Package: gnome-disk-utility
Version: 3.12.1-1+b1
Severity: important
I cannot create a partition on my USB key. System is brand new jessie/amd64.
Steps:
- Plug the USB key
- Start `gnome-disks` from a console
- Select the USB key (left panel)
- Hit 'Ctrl+F' to format, pick the default selection (MBR)
- Click the gears icon (under partition), pick the default selection,
choose name 'DEBIAN'
A message box should appear with:
[...]
Error creating partition
Error wiping newly created partition /dev/sdf1: Command-line `wipefs
-a "/dev/sdf1"' exited with non-zero exit status 1: wipefs: error:
/dev/sdf1: probing initialization failed: No such file or directory
(udisks-error-quark, 0)
[...]
There is nothing more in dmesg, nor on the console, except a few warnings:
$ gnome-disks
** (gnome-disks:3887): CRITICAL **: atk_object_ref_state_set:
assertion 'ATK_IS_OBJECT (accessible)' failed
(gnome-disks:3887): Gtk-CRITICAL **: gtk_accessible_get_widget:
assertion 'GTK_IS_ACCESSIBLE (accessible)' failed
** (gnome-disks:3887): CRITICAL **: atk_object_ref_state_set:
assertion 'ATK_IS_OBJECT (accessible)' failed
(gnome-disks:3887): Gtk-CRITICAL **: gtk_accessible_get_widget:
assertion 'GTK_IS_ACCESSIBLE (accessible)' failed
If that matters:
$ sudo lsusb -d 18a5:0243 -v
Bus 002 Device 006: ID 18a5:0243 Verbatim, Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x18a5 Verbatim, Ltd
idProduct 0x0243
bcdDevice 1.10
iManufacturer 1 Verbatim
iProduct 2 STORE N GO
iSerial 3 07072B0DA2443603
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 498mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 2
Lowest fully-functional device speed is High Speed (480Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Device Status: 0x0000
(Bus Powered)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
