Package: src:linux
Version: 3.2.65-1+deb7u1
Followup-For: Bug #687821

I've had the same problem recently with two different machines, both fresh
installs following the guided "encrypted LVM-partitioning" in the installer.
It's guite problematic not to be able to update the kernel on a default
install, and I guess this affects quite many people.

On both machines I've tried, it seems that the root-partition is made very
small (322 M) by the partitioner during the install, even on systems where
there's plenty of space to make the root-partition bigger.

I propose that this bug gets moved somewhere to partman / guided-install-
process, as it doesn't seem to be a problem only concerning this particular
package (I've experience the problem both on i868 and adm64).

Best regards,
Emil



-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3 
(Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u1

** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/jazzzbox-root ro quiet

** Tainted: I (2048)
 * Working around severe firmware bug.

** Kernel log:
[   11.737533] iwlwifi 0000:02:00.0: Detected Intel(R) Ultimate N WiFi Link 
5300 AGN, REV=0x24
[   11.737633] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   11.749341] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   11.758305] iwlwifi 0000:02:00.0: device EEPROM VER=0x11f, CALIB=0x4
[   11.758312] iwlwifi 0000:02:00.0: Device SKU: 0Xf0
[   11.758361] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a 
channels
[   11.769689] Bluetooth: Core ver 2.16
[   11.769740] NET: Registered protocol family 31
[   11.769746] Bluetooth: HCI device and connection manager initialized
[   11.769753] Bluetooth: HCI socket layer initialized
[   11.769758] Bluetooth: L2CAP socket layer initialized
[   11.770107] Bluetooth: SCO socket layer initialized
[   11.775858] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   11.776266] usbcore: registered new interface driver btusb
[   11.800915] yenta_cardbus 0000:85:09.2: ISA IRQ mask 0x0cb8, PCI irq 22
[   11.800924] yenta_cardbus 0000:85:09.2: Socket status: 30000810
[   11.800933] pci_bus 0000:85: Raising subordinate bus# of parent bus (#85) 
from #86 to #89
[   11.800952] yenta_cardbus 0000:85:09.2: pcmcia: parent PCI bridge window: 
[io  0x2000-0x2fff]
[   11.800961] yenta_cardbus 0000:85:09.2: pcmcia: parent PCI bridge window: 
[mem 0xd8500000-0xd85fffff]
[   11.800969] pcmcia_socket pcmcia_socket0: cs: memory probe 
0xd8500000-0xd85fffff: excluding 0xd8500000-0xd850ffff
[   11.801009] yenta_cardbus 0000:85:09.2: pcmcia: parent PCI bridge window: 
[mem 0xdc000000-0xdfffffff pref]
[   11.801017] pcmcia_socket pcmcia_socket0: cs: memory probe 
0xdc000000-0xdfffffff: excluding 0xdc000000-0xdfffffff
[   11.806948] iwlwifi 0000:02:00.0: firmware: agent loaded 
iwlwifi-5000-5.ucode into memory
[   11.806962] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 
33692
[   11.807934] Registered led device: phy0-led
[   11.834826] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   11.840369] input: HP WMI hotkeys as /devices/virtual/input/input6
[   11.861634] pcmcia_socket pcmcia_socket0: cs: memory probe 
0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[   11.861717] pcmcia_socket pcmcia_socket0: cs: memory probe 
0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[   11.861795] pcmcia_socket pcmcia_socket0: cs: memory probe 
0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   12.184216] tpm_tis 00:04: [Hardware Error]: Adjusting reported timeouts: A 
750->750000us B 2000->2000000us C 750->750000us D 750->750000us
[   12.244167] tpm_tis 00:04: Adjusting TPM timeout parameters.
[   12.432899] fbcon: inteldrmfb (fb0) is primary device
[   12.516235] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.0, id: 
0x1c0b1, caps: 0xd04791/0xb00000/0x20000
[   12.516251] psmouse serio4: synaptics: serio: Synaptics pass-through port at 
isa0060/serio4/input0
[   12.560050] input: SynPS/2 Synaptics TouchPad as 
/devices/platform/i8042/serio4/input/input7
[   12.704291] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into 
slot 0
[   12.704304] pcmcia_socket pcmcia_socket0: cs: memory probe 
0xd8510000-0xd85fffff: excluding 0xd85fe000-0xd860bfff
[   12.711966] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 22)
[   12.763077] Console: switching to colour frame buffer device 160x50
[   12.767151] scsi6 : pata_pcmcia
[   12.767301] ata7: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 22
[   12.775234] fb0: inteldrmfb frame buffer device
[   12.775239] drm: registered panic notifier
[   12.785455] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) 
is beyond end of object (20110623/exoparg2-418)
[   12.785489] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] 
(Node ffff880136e70998), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[   12.785518] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD 
(20110623/video-1199)
[   12.788852] acpi device:05: registered as cooling_device2
[   12.789383] input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   12.789575] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   12.789674] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   12.798070] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[   12.798086] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[   12.798227] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   12.798297] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   13.219491] input: HDA Digital PCBeep as 
/devices/pci0000:00/0000:00:1b.0/input/input9
[   13.356745] parport_pc 00:09: reported by Plug and Play ACPI
[   13.356837] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
[   13.929604] EXT4-fs (dm-1): re-mounted. Opts: (null)
[   14.004963] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   14.125633] loop: module loaded
[   14.873565] Adding 2117628k swap on /dev/mapper/jazzzbox-swap_1.  
Priority:-1 extents:1 across:2117628k SS
[   15.139176] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: 
(null)
[   15.144414] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: 
(null)
[   15.152915] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: 
(null)
[   15.167896] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: 
(null)
[   16.030615] RPC: Registered named UNIX socket transport module.
[   16.030623] RPC: Registered udp transport module.
[   16.030627] RPC: Registered tcp transport module.
[   16.030632] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   16.050221] FS-Cache: Loaded
[   16.088620] FS-Cache: Netfs 'nfs' registered for caching
[   16.106967] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[   17.193800] Non-volatile memory driver v1.3
[   18.080782] input: ACPI Virtual Keyboard Device as 
/devices/virtual/input/input10
[   18.346648] input: PS/2 Generic Mouse as 
/devices/platform/i8042/serio4/serio5/input/input11
[   18.456069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.456076] Bluetooth: BNEP filters: protocol multicast
[   18.464510] Bluetooth: RFCOMM TTY layer initialized
[   18.464520] Bluetooth: RFCOMM socket layer initialized
[   18.464525] Bluetooth: RFCOMM ver 1.11
[   18.617075] lp0: using parport0 (interrupt-driven).
[   18.635807] ppdev: user-space parallel port driver
[   19.312557] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   19.416152] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   19.417849] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.425609] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   19.426006] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
[   19.581452] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   19.581848] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
[   19.645651] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.814240] wlan0: authenticate with 00:23:6a:0c:be:53 (try 1)
[   39.816238] wlan0: authenticated
[   39.818830] wlan0: associate with 00:23:6a:0c:be:53 (try 1)
[   39.822287] wlan0: RX AssocResp from 00:23:6a:0c:be:53 (capab=0x411 status=0 
aid=1)
[   39.822295] wlan0: associated
[   39.831192] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   50.672258] wlan0: no IPv6 routers present
[   81.850773] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = 
00:23:6a:0c:be:53 tid = 0
[ 2935.098605] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = 
00:23:6a:0c:be:53 tid = 6

** Model information
sys_vendor: Hewlett-Packard
product_name: HP EliteBook 6930p
product_version: F.0E
chassis_vendor: Hewlett-Packard
chassis_version: 
bios_vendor: Hewlett-Packard
bios_version: 68PCU Ver. F.0E
board_vendor: Hewlett-Packard
board_name: 30DB
board_version: KBC Version 87.22

** Loaded modules:
ppdev
lp
rfcomm
bnep
nvram
msr
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext2
loop
tpm_infineon
snd_hda_codec_analog
pata_pcmcia
arc4
pcmcia
joydev
btusb
bluetooth
pcspkr
iwlwifi
hp_wmi
snd_hda_intel
sparse_keymap
psmouse
snd_hda_codec
yenta_socket
parport_pc
coretemp
pcmcia_rsrc
serio_raw
parport
pcmcia_core
tpm_tis
snd_hwdep
iTCO_wdt
mac80211
tpm
evdev
i915
tpm_bios
snd_pcm
iTCO_vendor_support
container
snd_page_alloc
snd_seq
cfg80211
hp_accel
snd_seq_device
drm_kms_helper
lis3lv02d
snd_timer
rfkill
input_polldev
battery
wmi
ac
power_supply
drm
snd
video
i2c_algo_bit
i2c_core
soundcore
acpi_cpufreq
mperf
button
processor
ext4
crc16
jbd2
mbcache
cryptd
aes_x86_64
aes_generic
xts
gf128mul
dm_crypt
dm_mod
sg
sr_mod
cdrom
sd_mod
crc_t10dif
thermal
thermal_sys
firewire_ohci
sdhci_pci
sdhci
mmc_core
uhci_hcd
firewire_core
crc_itu_t
ahci
libahci
ata_generic
ehci_hcd
libata
scsi_mod
usbcore
usb_common
e1000e

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory 
Controller Hub [8086:2a40] (rev 07)
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series 
Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA 
controller])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at d8000000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 7138 [size=8]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset 
Integrated Graphics Controller [8086:2a43] (rev 07)
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at d8400000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>

00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series 
Chipset MEI Controller [8086:2a44] (rev 07)
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at d8827000 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>

00:03.2 IDE interface [0101]: Intel Corporation Mobile 4 Series Chipset PT IDER 
Controller [8086:2a46] (rev 07) (prog-if 85 [Master SecO PriO])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 11
        Region 0: I/O ports at 7130 [disabled] [size=8]
        Region 1: I/O ports at 714c [disabled] [size=4]
        Region 2: I/O ports at 7128 [disabled] [size=8]
        Region 3: I/O ports at 7148 [disabled] [size=4]
        Region 4: I/O ports at 7100 [disabled] [size=16]
        Capabilities: <access denied>

00:03.3 Serial controller [0700]: Intel Corporation Mobile 4 Series Chipset AMT 
SOL Redirection [8086:2a47] (rev 07) (prog-if 02 [16550])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 0: I/O ports at 7120 [size=8]
        Region 1: Memory at d8825000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network 
Connection [8086:10f5] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at d8800000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at d8824000 (32-bit, non-prefetchable) [size=4K]
        Region 2: I/O ports at 70e0 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 70c0 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 70a0 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 7080 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI 
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 19
        Region 0: Memory at d8826c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio 
Controller [8086:293e] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 48
        Region 0: Memory at d8820000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: d8700000-d87fffff
        Prefetchable memory behind bridge: 00000000d8f00000-00000000d90fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00008000-00008fff
        Memory behind bridge: d8600000-d86fffff
        Prefetchable memory behind bridge: 00000000d8d00000-00000000d8efffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=43, sec-latency=0
        I/O behind bridge: 00005000-00006fff
        Memory behind bridge: d4000000-d7ffffff
        Prefetchable memory behind bridge: 00000000d8b00000-00000000d8cfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=44, subordinate=84, sec-latency=0
        I/O behind bridge: 00003000-00004fff
        Memory behind bridge: d0000000-d3ffffff
        Prefetchable memory behind bridge: 00000000d8900000-00000000d8afffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 7060 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 22
        Region 4: I/O ports at 7040 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 7020 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI 
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 20
        Region 0: Memory at d8826800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=85, subordinate=89, sec-latency=32
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d8500000-d85fffff
        Prefetchable memory behind bridge: 00000000dc000000-00000000dfffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller 
[8086:2917] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 
4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 45
        Region 0: I/O ports at 7118 [size=8]
        Region 1: I/O ports at 7144 [size=4]
        Region 2: I/O ports at 7110 [size=8]
        Region 3: I/O ports at 7140 [size=4]
        Region 4: I/O ports at 7000 [size=32]
        Region 5: Memory at d8826000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

02:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 
[8086:4236]
        Subsystem: Intel Corporation Device [8086:1011]
        Physical Slot: 1
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 47
        Region 0: Memory at d8600000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: iwlwifi

85:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller 
[1180:0832] (rev 06) (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at d8501000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: firewire_ohci

85:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro 
Host Adapter [1180:0822] (rev 25)
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 22
        Region 0: Memory at d8501900 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: sdhci-pci

85:09.2 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev bb)
        Subsystem: Hewlett-Packard Company Device [103c:30db]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168
        Interrupt: pin B routed to IRQ 22
        Region 0: Memory at d8500000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=85, secondary=86, subordinate=89, sec-latency=176
        Memory window 0: dc000000-dfffffff (prefetchable)
        Memory window 1: f0000000-f3ffffff
        I/O window 0: 00002400-000024ff
        I/O window 1: 00002000-000020ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface 
[Broadcom BCM2045]
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810


-- System Information:
Debian Release: 7.8
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109.1
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn  firmware-linux-free  <none>

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27+deb7u2
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.36+wheezy.1
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information excluded


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to