Package: linux-image-amd64 Version: 4.2+68 Severity: normal Dear Maintainer,
On most reboots ot startup i get this ATA errors: [ 9.787144] ata6.00: exception Emask 0x0 SAct 0x2200000 SErr 0x0 action 0x6 [ 9.787191] ata6.00: irq_stat 0x40000008 [ 9.787219] ata6.00: failed command: READ FPDMA QUEUED [ 9.787256] ata6.00: cmd 60/20:c8:b8:9e:fd/00:00:0d:00:00/40 tag 25 ncq 16384 in res 41/84:20:b8:9e:fd/00:00:0d:00:00/00 Emask 0x410 (ATA bus error) [ 9.787346] ata6.00: status: { DRDY ERR } [ 9.787372] ata6.00: error: { ICRC ABRT } [ 9.787397] ata6: hard resetting link [ 10.107238] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 10.210212] ata6.00: configured for UDMA/133 [ 10.210227] ata6: EH complete I've found that maybe there is some problem with NCQ. I've disable it with option in grub which just changed error message to something else related to DMA. I've run about 5 times short SMART test and 2 times long SMART test without errors. Despite that test passed i've get SMART error: End-to-End_Error become 1200 while threshold is 99. I've decided that my disk is doing to die so i've backup all my data. Then i've installed windows and run seagate tools which is only available for windows and my hdd passed all test without any errors. I've read on Seagate site that some of this SMART error can't be trusted because they don't have the same meaning for Seagate drive as for other manufactures. I've run all test that Lenovo provide for my laptop and they all passed without error either. I have to mention that iso image of Seagate tools for DOS can't even initialize my HDD and can't make any test. I don't know if this is right place to report this bug but i believe that there is something wrong with ata module for linux. My hdd is Seagate Laptop SSHD ST1000LM014-SSHD-8GB. My hdd often even can't boot with some grub errors and i have to hard reset it several time until it start. When i have only windows and didn't use grub to boot, windows boot every time without any errors. -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.3.0-rc7-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-amd64 depends on: ii linux-image-4.2.0-1-amd64 4.2.6-1 linux-image-amd64 recommends no packages. linux-image-amd64 suggests no packages. -- no debconf information Божан