Package: eciadsl Version: 0.11-2 Severity: important Eciadsl driver does not load on boot. If I unplug and replug the modem it works:
usb 1-1: USB disconnect, address 3 ohci_hcd 0000:00:02.0: wakeup usb 1-1: new full speed USB device using ohci_hcd and address 4 usb 1-1: usbfs: process 4421 (eciadsl-firmwar) did not claim interface 0 before use usb 1-1: USB disconnect, address 4 ohci_hcd 0000:00:02.0: wakeup usb 1-1: new full speed USB device using ohci_hcd and address 5 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. It works the same if I do rmmod ohci_hcd && modprobe ohci_hcd I remember that it loaded on boot with old hotplug package, so it could be a udev bug as well. I can give further informations if needed. Regards, Giacomo Orlandi -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.14-2-k7 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages eciadsl depends on: ii libc6 2.3.5-8 GNU C Library: Shared libraries an Versions of packages eciadsl recommends: ii ppp 2.4.3-20050321+2 Point-to-Point Protocol (PPP) daem ii udev 0.076-6 /dev/ and hotplug management daemo -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
