Package: src:linux Version: 3.15~rc7-1~exp1 Severity: normal Dear Maintainer,
some seconds or minutes after waking up from suspend to disk after the NMI watchdog has been disabled (e.g. with powertop or with "echo 0 > /proc/sys/kernel/nmi_watchdog") before suspend, I get the following message from the kernel: > Uhhuh. NMI received for unknown reason 2c on CPU 0. > Do you have a strange power saving mode enabled? > Dazed and confused, but trying to continue The exact timing seems to differ from run to run. The problem seems to be identical to the problem reported here: http://linux-kernel.2935.n7.nabble.com/Uhhuh-NMI-received-for-unknown-reason-2c-on-CPU-0-tp591524p628729.html Please note that the linked thread is interleaved with an independent e1000 networking problem. The NMI problem seems to be unrelated from e1000 there and it definitely is unrelated here, as no e1000 is loaded or plugged-in. I only tested 3.15, RC7, but I guess, that the problem occurs with older kernels, too, and that I didn't see it before, as I just recently switched the aforementioned watchdog option. I can test different kernels if this helps, but as the kernels works without any obvious problems, I haven't done this, yet. The end of a restore from disk run looks like the following: [29240.016685] PM: restore of devices complete after 2379.959 msecs [29240.017030] PM: Image restored successfully. [29240.017063] PM: Basic memory bitmaps freed [29240.017064] Restarting tasks ... done. [29423.719271] Uhhuh. NMI received for unknown reason 2c on CPU 0. [29423.719281] Do you have a strange power saving mode enabled? [29423.719286] Dazed and confused, but trying to continue Another, more detailed run, looks as follows: [ 69.624048] PM: Hibernation mode set to 'platform' [ 69.969074] (NULL device *): firmware: direct-loading firmware amd-ucode/microcode_amd.bin [ 69.969114] PM: Syncing filesystems ... done. [ 70.385415] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 70.387587] PM: Marking nosave pages: [mem 0x00098000-0x000fffff] [ 70.387600] PM: Marking nosave pages: [mem 0xdff90000-0xffffffff] [ 70.388839] PM: Marking nosave pages: [mem 0xd4000000-0xd7ffffff] [ 70.389642] PM: Basic memory bitmaps created [ 70.389699] PM: Preallocating image memory... done (allocated 218996 pages) [ 71.123610] PM: Allocated 875984 kbytes in 0.73 seconds (1199.97 MB/s) [ 71.123612] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 71.125251] Suspending console(s) (use no_console_suspend to debug) [ 71.175132] PM: freeze of devices complete after 49.868 msecs [ 71.176441] PM: late freeze of devices complete after 1.304 msecs [ 71.177795] PM: noirq freeze of devices complete after 1.350 msecs [ 71.179148] ACPI: Preparing to enter system sleep state S4 [ 71.180007] PM: Saving platform NVS memory [ 71.180527] Disabling non-boot CPUs ... [ 71.182262] kvm: disabling virtualization on CPU1 [ 71.282478] smpboot: CPU 1 is now offline [ 71.284767] kvm: disabling virtualization on CPU2 [ 71.284775] smpboot: CPU 2 is now offline [ 71.286771] kvm: disabling virtualization on CPU3 [ 71.286823] smpboot: CPU 3 is now offline [ 71.288525] kvm: disabling virtualization on CPU4 [ 71.390451] smpboot: CPU 4 is now offline [ 71.392044] kvm: disabling virtualization on CPU5 [ 71.494456] smpboot: CPU 5 is now offline [ 71.494801] PM: Creating hibernation image: [ 71.667480] PM: Need to copy 220062 pages [ 71.667481] PM: Normal pages needed: 220062 + 1024, available pages: 2908835 [ 71.495930] PM: Restoring platform NVS memory [ 71.496021] PCI-DMA: Resuming GART IOMMU [ 71.496021] PCI-DMA: Restoring GART aperture settings [ 71.496195] LVT offset 1 assigned for vector 0x400 [ 71.496203] IBS: LVT offset 1 assigned [ 71.496274] Enabling non-boot CPUs ... [ 71.496382] x86: Booting SMP configuration: [ 71.496383] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 71.507336] kvm: enabling virtualization on CPU1 [ 71.509428] process: Switch to broadcast mode on CPU1 [ 71.509647] CPU1 is up [ 71.509701] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 71.520653] kvm: enabling virtualization on CPU2 [ 71.522741] process: Switch to broadcast mode on CPU2 [ 71.522914] CPU2 is up [ 71.522976] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 71.533929] kvm: enabling virtualization on CPU3 [ 71.536031] process: Switch to broadcast mode on CPU3 [ 71.536208] CPU3 is up [ 71.536270] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 71.547221] kvm: enabling virtualization on CPU4 [ 71.549333] process: Switch to broadcast mode on CPU4 [ 71.549510] CPU4 is up [ 71.549574] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 71.560527] kvm: enabling virtualization on CPU5 [ 71.562615] process: Switch to broadcast mode on CPU5 [ 71.562789] CPU5 is up [ 71.569418] ACPI: Waking up from system sleep state S4 [ 71.584196] PM: noirq restore of devices complete after 14.608 msecs [ 71.584799] PM: early restore of devices complete after 0.560 msecs [ 71.640133] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 71.640210] radeon 0000:01:05.0: WB enabled [ 71.640213] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800dfb39c00 [ 71.641849] sd 0:0:0:0: [sda] Starting disk [ 71.641892] sd 2:0:0:0: [sdb] Starting disk [ 71.672129] [drm] ring test on 0 succeeded in 1 usecs [ 71.672147] [drm] ib test on ring 0 succeeded in 0 usecs [ 71.672380] r8169 0000:02:00.0 eth0: link down [ 71.696047] usb usb5: root hub lost power or was reset [ 71.696086] usb usb6: root hub lost power or was reset [ 71.696100] usb usb7: root hub lost power or was reset [ 71.696106] usb usb2: root hub lost power or was reset [ 71.696123] usb usb3: root hub lost power or was reset [ 71.696164] usb usb4: root hub lost power or was reset [ 71.696209] usb usb1: root hub lost power or was reset [ 71.960063] ata2: SATA link down (SStatus 0 SControl 300) [ 71.960126] ata4: SATA link down (SStatus 0 SControl 300) [ 71.960207] ata6: SATA link down (SStatus 0 SControl 300) [ 72.024128] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 72.132084] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 72.132120] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 72.132153] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 72.132600] ata1.00: configured for UDMA/100 [ 72.133058] ata5.00: configured for UDMA/100 [ 72.143199] ata3.00: configured for UDMA/133 [ 72.628236] usb 2-1.1: reset low-speed USB device number 3 using ehci-pci [ 73.168194] usb 2-1.2: reset low-speed USB device number 4 using ehci-pci [ 73.240881] r8169 0000:02:00.0 eth0: link up [ 73.536291] usb 2-1.3: reset full-speed USB device number 5 using ehci-pci [ 74.086254] PM: restore of devices complete after 2448.838 msecs [ 74.086593] PM: Image restored successfully. [ 74.086621] PM: Basic memory bitmaps freed [ 74.086623] Restarting tasks ... done. [ 109.050655] Uhhuh. NMI received for unknown reason 2c on CPU 0. [ 109.050659] Do you have a strange power saving mode enabled? [ 109.050660] Dazed and confused, but trying to continue Kind regards Patrick -- Package-specific info: ** Version: Linux version 3.15-rc7-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.15~rc7-1~exp1 (2014-05-27) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.15-rc7-amd64 root=UUID=1972ccfb-49c1-44a2-bd3c-6300a6e7222d ro quiet RESUME=/dev/sda4 init=/bin/systemd ** Not tainted ** Kernel log: [ 2.494848] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.494855] usb usb5: Product: OHCI PCI host controller [ 2.494861] usb usb5: Manufacturer: Linux 3.15-rc7-amd64 ohci_hcd [ 2.494866] usb usb5: SerialNumber: 0000:00:13.0 [ 2.495266] hub 5-0:1.0: USB hub found [ 2.495286] hub 5-0:1.0: 5 ports detected [ 2.495959] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.495976] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 2.496035] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe6fc000 [ 2.554737] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.554742] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.554745] usb usb6: Product: OHCI PCI host controller [ 2.554748] usb usb6: Manufacturer: Linux 3.15-rc7-amd64 ohci_hcd [ 2.554750] usb usb6: SerialNumber: 0000:00:14.5 [ 2.554987] hub 6-0:1.0: USB hub found [ 2.554997] hub 6-0:1.0: 2 ports detected [ 2.555306] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.555315] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 2.555344] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe6f3000 [ 2.614787] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.614792] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.614795] usb usb7: Product: OHCI PCI host controller [ 2.614797] usb usb7: Manufacturer: Linux 3.15-rc7-amd64 ohci_hcd [ 2.614798] usb usb7: SerialNumber: 0000:00:16.0 [ 2.615022] hub 7-0:1.0: USB hub found [ 2.615028] hub 7-0:1.0: 4 ports detected [ 2.624521] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input6 [ 2.631986] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 2.631998] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.632006] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 2.632011] sound hdaudioC0D2: mono: mono_out=0x0 [ 2.632016] sound hdaudioC0D2: dig-out=0x11/0x1e [ 2.632021] sound hdaudioC0D2: inputs: [ 2.632027] sound hdaudioC0D2: Front Mic=0x19 [ 2.632032] sound hdaudioC0D2: Rear Mic=0x18 [ 2.632038] sound hdaudioC0D2: Line=0x1a [ 2.648926] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 2.649001] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 2.649563] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 2.649663] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 2.649825] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 2.650002] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 2.650987] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 2.651067] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 2.674762] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.686885] Switched to clocksource tsc [ 2.807062] usb 2-1: New USB device found, idVendor=0409, idProduct=005a [ 2.807074] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.807628] hub 2-1:1.0: USB hub found [ 2.807829] hub 2-1:1.0: 3 ports detected [ 2.865666] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 3.094956] usb 2-1.1: new low-speed USB device number 3 using ehci-pci [ 3.224727] usb 2-1.1: New USB device found, idVendor=045e, idProduct=00db [ 3.224739] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.224746] usb 2-1.1: Product: Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000 [ 3.224751] usb 2-1.1: Manufacturer: Microsoft [ 3.245772] hidraw: raw HID events driver (C) Jiri Kosina [ 3.265367] usbcore: registered new interface driver usbhid [ 3.265369] usbhid: USB HID core driver [ 3.270769] input: Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:00DB.0001/input/input15 [ 3.270986] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:13.2-1.1/input0 [ 3.272620] input: Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:00DB.0002/input/input16 [ 3.272800] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:13.2-1.1/input1 [ 3.315056] usb 2-1.2: new low-speed USB device number 4 using ehci-pci [ 3.428820] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c051 [ 3.428831] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.428837] usb 2-1.2: Product: USB-PS/2 Optical Mouse [ 3.428843] usb 2-1.2: Manufacturer: Logitech [ 3.451391] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C051.0003/input/input17 [ 3.451730] hid-generic 0003:046D:C051.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.2-1.2/input0 [ 3.518893] usb 2-1.3: new full-speed USB device number 5 using ehci-pci [ 3.674705] usb 2-1.3: New USB device found, idVendor=056d, idProduct=0002 [ 3.674715] usb 2-1.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 3.674721] usb 2-1.3: Product: EIZO USB HID Monitor [ 3.674726] usb 2-1.3: Manufacturer: EIZO [ 4.688015] hid-generic 0003:056D:0002.0004: hiddev0,hidraw3: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:13.2-1.3/input0 [ 5.172341] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 6.487543] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 6.533841] systemd-journald[301]: Received request to flush runtime journal from PID 1 [ 6.795513] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168d-1.fw (-2) [ 6.795587] r8169 0000:02:00.0: Direct firmware load failed with error -2 [ 6.795591] r8169 0000:02:00.0: Falling back to user helper [ 6.796574] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-12) [ 6.812271] r8169 0000:02:00.0 eth0: link down [ 6.812289] r8169 0000:02:00.0 eth0: link down [ 6.812427] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.057402] RPC: Registered named UNIX socket transport module. [ 7.057411] RPC: Registered udp transport module. [ 7.057416] RPC: Registered tcp transport module. [ 7.057420] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.061043] FS-Cache: Loaded [ 7.067918] FS-Cache: Netfs 'nfs' registered for caching [ 7.075995] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 7.177690] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 7.177837] NFSD: starting 90-second grace period (net ffffffff8188c240) [ 8.303075] r8169 0000:02:00.0 eth0: link up [ 8.303086] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.181549] r8169 0000:02:00.0 eth0: link down [ 14.059727] r8169 0000:02:00.0 eth0: link up [ 330.482647] r8169 0000:02:00.0 eth0: link down ** Model information sys_vendor: MSI product_name: MS-7642 product_version: 1.0 chassis_vendor: MSI chassis_version: 1.0 bios_vendor: American Megatrends Inc. bios_version: V1.13 board_vendor: MSI board_name: 890GXM-G65 (MS-7642) board_version: 1.0 ** Loaded modules: binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc hid_generic joydev hid_microsoft usbhid hid snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi evdev kvm_amd kvm sg snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_seq_midi snd_pcm_oss parport_pc tpm_infineon snd_mixer_oss snd_seq_midi_event parport snd_pcm snd_rawmidi tpm_tis psmouse tpm pcspkr serio_raw sr_mod ohci_pci cdrom ohci_hcd ehci_pci ne2k_pci snd_seq ehci_hcd 8390 snd_seq_device edac_mce_amd snd_timer edac_core usbcore usb_common sp5100_tco i2c_piix4 snd soundcore button r8169 mii acpi_cpufreq processor thermal_sys shpchp ip6table_filter ip6_tables xt_LOG xt_limit xt_multiport xt_conntrack iptable_filter xt_TCPMSS xt_tcpmss xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat f71882fg k10temp nf_conntrack_ipv4 nf_defrag_ipv4 fuse nf_nat_ipv4 nf_nat nf_conntrack loop ip_tables x_tables dm_crypt dm_mod autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common radeon ahci libahci i2c_algo_bit drm_kms_helper ttm libata drm scsi_mod i2c_core ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601] Subsystem: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe700000-fe8fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at a000 [size=4] Region 2: I/O ports at 9000 [size=8] Region 3: I/O ports at 8000 [size=4] Region 4: I/O ports at 7000 [size=16] Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 41) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: piix4_smbus 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 0000e000-0000efff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6f3000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS880 [Radeon HD 4290] [1002:9714] (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 01:05.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe8e8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03) Subsystem: Micro-Star International Co., Ltd. Device [1462:7642] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at d800 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K] Expansion ROM at fe9e0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 04:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029] Subsystem: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at e800 [size=32] Kernel driver in use: ne2k-pci ** USB devices: Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 056d:0002 EIZO Corp. HID Monitor Controls Bus 002 Device 004: ID 046d:c051 Logitech, Inc. G3 (MX518) Optical Mouse Bus 002 Device 003: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0 Bus 002 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (900, 'testing'), (800, 'stable'), (500, 'testing-proposed-updates'), (400, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.15-rc7-amd64 (SMP w/6 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.15-rc7-amd64 depends on: ii debconf [debconf-2.0] 1.5.53 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 16-2 ii linux-base 3.5 ii module-init-tools 16-2 Versions of packages linux-image-3.15-rc7-amd64 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.15-rc7-amd64 suggests: pn debian-kernel-handbook <none> ii extlinux 3:4.05+dfsg-6+deb8u1 ii grub-pc 2.00-22 pn linux-doc-3.15 <none> Versions of packages linux-image-3.15-rc7-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.41 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.15-rc7-amd64/postinst/depmod-error-initrd-3.15-rc7-amd64: false linux-image-3.15-rc7-amd64/prerm/removing-running-kernel-3.15-rc7-amd64: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org