Package: dpt-i2o-raidutils
Version: 0.0.6-20
Severity: important
Control: clone 332229 -1
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
(Apologies for the preceding standard blob. There appears to be a bug in
reportbug itself!)
This bug seems to have first been mentioned in 2007. See
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=332229 (Message #38)
however it was closed prematurely and never cloned.
It has been suggested that this may be related to a BIOS bug, and indeed
this system has some trouble running SMOR, albeit probably unrelated
graphics/EFI issues (requires Alt-A, not Ctl-A on boot -
http://ask.adaptec.com/app/answers/detail/a_id/3297/~/the-display-has-garbled-characters-when-pressing-ctrl%2Ba-to-get-into-smor)
Note that the raid board currently has v1.3R firmware installed, NOT the
latest (v1.62). Updating seems to require a floppy interface that newer
systems don't have anymore. I'm working on it but creating a 'legacy' USB
device that SMOR can recognize is proving troublesome.
surge@animal:~$ lsmod | grep i2o
i2o_proc 34843 0
i2o_config 16931 0
i2o_block 12952 0
i2o_core 35819 3 i2o_proc,i2o_config,i2o_block
---SESSION 1---
root@animal:~# ps -A | grep raideng
root@animal:~# /usr/sbin/raideng /VERBOSE
BuildNodeNameList : 05/11/115-15:04:58 Found Linux I2O Controler, using
/dev/i2octl device file for utility-relative controller number 0.
osdOpenEngine : 05/11/115-15:04:58 Return = 0 - 1 hbas found
osdCreateSemaphore : Rtn = bfc4b0
dpteng Is Ready.
---SESSION 2---
root@animal:~# /usr/sbin/raidutil -L
<hangs>
---SESSION 1 (cont.)---
Engine Calls : 05/11/115-15:05:05 Engine Echo Message
Engine Calls : 05/11/115-15:05:05 DPT_OpenEngine
Engine Calls : 05/11/115-15:05:05 DPT_CallEngine
EngTag = 0, Event = 10, Target = 0
Offset = 421 fromEng_P = 7f5382fd5421 toEng_P = 7f5382fd5000
osdRequestSemaphore : Rtn = 0
osdReleaseSemaphore : Rtn = 0
osdIOrequest : Return = 0
osdRequestSemaphore : Rtn = 0
osdReleaseSemaphore : Rtn = 0
osdConnected : 05/11/115-15:05:05 ioMethod = 1
Engine Calls : 05/11/115-15:05:05 DPT_CallEngine
EngTag = 1, Event = 14, Target = 0
Offset = 421 fromEng_P = 7f5382fd5421 toEng_P = 7f5382fd5000
osdRequestSemaphore : Rtn = 0
osdReleaseSemaphore : Rtn = 0
osdGetCtlrs : 05/11/115-15:05:05 Enter, Return = 2147483648
osdGetCtlrs : 05/11/115-15:05:05 Return = 0
osdSendCCB : 05/11/115-15:05:05 (0,0,7,0) OpCode = c1
ProcessEataToI2o:05/11/115-15:05:05 Enter
_osdStartCp : 05/11/115-15:05:05 Enter, callback = 411740
osdSendMessage : 05/11/115-15:05:05 Enter, Function = ff
osdSendMessage : IoAddress is zero for HbaNum=0
osdSendMessage : 05/11/115-15:05:05 Return = 80000000
_osdStartCp : 05/11/115-15:05:05 Return = ffffffff
_osdStartCp : 05/11/115-15:05:05 Enter, callback = 411740
osdSendMessage : 05/11/115-15:05:05 Enter, Function = ff
osdSendMessage : IoAddress is zero for HbaNum=0
osdSendMessage : 05/11/115-15:05:05 Return = 80000000
_osdStartCp : 05/11/115-15:05:05 Return = ffffffff
_osdStartCp : 05/11/115-15:05:05 Enter, callback = 411740
osdSendMessage : 05/11/115-15:05:05 Enter, Function = ff
osdSendMessage : IoAddress is zero for HbaNum=0
osdSendMessage : 05/11/115-15:05:05 Return = 80000000
_osdStartCp : 05/11/115-15:05:05 Return = ffffffff
_osdStartCp : 05/11/115-15:05:05 Enter, callback = 411740
osdSendMessage : 05/11/115-15:05:05 Enter, Function = ff
osdSendMessage : IoAddress is zero for HbaNum=0
osdSendMessage : 05/11/115-15:05:05 Return = 80000000
_osdStartCp : 05/11/115-15:05:05 Return = ffffffffSegmentation fault
root@animal:~# tail -1 /var/log/syslog
May 11 15:05:05 animal kernel: [31397.204468] traps: raideng[20530] general
protection ip:7f538207769c sp:7fffbb56fc88 error:0 in
libc-2.19.so[7f5381ff2000+19f000]
root@animal:~# cat /proc/i2o/iop0/status
Organization ID : 0x001b
IOP ID : 0xfff
Host Unit ID : 0x0000
Segment Number : 0x000
I2O version : 1.5
IOP State : OPERATIONAL
Messenger Type : Memory mapped
Inbound Frame Size : 512 bytes
Max Inbound Frames : 256
Current Inbound Frames : 256
Max Outbound Frames : 256
Product ID : ADAPTEC 2100S
Expected LCT Size : 3702 bytes
IOP Capabilities
Context Field Size Support : Supports only 32-bit context fields
Current Context Field Size : not configured
Inbound Peer Support : Not supported
Outbound Peer Support : Not supported
Peer to Peer Support : Not supported
Desired private memory size : 0 kB
Allocated private memory size : 0 kB
Private memory base address : 0x00000000
Desired private I/O size : 0 kB
Allocated private I/O size : 0 kB
Private I/O base address : 0x00000000
Relevant entries from `lspci -vvv`:
05:01.0 PCI bridge: Adaptec (formerly DPT) PCI Bridge (rev 02) (prog-if 00 [Nor
mal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 00100000-000fffff
Prefetchable memory behind bridge: 00100000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
05:01.1 I2O: Adaptec (formerly DPT) SmartRAID V Controller (rev 02) (prog-if 01)
Subsystem: Adaptec (formerly DPT) 2000S Ultra3 Single Channel
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 250ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
BIST result: 00
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=32M]
[virtual] Expansion ROM at f7900000 [disabled] [size=32K]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: PCI_I2O
-- System Information:
Debian Release: 8.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.19.0-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages dpt-i2o-raidutils depends on:
ii libc6 2.19-18
ii libgcc1 1:4.9.2-10
ii libstdc++6 4.9.2-10
ii multiarch-support 2.19-18
dpt-i2o-raidutils recommends no packages.
dpt-i2o-raidutils suggests no packages.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
