Package: wpasupplicant Version: 2.3-1 Severity: important Dear Maintainer,
after upgrading wpasupplicant from version 1.1-1 to version 2.3-1 wpasupplicant fails to establish a WLAN connection: # wpa_supplicant -dd -ieth1 -c/tmp/wpa_supplicant.conf wpa_supplicant v2.3 random: Trying to read entropy from /dev/random Successfully initialized wpa_supplicant Initializing interface 'eth1' conf '/tmp/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/tmp/wpa_supplicant.conf' -> '/tmp/wpa_supplicant.conf' Reading configuration file '/tmp/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' Line: 3 - start of a new network block ssid - hexdump_ascii(len=4): 74 65 73 74 test PSK - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='test' rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 rfkill: initial event: idx=1 type=2 op=0 soft=0 hard=0 nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl80211: Supported cipher 00-0f-ac:2 nl80211: Supported cipher 00-0f-ac:4 nl80211: Driver does not support authentication/association or connect commands nl80211: Remove monitor interface: refcount=0 netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) nl80211: Set mode ifindex 3 iftype 2 (STATION) eth1: Failed to initialize driver interface Failed to add interface eth1 eth1: Cancelling scan request eth1: Cancelling authentication timeout # cat /tmp/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="test" #psk="12345678" psk=fe727aa8b64ac9b3f54c72432da14faed933ea511ecab15bbc6c52e7522f709a } The system is a HP Compaq nx8220. WLAN device: 02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) Loaded kernel modules: ipw2200, libipw, cfg80211, lib80211 Almost all WLANs require WPA and a notebook without working WLAN is rather useless, hence severity important. I don't know what other information could be useful so please tell me if you need anything else. Regards Uwe -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (750, 'testing'), (650, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.16.0-4-686-pae (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages wpasupplicant depends on: ii adduser 3.113+nmu3 ii libc6 2.19-13 ii libdbus-1-3 1.8.10-1 ii libnl-3-200 3.2.24-2 ii libnl-genl-3-200 3.2.24-2 ii libpcsclite1 1.8.13-1 ii libreadline6 6.3-8+b1 ii libssl1.0.0 1.0.1j-1 ii lsb-base 4.1+Debian13+nmu1 wpasupplicant recommends no packages. Versions of packages wpasupplicant suggests: pn libengine-pkcs11-openssl <none> ii wpagui 2.3-1 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org