Package: src:linux
Version: 3.16.3-2~bpo70+1
Severity: critical
Justification: breaks unrelated software
Dear Maintainer,
first of all thank you for your attention.
my system is an HP Proliant DL160G6, with a P212 SAS card.
attached on the external connector of the SAS controller is a MSL2024
tape library equipped with one Ultrium-3 LTO SAS drive.
everything was working flawlessly until i did update from "3.14-0.bpo.2-amd64
3.14.15-2~bpo70+1" to
"3.16-0.bpo.2-amd64 3.16.3-2~bpo70+1"
after rebooting I found that /dev/changer is not created by udev.
even after trying
# mknod changer c 21 4
I got no good.
lsscsi does not list the autochanger nor hpacucli does.
this makes impossible to use Bacula software and to regularly run scheduled
backups.
the only way I found to work around this issue is to boot the previous version
of the kernel.
-- Package-specific info:
** Version:
Linux version 3.16-0.bpo.2-amd64 (debian-ker...@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.16.3-2~bpo70+1 (2014-09-21)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16-0.bpo.2-amd64 root=/dev/mapper/linsvr003-root ro
rootdelay=3 i8042.noaux consoleblank=0
** Tainted: I (2048)
* Working around severe firmware bug.
** Kernel log:
[ 11.610810] udevd[1833]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 11.614457] udevd[1852]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 11.632825] tun: Universal TUN/TAP device driver, 1.6
[ 11.632940] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 11.978102] udevd[2183]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 11.989062] udevd[2186]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 12.032160] uvesafb: Matrox, MGA-G200, 00, OEM: Matrox Graphics Inc., VBE
v3.0
[ 12.037983] udevd[2193]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 12.066164] udevd[2197]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 12.089092] uvesafb: VBIOS/hardware doesn't support DDC transfers
[ 12.089237] uvesafb: no monitor limits have been set, default refresh rate
will be used
[ 12.089562] uvesafb: scrolling: redraw
[ 12.090842] udevd[2200]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 12.150473] udevd[2201]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 12.175574] udevd[2203]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 12.792465] Console: switching to colour frame buffer device 80x30
[ 12.826210] uvesafb: framebuffer at 0xf8000000, mapped to
0xffffc90013900000, using 7500k, total 8128k
[ 12.836864] fb0: VESA VGA frame buffer device
[ 12.910555] udevd[2220]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 13.110444] udevd[2239]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 13.231996] udevd[2250]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 13.311455] udevd[2255]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 13.500379] udevd[2264]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 13.730535] udevd[2288]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 13.755156] udevd[2332]: failed to execute
'/lib/udev/socket:@/org/freedesktop/hal/udev_event'
'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 13.811116] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 13.824245] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 13.830773] EXT4-fs (dm-5): mounting ext3 file system using the ext4
subsystem
[ 13.854816] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts:
(null)
[ 13.867282] EXT4-fs (dm-4): mounting ext3 file system using the ext4
subsystem
[ 13.881476] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
(null)
[ 13.893908] EXT4-fs (dm-2): mounting ext3 file system using the ext4
subsystem
[ 13.912450] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
(null)
[ 13.924796] EXT4-fs (dm-3): mounting ext3 file system using the ext4
subsystem
[ 13.944428] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 13.956890] EXT4-fs (dm-7): mounting ext3 file system using the ext4
subsystem
[ 13.977754] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts:
(null)
[ 13.990802] EXT4-fs (dm-6): mounting ext3 file system using the ext4
subsystem
[ 14.023217] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts:
(null)
[ 18.199205] Bridge firewalling registered
[ 18.239356] device eth0 entered promiscuous mode
[ 18.361418] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.370322] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 21.450108] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: RX/TX
[ 21.461334] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.466914] br0: port 1(eth0) entered forwarding state
[ 21.472464] br0: port 1(eth0) entered forwarding state
[ 21.477900] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 23.121955] Loading iSCSI transport class v2.0-870.
[ 23.195796] fuse init (API version 7.23)
[ 23.226259] iscsi: registered transport (tcp)
[ 23.339271] iscsi: registered transport (iser)
[ 24.042645] ipmi device interface
[ 25.429002] hpasmpld:3410 freeing invalid memtype [mem 0x0009e000-0x0009efff]
[ 28.040649] Bluetooth: Core ver 2.19
[ 28.045014] NET: Registered protocol family 31
[ 28.049367] Bluetooth: HCI device and connection manager initialized
[ 28.053724] Bluetooth: HCI socket layer initialized
[ 28.058104] Bluetooth: L2CAP socket layer initialized
[ 28.062330] Bluetooth: SCO socket layer initialized
[ 28.180290] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.184427] Bluetooth: BNEP filters: protocol multicast
[ 28.188516] Bluetooth: BNEP socket layer initialized
[ 28.293240] Bluetooth: RFCOMM TTY layer initialized
[ 28.297065] Bluetooth: RFCOMM socket layer initialized
[ 28.300867] Bluetooth: RFCOMM ver 1.11
[ 29.226284] Fusion MPT base driver 3.04.20
[ 29.229969] Copyright (c) 1999-2008 LSI Corporation
[ 29.242442] Fusion MPT misc device (ioctl) driver 3.04.20
[ 29.246390] mptctl: Registered with Fusion MPT base driver
[ 29.250216] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 29.624967] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 30.670436] device vnet0 entered promiscuous mode
[ 30.718143] br0: port 2(vnet0) entered forwarding state
[ 30.722434] br0: port 2(vnet0) entered forwarding state
[ 30.878177] device vnet1 entered promiscuous mode
[ 30.926213] br0: port 3(vnet1) entered forwarding state
[ 30.930350] br0: port 3(vnet1) entered forwarding state
[ 39.726573] device vnet2 entered promiscuous mode
[ 39.738741] br0: port 4(vnet2) entered forwarding state
[ 39.738748] br0: port 4(vnet2) entered forwarding state
[ 41.429306] kvm: zapping shadow pages for mmio generation wraparound
[ 46.287325] device vnet3 entered promiscuous mode
[ 46.299741] br0: port 5(vnet3) entered forwarding state
[ 46.299750] br0: port 5(vnet3) entered forwarding state
[ 46.810635] usb 6-4.4: reset low-speed USB device number 7 using ehci-pci
[ 47.810196] kvm: zapping shadow pages for mmio generation wraparound
[ 51.494515] [sched_delayed] \x014CE: hpet increased min_delta_ns to 20115
nsec
[ 51.742636] device vnet4 entered promiscuous mode
[ 51.758723] br0: port 6(vnet4) entered forwarding state
[ 51.758732] br0: port 6(vnet4) entered forwarding state
[ 60.734998] cmaided[4702]: segfault at 0 ip 00007ffb27c2108d sp
00007fffb474cad0 error 4 in libc-2.13.so[7ffb27bb9000+182000]
[ 68.707060] usb 6-4.4: reset low-speed USB device number 7 using ehci-pci
[ 69.279057] usb 6-4.4: reset low-speed USB device number 7 using ehci-pci
[ 286.799670] perf interrupt took too long (2727 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
[ 570.114130] traps: modbus_client[9210] general protection ip:7f2475266c56
sp:7fff05eb5470 error:0 in libmysqlclient.so.18.0.0[7f247522d000+2c0000]
[ 607.768737] modbus_client[9252]: segfault at 8 ip 00007f119ef58c56 sp
00007fff1dbf3b60 error 4 in libmysqlclient.so.18.0.0[7f119ef1f000+2c0000]
[ 614.181351] modbus_client[9253]: segfault at 8 ip 00007f4f37796c56 sp
00007fffe6aef3d0 error 4 in libmysqlclient.so.18.0.0[7f4f3775d000+2c0000]
[ 1697.163162] perf interrupt took too long (5049 > 5000), lowering
kernel.perf_event_max_sample_rate to 25000
[ 2168.144255] usb 2-1: USB disconnect, device number 2
** Model information
sys_vendor: HP
product_name: ProLiant DL160 G6
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: O33
** Loaded modules:
mptctl
mptbase
rfcomm
bnep
bluetooth
6lowpan_iphc
rfkill
ipmi_devintf
hpilo
binfmt_misc
cpuid
ib_iser
rdma_cm
iw_cm
ib_cm
ib_sa
ib_mad
ib_core
ib_addr
iscsi_tcp
libiscsi_tcp
libiscsi
fuse
scsi_transport_iscsi
bridge
stp
llc
uvesafb
vhost_net
tun
vhost
macvtap
macvlan
nbd
loop
sr_mod
cdrom
ftdi_sio
usbserial
hid_generic
usbhid
hid
coretemp
kvm_intel
igb
kvm
osst
ttm
drm_kms_helper
drm
ptp
iTCO_wdt
pps_core
iTCO_vendor_support
dca
tpm_infineon
sg
i2c_algo_bit
evdev
st
i2c_core
ipmi_si
uhci_hcd
ehci_pci
ehci_hcd
tpm_tis
usbcore
ipmi_msghandler
ahci
crc32c_intel
libahci
pcspkr
usb_common
libata
tpm
button
i7core_edac
acpi_cpufreq
lpc_ich
edac_core
mfd_core
processor
thermal_sys
ext4
crc16
mbcache
jbd2
dm_mod
sd_mod
crc_t10dif
crct10dif_common
hpsa
scsi_mod
shpchp
** Network interface configuration:
auto lo
iface lo inet loopback
auto br0
iface br0 inet static
address 192.168.0.6
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.2
dns-nameservers 192.168.0.2
dns-search azimballaggi.com
bridge_ports eth0
bridge_stp off
bridge_maxwait 0
bridge_fd 0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state
UP group default qlen 1000
link/ether 78:e7:d1:5e:af:2a brd ff:ff:ff:ff:ff:ff
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group
default qlen 1000
link/ether 78:e7:d1:5e:af:2b brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group
default
link/ether 78:e7:d1:5e:af:2a brd ff:ff:ff:ff:ff:ff
inet 192.168.0.6/24 brd 192.168.0.255 scope global br0
valid_lft forever preferred_lft forever
inet6 2001:1418:243:0:7ae7:d1ff:fe5e:af2a/64 scope global mngtmpaddr
dynamic
valid_lft 86159sec preferred_lft 14159sec
inet6 fe80::7ae7:d1ff:fe5e:af2a/64 scope link
valid_lft forever preferred_lft forever
5: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
br0 state UNKNOWN group default qlen 500
link/ether fe:54:00:96:1c:35 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fe96:1c35/64 scope link
valid_lft forever preferred_lft forever
6: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
br0 state UNKNOWN group default qlen 500
link/ether fe:54:00:96:1c:36 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fe96:1c36/64 scope link
valid_lft forever preferred_lft forever
7: vnet2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
br0 state UNKNOWN group default qlen 500
link/ether fe:54:00:96:1c:34 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fe96:1c34/64 scope link
valid_lft forever preferred_lft forever
8: vnet3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
br0 state UNKNOWN group default qlen 500
link/ether fe:54:00:d8:f2:33 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fed8:f233/64 scope link
valid_lft forever preferred_lft forever
9: vnet4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
br0 state UNKNOWN group default qlen 500
link/ether fe:54:00:96:1c:09 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fe96:1c09/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
vnet0: 83013159 861227 0 0 0 0 0 0 1159461982
1418607 0 0 0 0 0 0
eth0: 3357549424 6356854 0 10819 0 0 0 81387
2619032129 5425971 0 0 0 0 0 0
vnet2: 8465801 34562 0 0 0 0 0 0 42692279
257441 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
vnet4: 36629340 69574 0 0 0 0 0 0 65172622
291548 0 0 0 0 0 0
br0: 2091838302 4382946 0 0 0 0 0 0 2459567304
3811184 0 0 0 0 0 0
vnet1: 27577790 119395 0 0 0 0 0 0 64487568
356668 0 0 0 0 0 0
lo: 4837497754 952689 0 0 0 0 0 0 4837497754
952689 0 0 0 0 0 0
vnet3: 755549 10293 0 0 0 0 0 0 41507983
269772 0 0 0 0 0 0
*** Protocol statistics:
Ip:
5211850 total packets received
38889 with invalid addresses
0 forwarded
0 incoming packets discarded
5131676 incoming packets delivered
4720413 requests sent out
Icmp:
138 ICMP messages received
3 input ICMP message failed.
ICMP input histogram:
destination unreachable: 111
echo requests: 27
125 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 98
echo replies: 27
IcmpMsg:
InType3: 111
InType8: 27
OutType0: 27
OutType3: 98
Tcp:
9890 active connections openings
17250 passive connection openings
468 failed connection attempts
688 connection resets received
33 connections established
4792287 segments received
5171829 segments send out
9992 segments retransmited
0 bad segments received.
566 resets sent
Udp:
358162 packets received
27 packets to unknown port received.
0 packet receive errors
284869 packets sent
UdpLite:
TcpExt:
11 invalid SYN cookies received
269 packets pruned from receive queue because of socket buffer overrun
49 ICMP packets dropped because they were out-of-window
9520 TCP sockets finished time wait in fast timer
53413 delayed acks sent
14 delayed acks further delayed because of locked socket
Quick ack mode was activated 1101 times
336754 packets directly queued to recvmsg prequeue.
550599 bytes directly in process context from backlog
667097695 bytes directly received in process context from prequeue
2064626 packet headers predicted
204505 packets header predicted and directly queued to user
555486 acknowledgments not containing data payload received
1591766 predicted acknowledgments
6 times recovered from packet loss by selective acknowledgements
Detected reordering 1 times using FACK
1 congestion windows partially recovered using Hoe heuristic
4 congestion windows recovered without slow start by DSACK
3 congestion windows recovered without slow start after partial ack
6 fast retransmits
1 forward retransmits
11 other TCP timeouts
TCPLossProbes: 10309
TCPLossProbeRecovery: 9031
1040 packets collapsed in receive queue due to low socket buffer
1117 DSACKs sent for old packets
9904 DSACKs received
1 DSACKs for out of order packets received
11 connections reset due to unexpected data
1 connections reset due to early user close
14 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 9282
TCPSackMerged: 1
TCPSackShiftFallback: 18
TCPDeferAcceptDrop: 543
TCPRcvCoalesce: 205346
TCPOFOQueue: 65
TCPSpuriousRtxHostQueues: 2
TCPAutoCorking: 129922
TCPFromZeroWindowAdv: 5
TCPToZeroWindowAdv: 5
TCPWantZeroWindowAdv: 22449
TCPSynRetrans: 1
TCPOrigDataSent: 4497010
IpExt:
InBcastPkts: 63386
OutBcastPkts: 3859
InOctets: -1675854885
OutOctets: -1352653450
InBcastOctets: 11357904
OutBcastOctets: 458094
InNoECTPkts: 5962099
InECT1Pkts: 4
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corp. 5520 I/O Hub to ESI Port [8086:3406]
(rev 13)
Subsystem: Hewlett-Packard Company ProLiant G6 series [103c:330b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corp. 5520/5500/X58 I/O Hub PCI Express Root
Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corp. 5520/5500/X58 I/O Hub PCI Express Root
Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbc00000-fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corp. 5520/5500/X58 I/O Hub PCI Express Root
Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Intel Corp. 7500/5520/5500/X58 I/O Hub PCI Express
Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: c0400000-c05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Intel Corp. 7500/5520/5500/X58 I/O Hub PCI Express
Root Port 10 [8086:3411] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 PIC [0800]: Intel Corp. 7500/5520/5500/X58 I/O Hub System Management
Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: i7core_edac
00:14.1 PIC [0800]: Intel Corp. 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad
Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corp. 7500/5520/5500/X58 I/O Hub Control Status and
RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corp. 82801JI (ICH10 Family) USB UHCI
Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company ProLiant G6 series [103c:330b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corp. 82801JI (ICH10 Family) USB2 EHCI
Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company ProLiant G6 series [103c:330b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at faff8000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1c.0 PCI bridge [0604]: Intel Corp. 82801JI (ICH10 Family) PCI Express Root
Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0000000-c03fffff
Prefetchable memory behind bridge: 00000000f9f00000-00000000f9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corp. 82801JI (ICH10 Family) PCI Express Root
Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fb000000-fbafffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corp. 82801JI (ICH10 Family) USB UHCI
Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company ProLiant G6 series [103c:330b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corp. 82801JI (ICH10 Family) USB UHCI
Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company ProLiant G6 series [103c:330b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corp. 82801JI (ICH10 Family) USB UHCI
Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company ProLiant G6 series [103c:330b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corp. 82801JI (ICH10 Family) USB2 EHCI
Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company ProLiant G6 series [103c:330b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at faffa000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corp. 82801 PCI Bridge [8086:244e] (rev 90)
(prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corp. 82801JIR (ICH10R) LPC Interface
Controller [8086:3a16]
Subsystem: Hewlett-Packard Company ProLiant G6 series [103c:330b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corp. 82801JI (ICH10 Family) SATA AHCI
Controller [8086:3a22] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company ProLiant G6 series [103c:330b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 74
Region 0: I/O ports at c880 [size=8]
Region 1: I/O ports at c800 [size=4]
Region 2: I/O ports at c480 [size=8]
Region 3: I/O ports at c400 [size=4]
Region 4: I/O ports at c080 [size=32]
Region 5: Memory at faffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
02:00.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA
G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Emulex Corporation Device [19a2:0100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fbafc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fb000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at fbae0000 [disabled] [size=64K]
Capabilities: <access denied>
05:00.0 Ethernet controller [0200]: Intel Corp. 82576 Gigabit Network
Connection [8086:10c9] (rev 01)
Subsystem: Hewlett-Packard Company NC362i Integrated Dual port Gigabit
Server Adapter [103c:323f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at c0400000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at c0420000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d880 [size=32]
Region 3: Memory at c04c0000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at c0440000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: igb
05:00.1 Ethernet controller [0200]: Intel Corp. 82576 Gigabit Network
Connection [8086:10c9] (rev 01)
Subsystem: Hewlett-Packard Company NC362i Integrated Dual port Gigabit
Server Adapter [103c:323f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 42
Region 0: Memory at c0460000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at c0480000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at dc00 [size=32]
Region 3: Memory at c0504000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at c04a0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: igb
07:00.0 RAID bus controller [0104]: Hewlett-Packard Company Smart Array G6
controllers [103c:323a] (rev 01)
Subsystem: Hewlett-Packard Company Smart Array P212 [103c:3241]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fbc00000 (64-bit, non-prefetchable) [size=2M]
Region 2: Memory at fbeff000 (64-bit, non-prefetchable) [size=4K]
Region 4: I/O ports at e800 [size=256]
Expansion ROM at fbe00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: hpsa
fe:00.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QuickPath
Architecture Generic Non-Core Registers [8086:2c40] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:00.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QuickPath
Architecture System Address Decoder [8086:2c01] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:02.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QPI Link 0
[8086:2c10] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:02.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QPI Physical 0
[8086:2c11] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:02.4 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QPI Link 1
[8086:2c14] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:02.5 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QPI Physical 1
[8086:2c15] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:03.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller [8086:2c18] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:03.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Target Address Decoder [8086:2c19] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:03.2 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller RAS Registers [8086:2c1a] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:03.4 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Test Registers [8086:2c1c] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:04.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Control Registers [8086:2c20] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:04.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Address Registers [8086:2c21] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:04.2 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Rank Registers [8086:2c22] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:04.3 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:05.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Control Registers [8086:2c28] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:05.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Address Registers [8086:2c29] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:05.2 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Rank Registers [8086:2c2a] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:05.3 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:06.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Control Registers [8086:2c30] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:06.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Address Registers [8086:2c31] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:06.2 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Rank Registers [8086:2c32] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:06.3 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QuickPath
Architecture Generic Non-Core Registers [8086:2c40] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QuickPath
Architecture System Address Decoder [8086:2c01] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QPI Link 0
[8086:2c10] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QPI Physical 0
[8086:2c11] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.4 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QPI Link 1
[8086:2c14] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.5 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 QPI Physical 1
[8086:2c15] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller [8086:2c18] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Target Address Decoder [8086:2c19] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.2 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller RAS Registers [8086:2c1a] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.4 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Test Registers [8086:2c1c] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Control Registers [8086:2c20] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Address Registers [8086:2c21] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.2 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Rank Registers [8086:2c22] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.3 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Control Registers [8086:2c28] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Address Registers [8086:2c29] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.2 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Rank Registers [8086:2c2a] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.3 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.0 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Control Registers [8086:2c30] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.1 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Address Registers [8086:2c31] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.2 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Rank Registers [8086:2c32] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.3 Host bridge [0600]: Intel Corp. Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05)
Subsystem: Intel Corp. Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 006 Device 007: ID 04b9:0300 Rainbow Technologies, Inc. SafeNet USB
SuperPro/UltraPro
Bus 006 Device 006: ID 13ba:0017 PCPlay PS/2 Keyboard+Mouse Adapter
Bus 006 Device 005: ID 0403:6010 Future Technology Devices International, Ltd
FT2232C Dual USB-UART/FIFO IC
Bus 006 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 006 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 006 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.7
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-0.bpo.2-amd64 (SMP w/8 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-0.bpo.2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.16-0.bpo.2-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.16-0.bpo.2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-0.bpo.2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf-show failed
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
