Package: src:linux
Version: 3.16.7-ckt4-1
Severity: minor
On this system (HP EliteBook 840), a shutdown/halt results instead in a reboot.
This has been true for all the 3.16.* kernels so far available on Debian.
Is there anything I can do to help debug this issue?
Thanks.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-1 (2015-01-16)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/root-root ro
acpi_backlight=vendor quiet
** Not tainted
** Kernel log:
[ 20.611323] i915 0000:00:02.0: registered panic notifier
[ 20.680074] usb 2-5: new full-speed USB device number 3 using xhci_hcd
[ 20.809770] usb 2-5: New USB device found, idVendor=138a, idProduct=003f
[ 20.809774] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 20.809776] usb 2-5: SerialNumber: 003048b2c794
[ 20.838379] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id:
0x1e2b1, caps: 0xd00123/0x840300/0x26800, board id: 2768, fw id: 1478018
[ 20.840326] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 20.875501] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio3/input/input18
[ 20.976320] usb 2-7: new high-speed USB device number 4 using xhci_hcd
[ 21.212651] input: ST LIS3LV02DL Accelerometer as
/devices/platform/lis3lv02d/input/input20
[ 21.229823] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.229990] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
[ 21.230089] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.230759] snd_hda_intel 0000:00:03.0: irq 69 for MSI/MSI-X
[ 21.240672] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card1/input22
[ 21.240758] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card1/input23
[ 21.240829] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card1/input24
[ 21.247656] usb 2-7: New USB device found, idVendor=05c8, idProduct=0369
[ 21.247659] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 21.247661] usb 2-7: Product: HP HD Webcam
[ 21.247662] usb 2-7: Manufacturer: SunplusIT INC.
[ 21.322694] media: Linux media interface: v0.10
[ 21.325787] Linux video capture interface: v2.00
[ 21.330250] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
[ 21.338757] input: HP HD Webcam as
/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input25
[ 21.338834] usbcore: registered new interface driver uvcvideo
[ 21.338836] USB Video Class driver (1.1.1)
[ 21.444863] usb 2-3.2: new full-speed USB device number 6 using xhci_hcd
[ 21.534101] usb 2-3.2: New USB device found, idVendor=8087, idProduct=07dc
[ 21.534104] usb 2-3.2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 21.541870] Bluetooth: Core ver 2.19
[ 21.541882] NET: Registered protocol family 31
[ 21.541883] Bluetooth: HCI device and connection manager initialized
[ 21.541889] Bluetooth: HCI socket layer initialized
[ 21.541891] Bluetooth: L2CAP socket layer initialized
[ 21.541901] Bluetooth: SCO socket layer initialized
[ 21.545328] usbcore: registered new interface driver btusb
[ 21.558415] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 21.558889] bluetooth hci0: firmware: direct-loading firmware
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 21.558895] Bluetooth: hci0: Intel Bluetooth firmware file:
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 21.621004] usb 2-3.3: new high-speed USB device number 7 using xhci_hcd
[ 21.665541] Bluetooth: hci0: Intel Bluetooth firmware patch completed and
activated
[ 21.712466] usb 2-3.3: New USB device found, idVendor=0451, idProduct=8043
[ 21.712469] usb 2-3.3: New USB device strings: Mfr=0, Product=0,
SerialNumber=1
[ 21.712470] usb 2-3.3: SerialNumber: 9D0500616890
[ 21.712840] hub 2-3.3:1.0: USB hub found
[ 21.712894] hub 2-3.3:1.0: 3 ports detected
[ 21.985405] usb 2-3.3.1: new low-speed USB device number 8 using xhci_hcd
[ 22.078055] usb 2-3.3.1: New USB device found, idVendor=046d, idProduct=c016
[ 22.078060] usb 2-3.3.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 22.078062] usb 2-3.3.1: Product: Optical USB Mouse
[ 22.078063] usb 2-3.3.1: Manufacturer: Logitech
[ 22.078269] usb 2-3.3.1: ep 0x81 - rounding interval to 64 microframes, ep
desc says 80 microframes
[ 22.085084] hidraw: raw HID events driver (C) Jiri Kosina
[ 22.087987] usbcore: registered new interface driver usbhid
[ 22.087990] usbhid: USB HID core driver
[ 22.090063] input: Logitech Optical USB Mouse as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3.1/2-3.3.1:1.0/0003:046D:C016.0001/input/input26
[ 22.090196] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10
Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-3.3.1/input0
[ 22.149640] usb 2-3.3.2: new full-speed USB device number 9 using xhci_hcd
[ 22.241022] usb 2-3.3.2: New USB device found, idVendor=05f3, idProduct=0081
[ 22.241026] usb 2-3.3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 22.241028] usb 2-3.3.2: Product: Kinesis Keyboard Hub
[ 22.241030] usb 2-3.3.2: Manufacturer: PI Engineering
[ 22.241160] usb 2-3.3.2: ep 0x81 - rounding interval to 1024 microframes, ep
desc says 2040 microframes
[ 22.241644] hub 2-3.3.2:1.0: USB hub found
[ 22.242018] hub 2-3.3.2:1.0: 4 ports detected
[ 22.313872] usb 2-3.3.3: new high-speed USB device number 10 using xhci_hcd
[ 22.402515] usb 2-3.3.3: New USB device found, idVendor=0451, idProduct=8043
[ 22.402519] usb 2-3.3.3: New USB device strings: Mfr=0, Product=0,
SerialNumber=1
[ 22.402521] usb 2-3.3.3: SerialNumber: 0B0808716890
[ 22.403191] hub 2-3.3.3:1.0: USB hub found
[ 22.403213] hub 2-3.3.3:1.0: 3 ports detected
[ 22.515106] usb 2-3.3.2.2: new full-speed USB device number 11 using xhci_hcd
[ 22.613982] usb 2-3.3.2.2: New USB device found, idVendor=05f3,
idProduct=0007
[ 22.613986] usb 2-3.3.2.2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 22.618011] input: HID 05f3:0007 as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3.2/2-3.3.2.2/2-3.3.2.2:1.0/0003:05F3:0007.0002/input/input27
[ 22.618156] hid-generic 0003:05F3:0007.0002: input,hidraw1: USB HID v1.00
Keyboard [HID 05f3:0007] on usb-0000:00:14.0-3.3.2.2/input0
[ 22.624966] input: HID 05f3:0007 as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3.2/2-3.3.2.2/2-3.3.2.2:1.1/0003:05F3:0007.0003/input/input28
[ 22.625171] hid-generic 0003:05F3:0007.0003: input,hidraw2: USB HID v1.00
Device [HID 05f3:0007] on usb-0000:00:14.0-3.3.2.2/input1
[ 22.857478] systemd-journald[281]: Received request to flush runtime journal
from PID 1
[ 22.959033] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.963994] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 22.972355] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 23.356137] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 23.356357] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 23.368891] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.831574] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 6 ep 4 with no
TDs queued?
[ 24.056384] wlan0: authenticate with 64:d8:14:6e:08:b0
[ 24.059387] wlan0: send auth to 64:d8:14:6e:08:b0 (try 1/3)
[ 24.062414] wlan0: authenticated
[ 24.063670] wlan0: associate with 64:d8:14:6e:08:b0 (try 1/3)
[ 24.067499] wlan0: RX AssocResp from 64:d8:14:6e:08:b0 (capab=0x411 status=0
aid=1)
[ 24.067779] wlan0: associated
[ 24.067805] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.067850] cfg80211: Calling CRDA to update world regulatory domain
[ 24.762014] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
None
[ 24.762043] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.497625] wlan0: deauthenticating from 64:d8:14:6e:08:b0 by local choice
(Reason: 3=DEAUTH_LEAVING)
[ 27.513662] cfg80211: Calling CRDA for country: IT
[ 27.514364] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
** Model information
sys_vendor: Hewlett-Packard
product_name: HP EliteBook 840 G1
product_version: A3008DD10B03
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: L71 Ver. 01.21
board_vendor: Hewlett-Packard
board_name: 198F
board_version: KBC Version 15.55
** Loaded modules:
ctr
ccm
xt_connmark
iptable_nat
nf_nat_ipv4
nf_nat
iptable_mangle
cpufreq_powersave
cpufreq_conservative
binfmt_misc
cpufreq_userspace
cpufreq_stats
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
iptable_filter
ip_tables
x_tables
hid_generic
usbhid
hid
ecb
btusb
bluetooth
6lowpan_iphc
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
snd_hda_codec_hdmi
joydev
btrfs
xor
hp_wmi
sparse_keymap
tpm_infineon
arc4
snd_hda_codec_idt
snd_hda_codec_generic
iTCO_wdt
iTCO_vendor_support
rtsx_pci_sdmmc
rtsx_pci_ms
memstick
mmc_core
ppdev
raid6_pq
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
kvm
crc32_pclmul
crc32c_intel
iwlmvm
ghash_clmulni_intel
mac80211
pcspkr
psmouse
iwlwifi
evdev
serio_raw
cfg80211
sg
rtsx_pci
rfkill
i915
wmi
parport_pc
battery
parport
hp_accel
lis3lv02d
snd_hda_intel
xhci_hcd
ehci_pci
hp_wireless
input_polldev
snd_hda_controller
ehci_hcd
tpm_tis
snd_hda_codec
tpm
drm_kms_helper
ac
snd_hwdep
e1000e
video
drm
button
snd_pcm
snd_timer
i2c_algo_bit
i2c_i801
lpc_ich
mei_me
usbcore
mei
i2c_core
mfd_core
snd
processor
ptp
pps_core
soundcore
usb_common
shpchp
sch_fq_codel
fuse
ecryptfs
autofs4
ext4
crc16
mbcache
jbd2
dm_crypt
dm_mod
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
aesni_intel
aes_x86_64
glue_helper
lrw
gf128mul
ablk_helper
cryptd
ahci
libahci
libata
scsi_mod
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller
[8086:0a04] (rev 0b)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT
Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA
controller])
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 68
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller
[8086:0a0c] (rev 0b)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 69
Region 0: Memory at d0730000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC
[8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 66
Region 0: Memory at d0720000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0
[8086:9c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 62
Region 0: Memory at d0739000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 8 Series HECI KT
[8086:9c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 30b0 [size=8]
Region 1: Memory at d073f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection
I218-LM [8086:155a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 63
Region 0: Memory at d0700000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d073e000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller
[8086:9c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 67
Region 0: Memory at d0734000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1
[8086:9c10] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d0600000-d06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 4
[8086:9c16] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d0500000-d05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 6
[8086:9c1a] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0400000-d04fffff
Prefetchable memory behind bridge: 00000000bf300000-00000000bf4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1
[8086:9c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d073d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller
[8086:9c43] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1
[AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 61
Region 0: I/O ports at 30a8 [size=8]
Region 1: I/O ports at 30bc [size=4]
Region 2: I/O ports at 30a0 [size=8]
Region 3: I/O ports at 30b8 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at d073c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series SMBus Controller [8086:9c22]
(rev 04)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0738000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ef80 [size=32]
02:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1]
(rev 73)
Subsystem: Intel Corporation Dual Band Wireless-N 7260 [8086:4060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 65
Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI
Express Card Reader [10ec:5227] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Physical Slot: 5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 64
Region 0: Memory at d0400000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
** USB devices:
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0424:5534 Standard Microsystems Corp.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 05c8:0369 Cheng Uei Precision Industry Co., Ltd
(Foxlink)
Bus 002 Device 003: ID 138a:003f Validity Sensors, Inc.
Bus 002 Device 010: ID 0451:8043 Texas Instruments, Inc.
Bus 002 Device 011: ID 05f3:0007 PI Engineering, Inc. Kinesis Advantage PRO
MPC/USB Keyboard
Bus 002 Device 009: ID 05f3:0081 PI Engineering, Inc. Kinesis Integrated Hub
Bus 002 Device 008: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 007: ID 0451:8043 Texas Instruments, Inc.
Bus 002 Device 006: ID 8087:07dc Intel Corp.
Bus 002 Device 002: ID 0424:2134 Standard Microsystems Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers unstable
APT policy: (900, 'unstable'), (800, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.55
ii initramfs-tools [linux-initramfs-tool] 0.118
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-20
ii linux-doc-3.16 3.16.7-ckt4-1
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
