Package: xserver-xorg-input-synaptics Version: 1.8.2-1 Severity: important Dear Maintainer,
After installing version 1.8.2-1 of the package, the integrated touchpad completely stopped working: the cursor won't move, clicking does not work, neither does two-finger scrolling, etc. The upgrade to xserver-xorg-core 1.17 does not seem to be the culprit here, since 1.8.1-1 works just fine. As you can see in the Xorg startup log below (lines 317-319) the following suspicious lines appears: [ 4.382] (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: touchpad found [ 4.382] (II) config/udev: Adding input device DLL0665:01 06CB:76AD UNKNOWN (/dev/input/mouse1) [ 4.382] (**) DLL0665:01 06CB:76AD UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates" However I can also find them in a previous log running version 1.8.1-1, so I don't think this will help much. Downgrading to 1.8.1-1 fixes the problem. Regards, -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Apr 27 20:33 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2384712 May 5 01:24 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09) /etc/X11/xorg.conf does not exist. Contents of /etc/X11/xorg.conf.d: --------------------------------- total 4 -rw-r--r-- 1 root root 175 Apr 27 22:51 10-hidpi.conf /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): ------------------------------- Linux version 4.0.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-16) ) #1 SMP Debian 4.0.2-1 (2015-05-11) Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 23205 Jun 15 14:13 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 3.842] X.Org X Server 1.17.1 Release Date: 2015-02-10 [ 3.842] X Protocol Version 11, Revision 0 [ 3.842] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 3.842] Current Operating System: Linux xps13 4.0.0-1-amd64 #1 SMP Debian 4.0.2-1 (2015-05-11) x86_64 [ 3.842] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-1-amd64 root=UUID=2695e9e3-e02a-450a-a7ea-efc71825451f ro initrd=/install/initrd.gz quiet [ 3.842] Build Date: 04 May 2015 11:22:06PM [ 3.842] xorg-server 2:1.17.1-2 (http://www.debian.org/support) [ 3.842] Current version of pixman: 0.32.6 [ 3.842] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 3.842] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 3.843] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 15 14:13:27 2015 [ 3.846] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 3.846] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 3.848] (==) No Layout section. Using the first Screen section. [ 3.848] (==) No screen section available. Using defaults. [ 3.848] (**) |-->Screen "Default Screen Section" (0) [ 3.848] (**) | |-->Monitor "<default monitor>" [ 3.848] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 3.848] (==) Automatically adding devices [ 3.848] (==) Automatically enabling devices [ 3.848] (==) Automatically adding GPU devices [ 3.856] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 3.856] Entry deleted from font path. [ 3.857] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 3.857] (==) ModulePath set to "/usr/lib/xorg/modules" [ 3.857] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 3.858] (II) Loader magic: 0x7f4054f05d80 [ 3.858] (II) Module ABI versions: [ 3.858] X.Org ANSI C Emulation: 0.4 [ 3.858] X.Org Video Driver: 19.0 [ 3.858] X.Org XInput driver : 21.0 [ 3.858] X.Org Server Extension : 9.0 [ 3.858] (II) xfree86: Adding drm device (/dev/dri/card0) [ 3.861] (--) PCI:*(0:0:2:0) 8086:1616:1028:0665 rev 9, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64 [ 3.861] (II) LoadModule: "glx" [ 3.862] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 3.877] (II) Module glx: vendor="X.Org Foundation" [ 3.877] compiled for 1.17.1, module version = 1.0.0 [ 3.877] ABI class: X.Org Server Extension, version 9.0 [ 3.877] (==) AIGLX enabled [ 3.877] (==) Matched intel as autoconfigured driver 0 [ 3.877] (==) Matched intel as autoconfigured driver 1 [ 3.877] (==) Matched modesetting as autoconfigured driver 2 [ 3.877] (==) Matched fbdev as autoconfigured driver 3 [ 3.877] (==) Matched vesa as autoconfigured driver 4 [ 3.877] (==) Assigned the driver to the xf86ConfigLayout [ 3.877] (II) LoadModule: "intel" [ 3.878] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 3.884] (II) Module intel: vendor="X.Org Foundation" [ 3.884] compiled for 1.17.1, module version = 2.99.917 [ 3.884] Module class: X.Org Video Driver [ 3.884] ABI class: X.Org Video Driver, version 19.0 [ 3.884] (II) LoadModule: "modesetting" [ 3.884] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 3.885] (II) Module modesetting: vendor="X.Org Foundation" [ 3.885] compiled for 1.17.1, module version = 1.17.1 [ 3.885] Module class: X.Org Video Driver [ 3.885] ABI class: X.Org Video Driver, version 19.0 [ 3.885] (II) LoadModule: "fbdev" [ 3.885] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 3.886] (II) Module fbdev: vendor="X.Org Foundation" [ 3.886] compiled for 1.17.1, module version = 0.4.4 [ 3.886] Module class: X.Org Video Driver [ 3.886] ABI class: X.Org Video Driver, version 19.0 [ 3.886] (II) LoadModule: "vesa" [ 3.886] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 3.890] (II) Module vesa: vendor="X.Org Foundation" [ 3.890] compiled for 1.17.1, module version = 2.3.3 [ 3.890] Module class: X.Org Video Driver [ 3.890] ABI class: X.Org Video Driver, version 19.0 [ 3.890] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 3.890] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 3.890] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 3.890] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 3.890] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 3.890] (II) FBDEV: driver for framebuffer: fbdev [ 3.890] (II) VESA: driver for VESA chipsets: vesa [ 3.890] (++) using VT number 7 [ 3.910] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150130 [ 3.910] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-1 (Vincent Cheng <vch...@debian.org>) [ 3.911] (WW) Falling back to old probe method for modesetting [ 3.913] (WW) Falling back to old probe method for fbdev [ 3.913] (II) Loading sub module "fbdevhw" [ 3.913] (II) LoadModule: "fbdevhw" [ 3.913] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 3.914] (II) Module fbdevhw: vendor="X.Org Foundation" [ 3.914] compiled for 1.17.1, module version = 0.0.2 [ 3.914] ABI class: X.Org Video Driver, version 19.0 [ 3.914] (WW) Falling back to old probe method for vesa [ 3.914] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD graphics 5500 [ 3.914] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2 [ 3.914] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 3.914] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 3.914] (==) intel(0): RGB weight 888 [ 3.914] (==) intel(0): Default visual is TrueColor [ 3.915] (II) intel(0): Output eDP1 has no monitor section [ 3.915] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1 [ 3.915] (II) intel(0): Enabled output eDP1 [ 3.915] (II) intel(0): Output DP1 has no monitor section [ 3.915] (II) intel(0): Enabled output DP1 [ 3.915] (II) intel(0): Output HDMI1 has no monitor section [ 3.915] (II) intel(0): Enabled output HDMI1 [ 3.915] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 3.915] (II) intel(0): Output VIRTUAL1 has no monitor section [ 3.915] (II) intel(0): Enabled output VIRTUAL1 [ 3.915] (--) intel(0): Output eDP1 using initial mode 3200x1800 on pipe 0 [ 3.915] (==) intel(0): TearFree disabled [ 3.915] (==) intel(0): DPI set to (96, 96) [ 3.915] (II) Loading sub module "dri2" [ 3.915] (II) LoadModule: "dri2" [ 3.915] (II) Module "dri2" already built-in [ 3.915] (II) Loading sub module "present" [ 3.915] (II) LoadModule: "present" [ 3.915] (II) Module "present" already built-in [ 3.915] (II) UnloadModule: "modesetting" [ 3.915] (II) Unloading modesetting [ 3.915] (II) UnloadModule: "fbdev" [ 3.915] (II) Unloading fbdev [ 3.915] (II) UnloadSubModule: "fbdevhw" [ 3.915] (II) Unloading fbdevhw [ 3.915] (II) UnloadModule: "vesa" [ 3.915] (II) Unloading vesa [ 3.915] (==) Depth 24 pixmap format is 32 bpp [ 3.917] (II) intel(0): SNA initialized with Broadwell backend [ 3.917] (==) intel(0): Backing store enabled [ 3.917] (==) intel(0): Silken mouse enabled [ 3.918] (II) intel(0): HW Cursor enabled [ 3.918] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 3.918] (==) intel(0): DPMS enabled [ 3.918] (==) intel(0): display hotplug detection enabled [ 3.918] (II) intel(0): [DRI2] Setup complete [ 3.918] (II) intel(0): [DRI2] DRI driver: i965 [ 3.918] (II) intel(0): [DRI2] VDPAU driver: i965 [ 3.918] (II) intel(0): direct rendering: DRI2 enabled [ 3.918] (II) intel(0): hardware support for Present enabled [ 3.918] (--) RandR disabled [ 3.925] (II) SELinux: Disabled on system [ 3.980] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 3.980] (II) AIGLX: enabled GLX_ARB_create_context [ 3.980] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 3.980] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 3.980] (II) AIGLX: enabled GLX_INTEL_swap_event [ 3.980] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 3.980] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 3.980] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 3.980] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 3.980] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 3.980] (II) AIGLX: Loaded and initialized i965 [ 3.980] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 3.989] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 3.999] (II) intel(0): Setting screen physical size to 846 x 476 [ 4.227] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 4.227] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 4.227] (II) LoadModule: "evdev" [ 4.227] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 4.230] (II) Module evdev: vendor="X.Org Foundation" [ 4.230] compiled for 1.16.4, module version = 2.9.2 [ 4.230] Module class: X.Org XInput Driver [ 4.230] ABI class: X.Org XInput driver, version 21.0 [ 4.230] (II) Using input driver 'evdev' for 'Power Button' [ 4.230] (**) Power Button: always reports core events [ 4.230] (**) evdev: Power Button: Device: "/dev/input/event4" [ 4.231] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 4.231] (--) evdev: Power Button: Found keys [ 4.231] (II) evdev: Power Button: Configuring as keyboard [ 4.231] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4" [ 4.231] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 4.231] (**) Option "xkb_rules" "evdev" [ 4.231] (**) Option "xkb_model" "pc105" [ 4.231] (**) Option "xkb_layout" "us" [ 4.231] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 4.231] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 4.231] (II) Using input driver 'evdev' for 'Video Bus' [ 4.231] (**) Video Bus: always reports core events [ 4.231] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 4.231] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 4.231] (--) evdev: Video Bus: Found keys [ 4.231] (II) evdev: Video Bus: Configuring as keyboard [ 4.231] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5" [ 4.231] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 4.231] (**) Option "xkb_rules" "evdev" [ 4.231] (**) Option "xkb_model" "pc105" [ 4.231] (**) Option "xkb_layout" "us" [ 4.231] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 4.231] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 4.231] (II) Using input driver 'evdev' for 'Power Button' [ 4.231] (**) Power Button: always reports core events [ 4.232] (**) evdev: Power Button: Device: "/dev/input/event2" [ 4.232] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 4.232] (--) evdev: Power Button: Found keys [ 4.232] (II) evdev: Power Button: Configuring as keyboard [ 4.232] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2" [ 4.232] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 4.232] (**) Option "xkb_rules" "evdev" [ 4.232] (**) Option "xkb_model" "pc105" [ 4.232] (**) Option "xkb_layout" "us" [ 4.232] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 4.232] (II) No input driver specified, ignoring this device. [ 4.232] (II) This device may have been added with another device file. [ 4.232] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 4.232] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 4.232] (II) Using input driver 'evdev' for 'Sleep Button' [ 4.232] (**) Sleep Button: always reports core events [ 4.232] (**) evdev: Sleep Button: Device: "/dev/input/event3" [ 4.232] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 4.233] (--) evdev: Sleep Button: Found keys [ 4.233] (II) evdev: Sleep Button: Configuring as keyboard [ 4.233] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3" [ 4.233] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 4.233] (**) Option "xkb_rules" "evdev" [ 4.233] (**) Option "xkb_model" "pc105" [ 4.233] (**) Option "xkb_layout" "us" [ 4.233] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event8) [ 4.233] (II) No input driver specified, ignoring this device. [ 4.233] (II) This device may have been added with another device file. [ 4.234] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event9) [ 4.234] (II) No input driver specified, ignoring this device. [ 4.234] (II) This device may have been added with another device file. [ 4.234] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event10) [ 4.234] (II) No input driver specified, ignoring this device. [ 4.234] (II) This device may have been added with another device file. [ 4.234] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event6) [ 4.234] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall" [ 4.234] (II) Using input driver 'evdev' for 'ELAN Touchscreen' [ 4.235] (**) ELAN Touchscreen: always reports core events [ 4.235] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event6" [ 4.288] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x20d0 [ 4.288] (--) evdev: ELAN Touchscreen: Found absolute axes [ 4.288] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes [ 4.288] (II) evdev: ELAN Touchscreen: No buttons found, faking one. [ 4.288] (--) evdev: ELAN Touchscreen: Found x and y absolute axes [ 4.288] (--) evdev: ELAN Touchscreen: Found absolute touchscreen [ 4.288] (II) evdev: ELAN Touchscreen: Configuring as touchscreen [ 4.288] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5 [ 4.288] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 4.288] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:04F3:20D0.0001/input/input7/event6" [ 4.288] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10) [ 4.288] (II) evdev: ELAN Touchscreen: initialized for absolute axes. [ 4.288] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1 [ 4.288] (**) ELAN Touchscreen: (accel) acceleration profile 0 [ 4.288] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000 [ 4.288] (**) ELAN Touchscreen: (accel) acceleration threshold: 4 [ 4.288] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse0) [ 4.288] (II) No input driver specified, ignoring this device. [ 4.288] (II) This device may have been added with another device file. [ 4.289] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event15) [ 4.289] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall" [ 4.289] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD' [ 4.289] (**) Integrated_Webcam_HD: always reports core events [ 4.289] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event15" [ 4.289] (--) evdev: Integrated_Webcam_HD: Vendor 0xc45 Product 0x670c [ 4.289] (--) evdev: Integrated_Webcam_HD: Found keys [ 4.289] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard [ 4.289] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input19/event15" [ 4.289] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11) [ 4.289] (**) Option "xkb_rules" "evdev" [ 4.289] (**) Option "xkb_model" "pc105" [ 4.289] (**) Option "xkb_layout" "us" [ 4.289] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11) [ 4.289] (II) No input driver specified, ignoring this device. [ 4.289] (II) This device may have been added with another device file. [ 4.290] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12) [ 4.290] (II) No input driver specified, ignoring this device. [ 4.290] (II) This device may have been added with another device file. [ 4.290] (II) config/udev: Adding input device DLL0665:01 06CB:76AD UNKNOWN (/dev/input/event13) [ 4.290] (**) DLL0665:01 06CB:76AD UNKNOWN: Applying InputClass "evdev touchpad catchall" [ 4.290] (**) DLL0665:01 06CB:76AD UNKNOWN: Applying InputClass "touchpad catchall" [ 4.290] (**) DLL0665:01 06CB:76AD UNKNOWN: Applying InputClass "Default clickpad buttons" [ 4.290] (II) LoadModule: "synaptics" [ 4.290] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.291] (II) Module synaptics: vendor="X.Org Foundation" [ 4.291] compiled for 1.16.4, module version = 1.8.2 [ 4.291] Module class: X.Org XInput Driver [ 4.291] ABI class: X.Org XInput driver, version 21.0 [ 4.291] (II) Using input driver 'synaptics' for 'DLL0665:01 06CB:76AD UNKNOWN' [ 4.291] (**) DLL0665:01 06CB:76AD UNKNOWN: always reports core events [ 4.291] (**) Option "Device" "/dev/input/event13" [ 4.342] (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: x-axis range 0 - 1216 (res 12) [ 4.342] (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: y-axis range 0 - 680 (res 12) [ 4.342] (II) synaptics: DLL0665:01 06CB:76AD UNKNOWN: device does not report pressure, will use touch data. [ 4.342] (II) synaptics: DLL0665:01 06CB:76AD UNKNOWN: device does not report finger width. [ 4.342] (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: buttons: left double triple [ 4.342] (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: Vendor 0x6cb Product 0x76ad [ 4.342] (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: invalid pressure range. defaulting to 0 - 255 [ 4.342] (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: invalid finger width range. defaulting to 0 - 15 [ 4.342] (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: touchpad found [ 4.342] (**) DLL0665:01 06CB:76AD UNKNOWN: always reports core events [ 4.381] (**) Option "config_info" "udev:/sys/devices/pci0000:00/INT3433:00/i2c-9/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input16/event13" [ 4.381] (II) XINPUT: Adding extended input device "DLL0665:01 06CB:76AD UNKNOWN" (type: TOUCHPAD, id 12) [ 4.381] (**) synaptics: DLL0665:01 06CB:76AD UNKNOWN: (accel) MinSpeed is now constant deceleration 2.5 [ 4.381] (**) synaptics: DLL0665:01 06CB:76AD UNKNOWN: (accel) MaxSpeed is now 1.75 [ 4.381] (**) synaptics: DLL0665:01 06CB:76AD UNKNOWN: (accel) AccelFactor is now 0.144 [ 4.381] (**) DLL0665:01 06CB:76AD UNKNOWN: (accel) keeping acceleration scheme 1 [ 4.381] (**) DLL0665:01 06CB:76AD UNKNOWN: (accel) acceleration profile 1 [ 4.381] (**) DLL0665:01 06CB:76AD UNKNOWN: (accel) acceleration factor: 2.000 [ 4.381] (**) DLL0665:01 06CB:76AD UNKNOWN: (accel) acceleration threshold: 4 [ 4.382] (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: touchpad found [ 4.382] (II) config/udev: Adding input device DLL0665:01 06CB:76AD UNKNOWN (/dev/input/mouse1) [ 4.382] (**) DLL0665:01 06CB:76AD UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates" [ 4.382] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 4.382] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 4.382] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 4.382] (**) AT Translated Set 2 keyboard: always reports core events [ 4.382] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 4.383] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 4.383] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 4.383] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 4.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 4.383] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13) [ 4.383] (**) Option "xkb_rules" "evdev" [ 4.383] (**) Option "xkb_model" "pc105" [ 4.383] (**) Option "xkb_layout" "us" [ 4.383] (II) config/udev: Adding input device PC Speaker (/dev/input/event7) [ 4.383] (II) No input driver specified, ignoring this device. [ 4.383] (II) This device may have been added with another device file. [ 4.383] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event14) [ 4.383] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 4.383] (II) Using input driver 'evdev' for 'Dell WMI hotkeys' [ 4.383] (**) Dell WMI hotkeys: always reports core events [ 4.383] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event14" [ 4.383] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0 [ 4.383] (--) evdev: Dell WMI hotkeys: Found keys [ 4.383] (II) evdev: Dell WMI hotkeys: Configuring as keyboard [ 4.383] (**) Option "config_info" "udev:/sys/devices/virtual/input/input18/event14" [ 4.383] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14) [ 4.383] (**) Option "xkb_rules" "evdev" [ 4.383] (**) Option "xkb_model" "pc105" [ 4.383] (**) Option "xkb_layout" "us" [ 8.033] (II) intel(0): EDID vendor "SHP", prod id 5153 [ 8.033] (II) intel(0): Printing DDC gathered Modelines: [ 8.033] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP) udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=646460 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4 N: input/event4 E: BACKSPACE=guess E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=2546926 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b00000000 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=753191 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5 N: input/event5 E: BACKSPACE=guess E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=2547961 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0C_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=646252 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2 N: input/event2 E: BACKSPACE=guess E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=2547592 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 E: EV=21 E: ID_FOR_SEAT=input-acpi-PNP0C0D_00 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E: SUBSYSTEM=input E: SW=1 E: TAGS=:seat: E: USEC_INITIALIZED=638260 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1 N: input/event1 E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=2546437 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0E_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: KEY=4000 0 0 E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: NAME="Sleep Button" E: PHYS="PNP0C0E/button/input0" E: PRODUCT=19/0/3/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=646318 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=2540565 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input11 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input11 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_03_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel HDMI HDMI/DP,pcm=3" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=2546105 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input11/event8 N: input/event8 E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input11/event8 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: USEC_INITIALIZED=2581689 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input12 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input12 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_03_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel HDMI HDMI/DP,pcm=7" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=2546478 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input12/event9 N: input/event9 E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input12/event9 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: USEC_INITIALIZED=2576650 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input13 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input13 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_03_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel HDMI HDMI/DP,pcm=8" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=2548148 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input13/event10 N: input/event10 E: DEVNAME=/dev/input/event10 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input13/event10 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MAJOR=13 E: MINOR=74 E: SUBSYSTEM=input E: USEC_INITIALIZED=2580668 P: /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:04F3:20D0.0001/input/input7 E: ABS=3273800000000003 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:04F3:20D0.0001/input/input7 E: EV=b E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_4_1_0 E: ID_INPUT=1 E: ID_INPUT_TOUCHSCREEN=1 E: ID_MODEL=Touchscreen E: ID_MODEL_ENC=Touchscreen E: ID_MODEL_ID=20d0 E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0 E: ID_REVISION=1111 E: ID_SERIAL=ELAN_Touchscreen E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=ELAN E: ID_VENDOR_ENC=ELAN E: ID_VENDOR_ID=04f3 E: KEY=400 0 0 0 0 0 E: MODALIAS=input:b0003v04F3p20D0e0110-e0,1,3,k14A,ra0,1,2F,30,31,34,35,36,39,3C,3D,mlsfw E: NAME="ELAN Touchscreen" E: PHYS="usb-0000:00:14.0-4/input0" E: PRODUCT=3/4f3/20d0/110 E: PROP=2 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=2519410 P: /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:04F3:20D0.0001/input/input7/event6 N: input/event6 S: input/by-id/usb-ELAN_Touchscreen-event-if00 S: input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event E: DEVLINKS=/dev/input/by-id/usb-ELAN_Touchscreen-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:04F3:20D0.0001/input/input7/event6 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_HEIGHT_MM=170 E: ID_INPUT_TOUCHSCREEN=1 E: ID_INPUT_WIDTH_MM=305 E: ID_MODEL=Touchscreen E: ID_MODEL_ENC=Touchscreen E: ID_MODEL_ID=20d0 E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0 E: ID_REVISION=1111 E: ID_SERIAL=ELAN_Touchscreen E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=ELAN E: ID_VENDOR_ENC=ELAN E: ID_VENDOR_ID=04f3 E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: USEC_INITIALIZED=2612758 P: /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:04F3:20D0.0001/input/input7/mouse0 N: input/mouse0 E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:04F3:20D0.0001/input/input7/mouse0 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_TOUCHSCREEN=1 E: ID_MODEL=Touchscreen E: ID_MODEL_ENC=Touchscreen E: ID_MODEL_ID=20d0 E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0 E: ID_REVISION=1111 E: ID_SERIAL=ELAN_Touchscreen E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=ELAN E: ID_VENDOR_ENC=ELAN E: ID_VENDOR_ID=04f3 E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: USEC_INITIALIZED=2530688 P: /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input19 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input19 E: EV=3 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_5_1_0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=Integrated_Webcam_HD E: ID_MODEL_ENC=Integrated_Webcam_HD E: ID_MODEL_ID=670c E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0 E: ID_REVISION=4725 E: ID_SERIAL=CN09GTFM72487526B1NVA00_Integrated_Webcam_HD E: ID_TYPE=video E: ID_USB_DRIVER=uvcvideo E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=CN09GTFM72487526B1NVA00 E: ID_VENDOR_ENC=CN09GTFM72487526B1NVA00 E: ID_VENDOR_ID=0c45 E: KEY=100000 0 0 0 E: MODALIAS=input:b0003v0C45p670Ce4725-e0,1,kD4,ramlsfw E: NAME="Integrated_Webcam_HD" E: PHYS="usb-0000:00:14.0-5/button" E: PRODUCT=3/c45/670c/4725 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=2746195 P: /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input19/event15 N: input/event15 S: input/by-id/usb-CN09GTFM72487526B1NVA00_Integrated_Webcam_HD-event-if00 S: input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-id/usb-CN09GTFM72487526B1NVA00_Integrated_Webcam_HD-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event E: DEVNAME=/dev/input/event15 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input19/event15 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=Integrated_Webcam_HD E: ID_MODEL_ENC=Integrated_Webcam_HD E: ID_MODEL_ID=670c E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0 E: ID_REVISION=4725 E: ID_SERIAL=CN09GTFM72487526B1NVA00_Integrated_Webcam_HD E: ID_TYPE=video E: ID_USB_DRIVER=uvcvideo E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=CN09GTFM72487526B1NVA00 E: ID_VENDOR_ENC=CN09GTFM72487526B1NVA00 E: ID_VENDOR_ID=0c45 E: MAJOR=13 E: MINOR=79 E: SUBSYSTEM=input E: USEC_INITIALIZED=2788898 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14 E: EV=40001 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0001v10ECp0288e0001-e0,12,kramls1,2,fw E: NAME="HDA Digital PCBeep" E: PHYS="card1/codec#0/beep0" E: PRODUCT=1/10ec/288/1 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=2549294 P: /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14/event11 N: input/event11 E: DEVNAME=/dev/input/event11 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14/event11 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=75 E: SUBSYSTEM=input E: USEC_INITIALIZED=2581237 P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input15 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: NAME="HDA Intel PCH Headphone" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=4 E: TAGS=:seat: E: USEC_INITIALIZED=2549446 P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input15/event12 N: input/event12 E: DEVNAME=/dev/input/event12 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input15/event12 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=76 E: SUBSYSTEM=input E: USEC_INITIALIZED=2577047 P: /devices/pci0000:00/INT3433:00/i2c-9/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input16 E: ABS=260800000000003 E: DEVPATH=/devices/pci0000:00/INT3433:00/i2c-9/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input16 E: EV=b E: ID_FOR_SEAT=input-platform-INT3433_00 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-INT3433:00 E: ID_PATH_TAG=platform-INT3433_00 E: ID_SERIAL=noserial E: KEY=6420 10000 0 0 0 0 E: MODALIAS=input:b0018v06CBp76ADe0100-e0,1,3,k110,145,14A,14D,14E,ra0,1,2F,35,36,39,mlsfw E: NAME="DLL0665:01 06CB:76AD UNKNOWN" E: PHYS="" E: PRODUCT=18/6cb/76ad/100 E: PROP=1 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=2549724 P: /devices/pci0000:00/INT3433:00/i2c-9/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input16/event13 N: input/event13 S: input/by-path/platform-INT3433:00-event-mouse E: DEVLINKS=/dev/input/by-path/platform-INT3433:00-event-mouse E: DEVNAME=/dev/input/event13 E: DEVPATH=/devices/pci0000:00/INT3433:00/i2c-9/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input16/event13 E: ID_INPUT=1 E: ID_INPUT_HEIGHT_MM=56 E: ID_INPUT_TOUCHPAD=1 E: ID_INPUT_WIDTH_MM=101 E: ID_PATH=platform-INT3433:00 E: ID_PATH_TAG=platform-INT3433_00 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=77 E: SUBSYSTEM=input E: USEC_INITIALIZED=2569087 P: /devices/pci0000:00/INT3433:00/i2c-9/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input16/mouse1 N: input/mouse1 S: input/by-path/platform-INT3433:00-mouse E: DEVLINKS=/dev/input/by-path/platform-INT3433:00-mouse E: DEVNAME=/dev/input/mouse1 E: DEVPATH=/devices/pci0000:00/INT3433:00/i2c-9/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input16/mouse1 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-INT3433:00 E: ID_PATH_TAG=platform-INT3433_00 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=33 E: SUBSYSTEM=input E: USEC_INITIALIZED=2550688 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_FOR_SEAT=input-platform-i8042-serio-0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=1100f02902000 8380307cf910f001 feffffdfffefffff fffffffffffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8D,8E,8F,94,98,9B,9C,9D,9E,9F,A2,A3,A4,A5,A6,AC,AD,B7,B8,B9,BF,CD,D4,D7,D9,E0,E1,E2,E3,EC,F0,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=638474 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEYBOARD_KEY_81=playpause E: KEYBOARD_KEY_82=stopcd E: KEYBOARD_KEY_83=previoussong E: KEYBOARD_KEY_84=nextsong E: KEYBOARD_KEY_85=brightnessdown E: KEYBOARD_KEY_86=brightnessup E: KEYBOARD_KEY_87=battery E: KEYBOARD_KEY_88=unknown E: KEYBOARD_KEY_89=ejectclosecd E: KEYBOARD_KEY_8F=switchvideomode E: KEYBOARD_KEY_8a=suspend E: KEYBOARD_KEY_8b=switchvideomode E: KEYBOARD_KEY_8c=!unknown E: KEYBOARD_KEY_90=previoussong E: KEYBOARD_KEY_91=prog1 E: KEYBOARD_KEY_92=media E: KEYBOARD_KEY_93=unknown E: KEYBOARD_KEY_95=camera E: KEYBOARD_KEY_97=email E: KEYBOARD_KEY_98=f21 E: KEYBOARD_KEY_99=nextsong E: KEYBOARD_KEY_9a=setup E: KEYBOARD_KEY_9b=switchvideomode E: KEYBOARD_KEY_9e=f21 E: KEYBOARD_KEY_a2=playpause E: KEYBOARD_KEY_a4=stopcd E: KEYBOARD_KEY_d8=screenlock E: KEYBOARD_KEY_d9=f21 E: KEYBOARD_KEY_ed=media E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: USEC_INITIALIZED=2548418 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/platform/pcspkr/input/input10 E: DEVPATH=/devices/platform/pcspkr/input/input10 E: EV=40001 E: ID_FOR_SEAT=input-platform-pcspkr E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=2545127 P: /devices/platform/pcspkr/input/input10/event7 N: input/event7 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/platform/pcspkr/input/input10/event7 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: USEC_INITIALIZED=2576671 P: /devices/virtual/input/input18 E: DEVPATH=/devices/virtual/input/input18 E: EV=13 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: KEY=101000b00000400 100000 e000000000000 0 E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k71,72,73,94,CA,E0,E1,E3,F0,F8,ram4,lsfw E: MSC=10 E: NAME="Dell WMI hotkeys" E: PHYS="wmi/input0" E: PRODUCT=19/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=2558871 P: /devices/virtual/input/input18/event14 N: input/event14 E: BACKSPACE=guess E: DEVNAME=/dev/input/event14 E: DEVPATH=/devices/virtual/input/input18/event14 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: MAJOR=13 E: MINOR=78 E: SUBSYSTEM=input E: USEC_INITIALIZED=2585033 E: XKBLAYOUT=us E: XKBMODEL=pc105 DRM Information from dmesg: --------------------------- [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.585838] Linux agpgart interface v0.103 [ 0.629031] [drm] Initialized drm 1.1.0 20060810 [ 0.668127] [drm] Memory usable by graphics device = 4096M [ 0.668132] fb: switching to inteldrmfb from simple [ 0.668270] [drm] Replacing VGA console driver [ 0.668749] [drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead [ 0.690944] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.690946] [drm] Driver supports precise vblank timestamp query. [ 0.750574] fbcon: inteldrmfb (fb0) is primary device [ 0.751826] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0 [ 1.937355] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device -- System Information: Debian Release: stretch/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (101, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.0.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages xserver-xorg-input-synaptics depends on: ii libc6 2.19-18 ii libevdev2 1.4.2+dfsg-1 ii libx11-6 2:1.6.3-1 ii libxi6 2:1.7.4-1+b2 ii libxtst6 2:1.2.2-1+b1 ii xserver-xorg-core [xorg-input-abi-21] 2:1.17.1-2 xserver-xorg-input-synaptics recommends no packages. Versions of packages xserver-xorg-input-synaptics suggests: pn gpointing-device-settings <none> pn touchfreeze <none> -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
