Hi, On Sun, May 04, 2014 at 07:58:34PM +0300, Tuomas Suutari wrote: > I installed fancontrol package and it installed /etc/init.d/fancontrol > init script. I created configuration file with pwmconfig and then fan > speeds are controlled by fancontrol from the system boot. I was happy > with this, but then I needed the lm-sensors package too and installed > it. Installing lm-sensors removed /etc/init.d/fancontrol init script > and so fancontrol is not automatically started at boot anymore. > > What's the correct way to get fan speeds controlled by fancontrol from > system boot?
That is indeed the correct way, but the lm-sensors package is buggy and your case is not correctly taken into account in your case. I will fix that in the next upload. > If I just rename /etc/init.d/fancontrol.dpkg-bak to > /etc/init.d/fancontrol, then next upgrade to lm-sensors will just > remove it again. Doesn't it? No, this happen only happens if you upgrade lm-sensors from a version lower than 1:3.1.1-5, so your configuration file should now be safe. Aurelien -- Aurelien Jarno GPG: 4096R/1DDD8C9B [email protected] http://www.aurel32.net -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
