Package: src:linux Version: 3.16.7-ckt9-3~deb8u1 Severity: important Dear Maintainer,
I have installed debian jessie last week on my laptop. Since then my system hangs when I order it to shutdown. Because of the new init-system I first checked whether systemd was to blame using this guide: http://freedesktop.org/wiki/Software/systemd/Debugging/ I started up in recovery mode and issued the "shutdown" command. All services were shutdown, all processes were killed etc. But the system hanged at the very end, when it needed to go off. I then disabled the system by keeping the power button pressed. I restarted again in recovery mode. This time I issued the "poweroff -f" command. The system failed to poweroff again and kept hanging. The cursor blinked, but I could not ctrl+c and issue new commands. According to the guide this is a kernel issue and not systemd's fault. I did not have this problem on debian wheezy using the default 3.2 linux-kernel. I have attached a sysinfo file in case it may be related to my hardware. Could you please look into this issue? Shutting down is a function I use multiple times per day using this laptop. When the laptop refuses to poweroff it drains the battery and I can't help but feel that forcing it to poweroff with the power button is not healthy for the system. I therefore flagged the bug as "important" and I hope the fix can help other users who are experiencing the same problem. If there is any more information you need I will be glad to help. Thank you very much for considering this problem! Kind regards, Ruben Vorderman -- Package-specific info: ** Version: Linux version 3.16.0-4-686-pae (debian-ker...@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=1d82564a-a25a- 4b84-b057-e832c9e50701 ro quiet ** Tainted: D (128) * Kernel has oopsed before. ** Kernel log: [ 9.597043] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 9.597052] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff [ 9.597091] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 9.597114] clean. [ 9.597136] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 9.597144] excluding 0x60000000-0x600fffff [ 9.597183] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: [ 9.597963] clean. [ 9.640864] fbcon: inteldrmfb (fb0) is primary device [ 10.055024] kvm: disabled by bios [ 10.069384] kvm: disabled by bios [ 10.137246] coretemp coretemp.0: Using relative temperature scale! [ 10.137268] coretemp coretemp.0: Using relative temperature scale! [ 10.203086] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 10.302716] ath5k 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 10.302896] ath5k 0000:04:00.0: registered as 'phy0' [ 10.528154] Console: switching to colour frame buffer device 160x50 [ 10.534748] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 10.534810] i915 0000:00:02.0: registered panic notifier [ 10.548066] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 10.550504] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 10.562243] Adding 3145724k swap on /dev/sda3. Priority:-1 extents:1 across:3145724k FS [ 10.725819] sound hdaudioC0D0: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line [ 10.725911] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.725977] sound hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.726038] sound hdaudioC0D0: mono: mono_out=0x0 [ 10.726088] sound hdaudioC0D0: inputs: [ 10.726130] sound hdaudioC0D0: Internal Mic=0x10 [ 10.726181] sound hdaudioC0D0: Mic=0xd [ 10.789079] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input14 [ 10.791303] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 10.851271] ath: EEPROM regdomain: 0x30 [ 10.851342] ath: EEPROM indicates we should expect a direct regpair map [ 10.851443] ath: Country alpha2 being used: AM [ 10.853829] ath: Regpair used: 0x30 [ 10.933965] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 10.936836] cfg80211: Calling CRDA to update world regulatory domain [ 10.939206] ath5k: phy0: Atheros AR5414 chip found (MAC: 0xa0, PHY: 0x61) [ 11.350473] cfg80211: World regulatory domain updated: [ 11.352889] cfg80211: DFS Master region: unset [ 11.352937] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.357661] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.360071] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.362429] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.364760] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 11.367082] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.369380] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.371651] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.373910] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 11.376190] cfg80211: Calling CRDA for country: AM [ 11.410170] cfg80211: Regulatory domain changed to country: AM [ 11.412458] cfg80211: DFS Master region: ETSI [ 11.412508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.416976] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.419258] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1800 mBm), (N/A) [ 11.421527] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 1800 mBm), (0 s) [ 12.035330] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 12.136376] systemd-journald[166]: Received request to flush runtime journal from PID 1 [ 13.646327] RPC: Registered named UNIX socket transport module. [ 13.648685] RPC: Registered udp transport module. [ 13.650971] RPC: Registered tcp transport module. [ 13.653265] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.696202] FS-Cache: Loaded [ 13.731678] FS-Cache: Netfs 'nfs' registered for caching [ 13.788156] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 20.685396] sky2 0000:02:00.0 eth0: enabling interface [ 20.686591] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.702043] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.756081] usb 3-2: new low-speed USB device number 2 using uhci_hcd [ 20.931103] usb 3-2: New USB device found, idVendor=046d, idProduct=c018 [ 20.931179] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 20.931249] usb 3-2: Product: USB Optical Mouse [ 20.931294] usb 3-2: Manufacturer: Logitech [ 21.579331] hidraw: raw HID events driver (C) Jiri Kosina [ 21.612734] usbcore: registered new interface driver usbhid [ 21.612739] usbhid: USB HID core driver [ 21.754213] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/0003:046D:C018.0001/input/input16 [ 21.754452] hid-generic 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0 [ 22.258596] wlan0: authenticate with 36:31:c4:8e:f4:e5 [ 22.263133] wlan0: send auth to 36:31:c4:8e:f4:e5 (try 1/3) [ 22.267615] wlan0: authenticated [ 22.268042] wlan0: associate with 36:31:c4:8e:f4:e5 (try 1/3) [ 22.287926] wlan0: RX AssocResp from 36:31:c4:8e:f4:e5 (capab=0x431 status=0 aid=1) [ 22.288071] wlan0: associated [ 22.288118] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 22.288173] cfg80211: Calling CRDA for country: DE [ 22.295490] cfg80211: Regulatory domain changed to country: DE [ 22.295500] cfg80211: DFS Master region: ETSI [ 22.295504] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 22.295511] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 22.295518] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 22.295525] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 22.295531] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 22.295536] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 697.004883] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000 [ 817.004675] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000 [ 1417.004472] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000 [ 1537.005136] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000 [ 1973.136923] perf interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 2017.004601] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000 ** Model information not available ** Loaded modules: ctr ccm hid_generic usbhid hid snd_hrtimer snd_seq snd_seq_device binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc arc4 snd_hda_codec_si3054 snd_hda_codec_realtek snd_hda_codec_generic ath5k coretemp ath joydev kvm snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep mac80211 i915 iTCO_wdt iTCO_vendor_support cfg80211 wistron_btns sparse_keymap input_polldev pcmcia snd_pcm snd_timer rfkill pcspkr shpchp lpc_ich drm_kms_helper evdev psmouse serio_raw snd soundcore yenta_socket pcmcia_rsrc pcmcia_core mfd_core drm rng_core ac i2c_i801 battery video button acpi_cpufreq i2c_algo_bit i2c_core processor fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif sr_mod cdrom crct10dif_generic crct10dif_common ata_generic ahci libahci ata_piix sdhci_pci sdhci mmc_core libata scsi_mod ehci_pci sky2 thermal thermal_sys uhci_hcd ehci_hcd usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4200000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1800 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at d4300000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d4280000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at d4540000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d2000000-d3ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d4000000-d40fffff Prefetchable memory behind bridge: 0000000100000000-00000001001fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at d4544000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=32 I/O behind bridge: 00004000-00004fff Memory behind bridge: d4100000-d41fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at 1810 [size=16] Kernel driver in use: ata_piix 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at 18d0 [size=8] Region 1: I/O ports at 18c4 [size=4] Region 2: I/O ports at 18c8 [size=8] Region 3: I/O ports at 18c0 [size=4] Region 4: I/O ports at 18b0 [size=16] Region 5: Memory at d4544400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 18e0 [size=32] 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 12) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 2000 [size=256] [virtual] Expansion ROM at d2020000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 04:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01) Subsystem: Qualcomm Atheros AR5006EG 802.11bg NIC (2.4GHz, PCI Express) [168c:3065] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k 0a:06.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller [1524:1412] (rev 10) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176 Memory window 0: dc000000-dfffffff (prefetchable) Memory window 1: f0000000-f3ffffff I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Capabilities: <access denied> Kernel driver in use: yenta_cardbus 0a:06.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530] (rev 01) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (250ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at d4101000 (32-bit, non-prefetchable) [size=128] Capabilities: <access denied> 0a:06.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (rev 01) (prog-if 01) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 18000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 20 Region 0: Memory at d4101400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 0a:06.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller [1524:0551] (rev 01) Subsystem: Fujitsu Technology Solutions Device [1734:10c1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 18000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 20 Region 0: Memory at d4100000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci ** USB devices: Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 8.0 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 3.16.0-4-686-pae (SMP w/2 CPU cores) Locale: LANG=nl_NL.utf8, LC_CTYPE=nl_NL.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-3.16.0-4-686-pae depends on: ii debconf [debconf-2.0] 1.5.56 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod 18-3 ii linux-base 3.5 Versions of packages linux-image-3.16.0-4-686-pae recommends: pn firmware-linux-free <none> pn irqbalance <none> ii libc6-i686 2.19-18 Versions of packages linux-image-3.16.0-4-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-22 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16.0-4-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.16.0-4-686-pae/prerm/removing-running-kernel-3.16.0-4-686-pae: true linux-image-3.16.0-4-686-pae/postinst/depmod-error-initrd-3.16.0-4-686-pae: false linux-image-3.16.0-4-686-pae/postinst/mips-initrd-3.16.0-4-686-pae:
System information report, generated by Sysinfo: 4-5-2015 17:25:31 http://sourceforge.net/projects/gsysinfo SYSTEM INFORMATION Running Debian Linux, the 8.0 release. GNOME: unknown (unknown) Kernel version: 3.16.0-4-686-pae (#1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24)) GCC: no gcc detected Xorg: 1.16.4 (11 February 2015 01:14:26AM) (11 February 2015 01:14:26AM) Hostname: UU-werklaptop Uptime: 0 days 0 h 31 min CPU INFORMATION GenuineIntel, Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz Number of CPUs: 2 CPU clock currently at 1667.000 MHz with 2048 KB cache Numbering: family(6) model(15) stepping(2) Bogomips: 3325.15 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm tpr_shadow MEMORY INFORMATION Total memory: 1506 MB Total swap: 3071 MB STORAGE INFORMATION HARDWARE INFORMATION MOTHERBOARD Host bridge Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) Subsystem: Fujitsu Technology Solutions Device 10c1 PCI bridge(s) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) ISA bridge Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: Fujitsu Technology Solutions Device 10c1 IDE interface Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Technology Solutions Device 10c1 GRAPHIC CARD VGA controller Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Technology Solutions Device 10c1 SOUND CARD Multimedia controller Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: Fujitsu Technology Solutions Device 10c1 NETWORK Ethernet controller Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Qualcomm Atheros AR5006EG 802.11bg NIC (2.4GHz, PCI Express)