On Sat, Jul 12, 2014 at 7:05 PM, Bastien ROUCARIES <roucaries.bast...@gmail.com> wrote: > On Wed, Jul 9, 2014 at 9:58 AM, Ian Campbell <i...@hellion.org.uk> wrote: >> On Tue, 2014-07-08 at 23:28 +0200, Bastien ROUCARIES wrote: >>> On Tue, Jul 8, 2014 at 9:39 PM, Ian Campbell <i...@hellion.org.uk> wrote: >>> > On Mon, 2014-07-07 at 17:05 +0200, Martin Michlmayr wrote: >>> >> * Bastien ROUCARIES <roucaries.bast...@gmail.com> [2014-07-06 22:10]: >>> >> > >> You combine the kernel and the DTB in >>> >> > >> $(TEMP)/dns-320/vmlinuz-dns320. But then >>> >> > >> instead of using this file to generate the kernel.uboot, you use >>> >> > >> the original >>> >> > >> kernel. >>> >> > >>> >> > Corrected thank >>> >> >>> >> Looks good. >>> > >>> > I went to apply this but: >>> > >>> > mkdir -p ./tmp/kirkwood_network-console/dns-320 >>> > cat ./tmp/kirkwood_network-console/vmlinuz-3.14-1-kirkwood >>> > ./tmp/kirkwood_network-console/lib/kirkwood-dns320.dtb > >>> > ./tmp/kirkwood_network-console/dns-320/vmlinuz-dns320 >>> > mkimage -A arm -O linux -T kernel -C none -e 0x00008000 -a 0x00008000 -n >>> > "Debian kernel" -d ./tmp/kirkwood_network-console/dns-320/kernel >>> > ./tmp/kirkwood_network-console/dns-320/vmlinuz-dns320 >>> > /usr/bin/mkimage: Can't open >>> > ./tmp/kirkwood_network-console/dns-320/kernel: No such file or directory >>> > config/armel/kirkwood/network-console.cfg:9: recipe for target 'dns-320' >>> > failed >>> >>> My fault here updated version >> >> Thanks, pushed. It should show up in the dailies tomorrow. > > > Hi UImage is too big to get into mtd :S You said that it it is a > trimmed down version ? Any idea to trim more ? > > BTW it seems that this config need a serial console in order to set > ssh password. Do you have pointer about documentation of how to set it > without serial. I plan to document dns-320 on the wiki.
Could you also push the following patch ? The first help me to debug and is the only stuff needed in order to use uboot booting from serial console The second one, will document the limit. BTW it need to include sata_mv module in order to see disk. How can I do ? Bastien > Bastien > > >> Ian. >>
From b1214924d0914165af5dfde92b8a149495dc0378 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bastien=20ROUCARI=C3=88S?= <roucaries.bast...@gmail.com> Date: Sat, 12 Jul 2014 19:22:55 +0200 Subject: [PATCH 1/2] Add kernel and initrd to debian installer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It help to restore from serial console, when flashing from dlink fail. Signed-off-by: Bastien ROUCARIÈS <roucaries.bast...@gmail.com> --- build/config/armel/kirkwood/network-console.cfg | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/build/config/armel/kirkwood/network-console.cfg b/build/config/armel/kirkwood/network-console.cfg index 1489ec4..6bf1ef5 100644 --- a/build/config/armel/kirkwood/network-console.cfg +++ b/build/config/armel/kirkwood/network-console.cfg @@ -10,9 +10,13 @@ dns-320: mkdir -p $(TEMP)/dns-320 cat $(TEMP_KERNEL) $(TEMP_DTBS)/kirkwood-dns320.dtb > $(TEMP)/dns-320/vmlinuz-dns320 mkimage -A arm -O linux -T kernel -C none -e 0x00008000 -a 0x00008000 -n "Debian kernel" -d $(TEMP)/dns-320/vmlinuz-dns320 $(TEMP)/dns-320/kernel.uboot + cp $(TEMP)/dns-320/vmlinuz-dns320 $(TEMP)/dns-320/kernel.uboot $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/uImage mkimage -A arm -O linux -T ramdisk -C gzip -e 0x00e00000 -a 0x00e00000 -n "debian-installer ramdisk" -d $(TEMP_INITRD) $(TEMP)/dns-320/initrd.uboot - mkdns323fw -k $(TEMP)/dns-320/kernel.uboot -i $(TEMP)/dns-320/initrd.uboot -t DNS-320 -o $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/netboot.img - update-manifest $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/netboot.img "installer image (dlink firmware) for D-Link DNS-320" + cp $(TEMP)/dns-320/vmlinuz-dns320 $(TEMP)/dns-320/initrd.uboot $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/uInitrd + mkdns323fw -k $(TEMP)/dns-320/kernel.uboot -i $(TEMP)/dns-320/initrd.uboot -t DNS-320 -o $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/flash-debian + update-manifest $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/flash-debian "installer image (dlink firmware) for D-Link DNS-320" + update-manifest $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/uImage "kernel for D-Link DNS-320" + update-manifest $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/uInitrd "initrd for D-Link DNS-320" # QNAP TS-119, TS-219 and TS-219P -- 2.0.0
From d2a941f53ff7722b450c5e0a578b08b575462228 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bastien=20ROUCARI=C3=88S?= <roucaries.bast...@gmail.com> Date: Sat, 12 Jul 2014 19:35:19 +0200 Subject: [PATCH 2/2] Fail if dns-320 is too big MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dns 320 image are less than 5M due to flash constraint Signed-off-by: Bastien ROUCARIÈS <roucaries.bast...@gmail.com> --- build/config/armel/kirkwood/network-console.cfg | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/build/config/armel/kirkwood/network-console.cfg b/build/config/armel/kirkwood/network-console.cfg index 6bf1ef5..2d34652 100644 --- a/build/config/armel/kirkwood/network-console.cfg +++ b/build/config/armel/kirkwood/network-console.cfg @@ -11,8 +11,12 @@ dns-320: cat $(TEMP_KERNEL) $(TEMP_DTBS)/kirkwood-dns320.dtb > $(TEMP)/dns-320/vmlinuz-dns320 mkimage -A arm -O linux -T kernel -C none -e 0x00008000 -a 0x00008000 -n "Debian kernel" -d $(TEMP)/dns-320/vmlinuz-dns320 $(TEMP)/dns-320/kernel.uboot cp $(TEMP)/dns-320/vmlinuz-dns320 $(TEMP)/dns-320/kernel.uboot $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/uImage + # no more than 5M + test $$(stat -s %s $(TEMP)/dns-320/kernel.uboot) -le 5242880 mkimage -A arm -O linux -T ramdisk -C gzip -e 0x00e00000 -a 0x00e00000 -n "debian-installer ramdisk" -d $(TEMP_INITRD) $(TEMP)/dns-320/initrd.uboot cp $(TEMP)/dns-320/vmlinuz-dns320 $(TEMP)/dns-320/initrd.uboot $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/uInitrd + # no more than 5M + test $$(stat -s %s $(TEMP)/dns-320/initrd.uboot) -le 5242880 mkdns323fw -k $(TEMP)/dns-320/kernel.uboot -i $(TEMP)/dns-320/initrd.uboot -t DNS-320 -o $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/flash-debian update-manifest $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/flash-debian "installer image (dlink firmware) for D-Link DNS-320" update-manifest $(SOME_DEST)/$(EXTRANAME)/d-link/dns-320/uImage "kernel for D-Link DNS-320" -- 2.0.0
