332253 TCPOFOQueue: 2 IpExt: InNoRoutes: 2 InOctets: 881407128 OutOctets: 17109345 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) Region 4: I/O ports at d000 [size=16] Kernel driver in use: ata_piix 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] 00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02) Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min) Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at d010 [size=8] Capabilities: <access denied> Kernel driver in use: e1000 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at d020 [size=32] Region 1: Memory at f0400000 (32-bit, non-prefetchable) [size=4M] Region 2: Memory at f0800000 (32-bit, prefetchable) [size=16K] 00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01) Subsystem: Intel Corporation Device [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at d100 [size=256] Region 1: I/O ports at d200 [size=64] Kernel driver in use: snd_intel8x0 00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 22 Region 0: Memory at f0804000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 00:0b.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (prog-if 20 [EHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0805000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ehci-pci 00:0d.0 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at d240 [size=8] Region 1: I/O ports at 0000 Region 2: I/O ports at d250 [size=8] Region 3: I/O ports at 0000 Region 4: I/O ports at d260 [size=16] Region 5: Memory at f0806000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.11-2-amd64 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.11-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.52 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 9-3 ii linux-base 3.5 Versions of packages linux-image-3.11-2-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.11-2-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u2 pn linux-doc-3.11 <none> Versions of packages linux-image-3.11-2-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.11-2-amd64/prerm/removing-running-kernel-3.11-2-amd64: true linux-image-3.11-2-amd64/postinst/depmod-error-initrd-3.11-2-amd64: false -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org