Package: src:linux Version: 3.16.7-ckt11-1 Severity: normal Dear Maintainer,
-- Package-specific info:
** Version: Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24) ** Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/helix-root ro quiet cgroup_enable=memory ** Tainted: CI (3072) * Module from drivers/staging has been loaded. * Working around severe firmware bug. ** Kernel log: [ 5.552781] sound hdaudioC0D0: mono: mono_out=0x0 [ 5.552782] sound hdaudioC0D0: inputs: [ 5.552784] sound hdaudioC0D0: Front Mic=0x19 [ 5.552786] sound hdaudioC0D0: Rear Mic=0x18 [ 5.552788] sound hdaudioC0D0: Line=0x1a [ 5.561583] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input5 [ 5.562315] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 5.562352] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 5.562384] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.562418] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.562450] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.703551] [drm] Initialized drm 1.1.0 20060810 [ 5.803819] ppdev: user-space parallel port driver [ 5.822169] systemd-udevd[433]: renamed network interface eth1 to rename3 [ 5.857870] nouveau [ DEVICE][0000:0f:00.0] BOOT0 : 0x0a8c00b1 [ 5.857874] nouveau [ DEVICE][0000:0f:00.0] Chipset: GT218 (NVA8) [ 5.857876] nouveau [ DEVICE][0000:0f:00.0] Family : NV50 [ 5.857923] nouveau [ VBIOS][0000:0f:00.0] checking PRAMIN for image... [ 5.927265] nouveau [ VBIOS][0000:0f:00.0] ... appears to be valid [ 5.927267] nouveau [ VBIOS][0000:0f:00.0] using image from PRAMIN [ 5.927436] nouveau [ VBIOS][0000:0f:00.0] BIT signature found [ 5.927439] nouveau [ VBIOS][0000:0f:00.0] version 70.18.89.00.02 [ 5.927849] nouveau 0000:0f:00.0: irq 76 for MSI/MSI-X [ 5.927859] nouveau [ PMC][0000:0f:00.0] MSI interrupts enabled [ 5.927890] nouveau [ PFB][0000:0f:00.0] RAM type: DDR3 [ 5.927892] nouveau [ PFB][0000:0f:00.0] RAM size: 512 MiB [ 5.927893] nouveau [ PFB][0000:0f:00.0] ZCOMP: 960 tags [ 5.931440] nouveau [ VOLT][0000:0f:00.0] GPU voltage: 900000uv [ 5.958909] nouveau [ PTHERM][0000:0f:00.0] FAN control: none / external [ 5.958916] nouveau [ PTHERM][0000:0f:00.0] fan management: automatic [ 5.958919] nouveau [ PTHERM][0000:0f:00.0] internal sensor: yes [ 5.958941] nouveau [ CLK][0000:0f:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz [ 5.958945] nouveau [ CLK][0000:0f:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz [ 5.958948] nouveau [ CLK][0000:0f:00.0] 0f: core 520 MHz shader 1230 MHz memory 790 MHz [ 5.958967] nouveau [ CLK][0000:0f:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz [ 5.959235] [TTM] Zone kernel: Available graphics memory: 12360808 kiB [ 5.959237] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 5.959238] [TTM] Initializing pool allocator [ 5.959244] [TTM] Initializing DMA pool allocator [ 5.959254] nouveau [ DRM] VRAM: 512 MiB [ 5.959256] nouveau [ DRM] GART: 1048576 MiB [ 5.959258] nouveau [ DRM] TMDS table version 2.0 [ 5.959260] nouveau [ DRM] DCB version 4.0 [ 5.959262] nouveau [ DRM] DCB outp 00: 02000360 00000000 [ 5.959263] nouveau [ DRM] DCB outp 01: 02000362 00020010 [ 5.959265] nouveau [ DRM] DCB outp 02: 028003a6 0f220010 [ 5.959267] nouveau [ DRM] DCB outp 03: 01011380 00000000 [ 5.959268] nouveau [ DRM] DCB outp 04: 08011382 00020010 [ 5.959270] nouveau [ DRM] DCB outp 05: 088113c6 0f220010 [ 5.959271] nouveau [ DRM] DCB conn 00: 00101064 [ 5.959273] nouveau [ DRM] DCB conn 01: 00202165 [ 5.985148] SSE version of gcm_enc/dec engaged. [ 5.989371] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 6.007495] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.007497] [drm] Driver supports precise vblank timestamp query. [ 6.059339] nouveau [ DRM] MM: using COPY for buffer copies [ 6.059716] systemd-udevd[427]: renamed network interface eth0 to eth1 [ 6.063648] iTCO_vendor_support: vendor-support=0 [ 6.089288] systemd-udevd[433]: renamed network interface eth1 to eth0 [ 6.140078] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 6.140105] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 6.161172] nouveau [ DRM] allocated 1600x900 fb: 0x70000, bo ffff880302534c00 [ 6.161460] fbcon: nouveaufb (fb0) is primary device [ 6.248913] Console: switching to colour frame buffer device 200x56 [ 6.251143] nouveau 0000:0f:00.0: fb0: nouveaufb frame buffer device [ 6.251146] nouveau 0000:0f:00.0: registered panic notifier [ 6.291630] [drm] Initialized nouveau 1.1.2 20120801 for 0000:0f:00.0 on minor 0 [ 6.365416] alg: No test for crc32 (crc32-pclmul) [ 6.370054] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input12 [ 6.370496] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input13 [ 6.371161] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input14 [ 6.371462] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input16 [ 6.663324] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 6.788207] input: HP WMI hotkeys as /devices/virtual/input/input15 [ 8.340228] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 8.472991] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 8.775207] Adding 23437308k swap on /dev/mapper/helix-swap. Priority:-1 extents:1 across:23437308k FS [ 14.240393] loop: module loaded [ 14.464540] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem [ 14.467518] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null) [ 14.521526] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 14.619578] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 14.682409] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 15.143107] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 15.186637] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.291071] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 15.644552] tg3 0000:01:00.0: irq 77 for MSI/MSI-X [ 15.717975] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.001386] tg3 0000:1c:00.0: irq 78 for MSI/MSI-X [ 17.012062] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.294099] tg3 0000:01:00.0 eth0: Link is up at 100 Mbps, full duplex [ 17.294105] tg3 0000:01:00.0 eth0: Flow control is off for TX and off for RX [ 17.294123] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.691277] tg3 0000:1c:00.0 eth1: Link is up at 100 Mbps, full duplex [ 18.691283] tg3 0000:1c:00.0 eth1: Flow control is off for TX and off for RX [ 18.691299] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 28.064750] aufs: module is from the staging directory, the quality is unknown, you have been warned. [ 28.070693] aufs 3.16-20140908 [ 37.429598] Bridge firewalling registered [ 37.431805] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready ** Model information sys_vendor: Hewlett-Packard product_name: HP Z600 Workstation product_version: chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: 786G4 v03.54 board_vendor: Hewlett-Packard board_name: 0B54h board_version: D ** Loaded modules: xt_addrtype ipt_MASQUERADE bridge stp llc aufs(C) xt_REDIRECT iptable_nat nf_nat_ipv4 nf_nat xt_tcpudp xt_mac nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack nf_conntrack iptable_filter ip_tables ip6table_filter ip6_tables x_tables loop intel_powerclamp coretemp kvm_intel kvm crc32_pclmul hp_wmi sparse_keymap ghash_clmulni_intel rfkill iTCO_wdt snd_hda_codec_hdmi iTCO_vendor_support aesni_intel lpc_ich nouveau mxm_wmi video ppdev ttm drm_kms_helper parport_pc aes_x86_64 drm evdev i2c_algo_bit psmouse i2c_core serio_raw mfd_core parport lrw snd_hda_codec_realtek snd_hda_codec_generic gf128mul glue_helper ablk_helper cryptd button snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep wmi shpchp acpi_cpufreq i7core_edac edac_core processor snd_pcm snd_timer snd soundcore thermal_sys ext4 crc16 mbcache jbd2 dm_mod hid_generic usbhid hid sg sd_mod sr_mod crc_t10dif cdrom crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel ahci libahci firewire_ohci libata firewire_core uhci_hcd ehci_pci tg3 xhci_hcd ehci_hcd ptp crc_itu_t pps_core scsi_mod libphy usbcore usb_common floppy ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 13) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fd000000-fd0fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fa000000-fb0fffff Prefetchable memory behind bridge: 00000000f4000000-00000000f9ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=28, subordinate=28, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:10.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 [8086:3425] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:10.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 [8086:3426] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:11.0 PIC [0800]: Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 [8086:3427] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:11.1 PIC [0800]: Intel Corporation 7500/5520/5500 Routing & Protocol Layer Register Port 1 [8086:3428] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: i7core_edac 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:15.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Trusted Execution Technology Registers [8086:342f] (rev 13) (prog-if 20 [IO(X)-APIC]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at d000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at d020 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at d040 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at ee004800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 75 Region 0: Memory at ee000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=1c, subordinate=1c, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: ef000000-ef0fffff Prefetchable memory behind bridge: 00000000ed100000-00000000ed2fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fc000000-fc0fffff Prefetchable memory behind bridge: 00000000ed300000-00000000ed4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at d060 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at d080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at d0a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at ee004c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=37, subordinate=37, sec-latency=32 Memory behind bridge: ed000000-ed0fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA Controller [RAID mode] [8086:2822] Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 74 Region 0: I/O ports at d100 [size=8] Region 1: I/O ports at d110 [size=4] Region 2: I/O ports at d108 [size=8] Region 3: I/O ports at d114 [size=4] Region 4: I/O ports at d0c0 [size=32] Region 5: Memory at ee004000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe [14e4:1684] (rev 10) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 77 Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 03:00.0 USB controller [0c03]: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller [104c:8241] (rev 02) (prog-if 30 [XHCI]) Subsystem: Device [1b5b:8040] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at fd000000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at fd010000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 0f:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [NVS 300] [10de:10d8] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:0862] Physical Slot: 2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 76 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at f4000000 (64-bit, prefetchable) [size=64M] Region 3: Memory at f8000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at e000 [size=128] [virtual] Expansion ROM at fb080000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nouveau 0f:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1) Subsystem: Hewlett-Packard Company Device [103c:0862] Physical Slot: 2 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 34 Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 1c:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe [14e4:1681] (rev 10) Subsystem: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe [14e4:1681] Physical Slot: 3 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 78 Region 0: Memory at ef000000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at ef010000 (64-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at ef020000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: tg3 37:05.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811] (rev 70) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 3e:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers [8086:2c70] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder [8086:2d81] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:2d90] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:2d91] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 0 [8086:2d92] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 1 [8086:2d93] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:2d94] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1 [8086:2d95] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers [8086:2d98] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder [8086:2d99] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers [8086:2d9a] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers [8086:2d9c] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control [8086:2da0] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address [8086:2da1] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank [8086:2da2] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control [8086:2da8] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address [8086:2da9] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank [8086:2daa] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control [8086:2db0] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address [8086:2db1] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank [8086:2db2] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3e:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers [8086:2c70] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder [8086:2d81] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:2d90] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:2d91] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 0 [8086:2d92] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 1 [8086:2d93] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:2d94] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1 [8086:2d95] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers [8086:2d98] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder [8086:2d99] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers [8086:2d9a] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers [8086:2d9c] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control [8086:2da0] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address [8086:2da1] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank [8086:2da2] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control [8086:2da8] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address [8086:2da9] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank [8086:2daa] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control [8086:2db0] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address [8086:2db1] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank [8086:2db2] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:130a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 010 Device 002: ID 046d:c078 Logitech, Inc. Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Since yesterday my main development machine has crashed spontaneously three times. It seems to happen when my Xsession activates the screen lock. It didn't happen while I was interacting with the machine. I was doing something else and get back to the development machine I just see a screen with what looks like a kernel trace. All three times it looked pretty much the same. It does not happen every time the screen lock kicks in though. I've culled the trace from the last occurence from /var/log/messages: Jun 25 16:24:15 helix kernel: [89021.824567] PGD 613417067 PUD 31382a067 PMD 601690067 PTE 0 Jun 25 16:24:15 helix kernel: [89021.824587] Oops: 0002 [#1] SMP Jun 25 16:24:15 helix kernel: [89021.824599] Modules linked in: cfg80211 nfnetlink bluetooth 6lowpan_iphc veth xt_addrtype ipt_MASQUERADE bridge stp llc aufs(C) xt_REDIRECT iptable_nat nf_nat_ipv4 nf_nat xt_tcpudp xt_mac nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack nf_conntrack iptable_filter ip_tables ip6table_filter ip6_tables x_tables loop intel_powerclam p coretemp hp_wmi kvm_intel kvm sparse_keymap rfkill crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 nouveau iTCO_wdt lrw gf128mul glue_helper ppdev iTCO_vendor_support ablk_helper snd_hda_ codec_hdmi mxm_wmi video ttm drm_kms_helper drm psmouse cryptd serio_raw parport_pc evdev lpc_ich mfd_core i2c_algo_bit i2c_core parport wmi snd_hda_codec_realtek snd_hda_codec_generic button snd_h da_intel snd_hda_controller snd_hda_codec acpi_cpufreq i7core_edac edac_core shpchp snd_hwdep processor snd_pcm snd_timer snd soundcore thermal_sys ext4 crc16 mbcache jbd2 dm_mod hid_generic usbhid hid sg sd_mod sr_mod crc_t10dif cdrom crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel ahci libahci libata scsi_mod uhci_hcd ehci_pci tg3 ptp xhci_hcd pps_core firewire_ohci ehci_h cd libphy firewire_core crc_itu_t usbcore usb_common floppy Jun 25 16:24:15 helix kernel: [89021.825012] CPU: 4 PID: 7378 Comm: Xorg Tainted: G CI 3.16.0-4-amd64 #1 Debian 3.16.7-ckt11-1 Jun 25 16:24:15 helix kernel: [89021.825026] Hardware name: Hewlett-Packard HP Z600 Workstation/0B54h, BIOS 786G4 v03.54 11/02/2011 Jun 25 16:24:15 helix kernel: [89021.825038] task: ffff8805c4f4cba0 ti: ffff88059b024000 task.ti: ffff88059b024000 Jun 25 16:24:15 helix kernel: [89021.825049] RIP: 0010:[<ffffffff812be450>] [<ffffffff812be450>] iowrite32+0x30/0x40 Jun 25 16:24:15 helix kernel: [89021.825065] RSP: 0018:ffff88059b027ba0 EFLAGS: 00010292 Jun 25 16:24:15 helix kernel: [89021.825074] RAX: ffff880602261c40 RBX: ffff88059b0666c0 RCX: ffffffffa047ffb0 Jun 25 16:24:15 helix kernel: [89021.825085] RDX: ffffc9000b080000 RSI: ffffc9000b080000 RDI: 0000000000000000 Jun 25 16:24:15 helix kernel: [89021.825096] RBP: 0000000000002004 R08: ffffffffa0556280 R09: 0000000000000000 Jun 25 16:24:15 helix kernel: [89021.825106] R10: 0000000000000000 R11: 000000000000000f R12: 0000000000000000 Jun 25 16:24:15 helix kernel: [89021.825117] R13: ffff88059b027bc8 R14: 0000000000000000 R15: 000000001dec0000 Jun 25 16:24:15 helix kernel: [89021.825129] FS: 00007ffbd736b980(0000) GS:ffff880613c00000(0000) knlGS:0000000000000000 Jun 25 16:24:15 helix kernel: [89021.825141] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 25 16:24:15 helix kernel: [89021.825151] CR2: ffffc9000b080000 CR3: 00000000b8c39000 CR4: 00000000000007e0 Jun 25 16:24:15 helix kernel: [89021.825162] Stack: Jun 25 16:24:15 helix kernel: [89021.825168] ffffffffa047d305 ffffffffa05560f0 ffffffff00000000 0000000003a61170 Jun 25 16:24:15 helix kernel: [89021.825188] ffff880602261c40 0000000000000000 ffff88059b027c40 ffff8800bab52900 Jun 25 16:24:15 helix kernel: [89021.825207] ffff88059b027ce8 ffffffffa0556120 ffff880603765580 ffff880603765580 Jun 25 16:24:15 helix kernel: [89021.825230] Call Trace: Jun 25 16:24:15 helix kernel: [89021.825256] [<ffffffffa047d305>] ? nouveau_gpuobj_create_+0x1d5/0x2e0 [nouveau] Jun 25 16:24:15 helix kernel: [89021.825281] [<ffffffffa047d44a>] ? _nouveau_gpuobj_ctor+0x3a/0x50 [nouveau] Jun 25 16:24:15 helix kernel: [89021.825305] [<ffffffffa047e9fd>] ? nouveau_object_ctor+0x2d/0xd0 [nouveau] Jun 25 16:24:15 helix kernel: [89021.825328] [<ffffffffa047d4aa>] ? nouveau_gpuobj_new+0x4a/0x60 [nouveau] Jun 25 16:24:15 helix kernel: [89021.825360] [<ffffffffa04bcb0f>] ? nouveau_vm_get+0x1af/0x2c0 [nouveau] Jun 25 16:24:15 helix kernel: [89021.825376] [<ffffffff812ab127>] ? idr_mark_full+0x57/0x60 Jun 25 16:24:15 helix kernel: [89021.825407] [<ffffffffa05023e9>] ? nouveau_bo_vma_add+0x29/0x90 [nouveau] Jun 25 16:24:15 helix kernel: [89021.825438] [<ffffffffa0502b3a>] ? nouveau_gem_object_open+0x10a/0x140 [nouveau] Jun 25 16:24:15 helix kernel: [89021.825459] [<ffffffffa04128fa>] ? drm_gem_handle_create_tail+0xba/0x160 [drm] Jun 25 16:24:15 helix kernel: [89021.825490] [<ffffffffa0502ef7>] ? nouveau_gem_ioctl_new+0xc7/0x1d0 [nouveau] Jun 25 16:24:15 helix kernel: [89021.825509] [<ffffffffa04108b7>] ? drm_ioctl+0x1c7/0x5b0 [drm] Jun 25 16:24:15 helix kernel: [89021.825540] [<ffffffffa04fabbe>] ? nouveau_drm_ioctl+0x5e/0x90 [nouveau] Jun 25 16:24:15 helix kernel: [89021.825554] [<ffffffff811ba50f>] ? do_vfs_ioctl+0x2cf/0x4b0 Jun 25 16:24:15 helix kernel: [89021.825566] [<ffffffff811aa5bd>] ? __sb_end_write+0x2d/0x70 Jun 25 16:24:15 helix kernel: [89021.825579] [<ffffffff811a8342>] ? vfs_write+0x172/0x1f0 Jun 25 16:24:15 helix kernel: [89021.825589] [<ffffffff811ba771>] ? SyS_ioctl+0x81/0xa0 Jun 25 16:24:15 helix kernel: [89021.825605] [<ffffffff815135e8>] ? page_fault+0x28/0x30 Jun 25 16:24:15 helix kernel: [89021.825617] [<ffffffff815115cd>] ? system_call_fast_compare_end+0x10/0x15 Jun 25 16:24:15 helix kernel: [89021.825626] Code: 03 00 48 89 f2 77 24 48 81 fe 00 00 01 00 76 0b 0f b7 d6 89 f8 ef c3 0f 1f 40 00 48 c7 c6 fa a4 74 81 48 89 d7 e9 51 fe ff ff 90 <89> 3e c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 ff ff ff Jun 25 16:24:15 helix kernel: [89021.825798] RSP <ffff88059b027ba0> Jun 25 16:24:15 helix kernel: [89021.825805] CR2: ffffc9000b080000 Jun 25 16:24:15 helix kernel: [89021.829351] ---[ end trace 878c1a248fc979b0 ]--- Apart from timestamps, addresses, CPU and PID, all three occurences show the same log. I am not sure about the list of linked in modules as that seems to be in no particular order. The kernel package was last updated on 2015-06-09 05:49:29JST from 3.16.7-ckt9-3 (info courtesy of `etckeeper`) and rebooted the same day on 08:15 (according to `last`). Until yesterday, 2015-06-24, it has been running without any trouble. Not sure if it's relevant but I'm using xserver-xorg-video-nouveau 1:1.0.11-1+b1 since 2015-05-26 08:10:56JST. -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (990, 'testing'), (500, 'testing-updates'), (500, 'stable-updates'), (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores) Locale: LANG=ja_JP.UTF-8, LC_CTYPE=ja_JP.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages linux-image-3.16.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.56 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod 20-1 ii linux-base 3.5 ii module-init-tools 20-1 Versions of packages linux-image-3.16.0-4-amd64 recommends: pn firmware-linux-free <none> pn irqbalance <none> Versions of packages linux-image-3.16.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-26 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64: linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false -- Olaf Meeuwissen, LPIC-2 FLOSS Engineer -- AVASYS CORPORATION FSF Associate Member #1962 Help support software freedom http://www.fsf.org/jf?referrer=1962