These error messages are probably harmless. They are probably because
your drive lacks some SMART capabilities. The '-a' which is either listed
in smartd.conf, or assumed by default, is equivalent to saying 'monitor
all smart data'.
Read the smartd.conf man page to see what '-a' is equivalent to. Then
remove -a and list all the capabilities explicitly. Comment them out one
by one until the syslog error messages go away. Or look at the smartctl
-a output from the disk to see what the SMART capabilities of the disk
are.
Cheers,
Bruce
On Fri, 13 Jan 2006, Bastian Venthur wrote:
Subject: smartd causes bad error messages in syslog
Package: smartmontools
Version: 5.32-3
Severity: important
A few days ago I installed smartmontools and launched the smartd in
order to keep track of the health of my drives. Since the day I
installed smartmontools I have the following messages in my syslog:
$ sudo grep hda /var/log/syslog
Jan 13 09:34:11 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 09:34:11 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 09:34:11 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 09:34:11 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:18:14 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:18:14 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:18:14 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:18:14 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:20:08 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:20:08 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:20:09 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:20:09 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:23:28 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:23:28 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:23:28 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:23:28 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:23:36 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:23:36 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:23:37 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:23:37 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:23:45 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:23:45 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:23:45 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:23:45 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:23:55 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:23:55 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:23:55 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:23:55 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:24:21 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:24:21 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:24:21 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:24:21 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:24:29 hades kernel: hda: drive_cmd: status=0x53 { DriveReady
SeekComplete Index Error }
Jan 13 10:24:29 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
Jan 13 10:24:29 hades kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 13 10:24:29 hades kernel: hda: drive_cmd: error=0x04 {
DriveStatusError }
I've googled around and found something similar on the smartmontools ML:
http://sourceforge.net/mailarchive/message.php?msg_id=4424716
From the upstream devels:
Could you please do two things:
(1) see if:
smartctl -a /dev/hda
gives the same error messages
No it does not.
(2) if it does, run
smartctl -a --report ioctl,2 /dev/hda
and send the output to the mailing list. That
way we can see
just what drive command is causing the
problem
(3) smartctl -a does not give the error,
only smartd does, then
stop smartd on your system, run
smartd --debug --report ioctl,2
and post the output to the
mailing list.
Ok here it comes (Please note that I've two drives in this box: hda and
hdb -- only hda seems to cause the messages in syslog):
$ sudo smartd --debug --report ioctl,2
smartd version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Opened configuration file /etc/smartd.conf
Configuration file /etc/smartd.conf parsed.
Device: /dev/hda, opened
REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE
REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE returned 0
===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 5a 04 70 18 00 00 10 00 00 7e 00 02 3f 00 00 00
016-031: 00 00 54 51 35 31 38 33 31 30 37 36 33 37 32 38
032-047: 20 20 20 20 20 20 20 20 03 00 a3 00 04 00 30 41
048-063: 2e 46 39 30 30 30 55 51 4e 41 55 54 20 4d 49 46
064-079: 45 52 41 42 4c 4c 53 20 33 54 32 2e 20 41 20 20
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
096-111: 00 00 00 0f 00 00 00 02 00 02 07 00 70 18 10 00
112-127: 3f 00 00 39 60 00 00 01 00 39 60 00 07 00 07 00
128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 0e 00 00 00 09 00 00 40 00 00 00 00 00 00 00 00
176-191: 07 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====
Device: /dev/hda, not found in smartd database.
REPORT-IOCTL: DeviceFD=3 Command=SMART ENABLE
REPORT-IOCTL: DeviceFD=3 Command=SMART ENABLE returned 0
REPORT-IOCTL: DeviceFD=3 Command=SMART AUTOMATIC ATTRIBUTE SAVE
InputParameter=241
REPORT-IOCTL: DeviceFD=3 Command=SMART AUTOMATIC ATTRIBUTE SAVE returned
0
Device: /dev/hda, enabled SMART Attribute Autosave.
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS CHECK
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS CHECK returned 0
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE VALUES
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE VALUES returned 0
===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 06 00 01 29 00 64 64 00 00 00 00 00 00 00 03 27
016-031: 00 57 57 88 13 00 00 00 00 00 04 32 00 4e 4e a0
032-047: 38 00 00 00 00 00 05 33 00 4b 4b be 00 00 00 00
048-063: 00 00 07 0b 00 64 55 00 00 00 00 00 00 00 09 12
064-079: 00 54 54 9d 29 00 00 00 00 00 0b 13 00 64 5a 00
080-095: 00 00 00 00 00 00 0c 32 00 62 62 46 06 00 00 00
096-111: 00 00 0d 0b 00 64 4d 00 00 00 00 00 00 00 c7 1a
112-127: 00 c8 c8 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 82 01 10 00 01 03
368-383: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50 bd
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE THRESHOLDS
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE THRESHOLDS
returned 0
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) =====
000-015: 06 00 01 14 00 00 00 00 00 00 00 00 00 00 03 14
016-031: 00 00 00 00 00 00 00 00 00 00 04 08 00 00 00 00
032-047: 00 00 00 00 00 00 05 14 00 00 00 00 00 00 00 00
048-063: 00 00 07 17 00 00 00 00 00 00 00 00 00 00 09 01
064-079: 00 00 00 00 00 00 00 00 00 00 0b 14 00 00 00 00
080-095: 00 00 00 00 00 00 0c 08 00 00 00 00 00 00 00 00
096-111: 00 00 0d 17 00 00 00 00 00 00 00 00 00 00 c7 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 63
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) =====
Device: /dev/hda, can't monitor Current Pending Sector count - no
Attribute 197
Device: /dev/hda, can't monitor Offline Uncorrectable Sector count - no
Attribute 198
REPORT-IOCTL: DeviceFD=3 Command=SMART AUTO OFFLINE InputParameter=248
REPORT-IOCTL: DeviceFD=3 Command=SMART AUTO OFFLINE returned 0
Device: /dev/hda, enabled SMART Automatic Offline Testing.
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG InputParameter=6
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG returned -1 errno=5
[Input/output error]
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
===== [SMART READ LOG] DATA END (512 Bytes) =====
Error SMART Error Self-Test Log Read failed: Input/output error
Device: /dev/hda, Read SMART Self Test Log Failed
Device: /dev/hda, no SMART Self-Test log; remove -l selftest Directive
from smartd.conf
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG InputParameter=1
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG returned -1 errno=5
[Input/output error]
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
===== [SMART READ LOG] DATA END (512 Bytes) =====
Error SMART Error Log Read failed: Input/output error
Device: /dev/hda, Read SMART Error Log Failed
Device: /dev/hda, no SMART Error log; remove -l error Directive from
smartd.conf
Device: /dev/hda, is SMART capable. Adding to "monitor" list.
Device: /dev/hdb, opened
REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE
REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE returned 0
===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 7a 42 ff 3f 00 00 10 00 00 e1 58 02 3f 00 10 00
016-031: 00 00 0e 00 44 57 57 2d 41 4d 52 36 35 32 33 36
032-047: 32 33 00 32 00 00 00 00 03 00 00 10 28 00 38 31
048-063: 32 2e 44 30 38 31 44 57 20 43 44 57 30 34 42 30
064-079: 2d 42 30 30 55 41 31 41 20 20 20 20 20 20 20 20
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
096-111: 00 00 00 2f 01 40 80 02 00 00 07 00 ff 3f 10 00
112-127: 3f 00 10 fc fb 00 08 01 70 b5 a8 04 00 00 07 00
128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 3e 00 00 00 6b 34 01 43 00 40 69 34 01 00 00 40
176-191: 3f 04 00 00 00 00 00 00 00 00 00 6b fe 80 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 01 00 00 00 00 00 00 00 00 00 25 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a9 a5
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====
Device: /dev/hdb, found in smartd database.
REPORT-IOCTL: DeviceFD=3 Command=SMART ENABLE
REPORT-IOCTL: DeviceFD=3 Command=SMART ENABLE returned 0
REPORT-IOCTL: DeviceFD=3 Command=SMART AUTOMATIC ATTRIBUTE SAVE
InputParameter=241
REPORT-IOCTL: DeviceFD=3 Command=SMART AUTOMATIC ATTRIBUTE SAVE returned
0
Device: /dev/hdb, enabled SMART Attribute Autosave.
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS CHECK
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS CHECK returned 0
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE VALUES
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE VALUES returned 0
===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 10 00 01 0b 00 c8 c3 00 00 00 00 00 00 00 03 07
016-031: 00 62 61 3c 0f 00 00 00 00 00 04 32 00 60 60 eb
032-047: 11 00 00 00 00 00 05 32 00 c8 c8 00 00 00 00 00
048-063: 00 00 07 0b 00 c8 c8 00 00 00 00 00 00 00 09 32
064-079: 00 51 51 bb 38 00 00 00 00 00 0a 13 00 62 58 05
080-095: 00 00 00 00 00 00 0b 13 00 64 64 00 00 00 00 00
096-111: 00 00 0c 32 00 62 62 49 08 00 00 00 00 00 c4 32
112-127: 00 c8 c8 00 00 00 00 00 00 00 c5 12 00 c8 c8 00
128-143: 00 00 00 00 00 00 c6 12 00 c8 c8 00 00 00 00 00
144-159: 00 00 c7 0a 00 c8 c8 64 81 00 00 00 00 00 c8 09
160-175: 00 c8 c8 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 84 00 f8 07 01 1b
368-383: 03 00 01 00 02 20 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3b
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE THRESHOLDS
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE THRESHOLDS
returned 0
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) =====
000-015: 10 00 01 33 c8 c8 c8 c8 00 00 00 00 00 00 03 15
016-031: 00 00 00 00 00 00 00 00 00 00 04 28 00 00 00 00
032-047: 00 00 00 00 00 00 05 70 00 00 00 00 00 00 00 00
048-063: 00 00 07 33 c8 c8 c8 c8 00 00 00 00 00 00 09 00
064-079: 00 00 00 00 00 00 00 00 00 00 0a 33 00 00 00 00
080-095: 00 00 00 00 00 00 0b 33 00 00 00 00 00 00 00 00
096-111: 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 c4 00
112-127: 00 00 00 00 00 00 00 00 00 00 c5 00 00 00 00 00
128-143: 00 00 00 00 00 00 c6 00 00 00 00 00 00 00 00 00
144-159: 00 00 c7 00 00 00 00 00 00 00 00 00 00 00 c8 33
160-175: c8 c8 c8 c8 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c8
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) =====
REPORT-IOCTL: DeviceFD=3 Command=SMART AUTO OFFLINE InputParameter=248
REPORT-IOCTL: DeviceFD=3 Command=SMART AUTO OFFLINE returned 0
Device: /dev/hdb, enabled SMART Automatic Offline Testing.
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG InputParameter=6
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG returned 0
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 00 02 00 fc 00 00 ff ff ff ff 00 00 00 00 00
016-031: 00 00 00 14 a2 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 4e
===== [SMART READ LOG] DATA END (512 Bytes) =====
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG InputParameter=1
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG returned 0
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 01 00 00 01 d9 03 00 e0 ca 22 ec 00 00 00 00
016-031: 01 4d 27 00 e0 ca 22 ec 00 00 00 00 01 d9 04 00
032-047: e0 ca 22 ec 00 00 00 00 01 4d 28 00 e0 ca 22 ec
048-063: 00 00 00 00 08 c7 8b 21 e0 ca 22 ec 00 00 00 10
064-079: 01 ff ff ff ef 51 c7 8b 21 00 00 00 00 00 84 00
080-095: 00 00 11 ee 00 00 00 00 00 13 b9 02 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 32
===== [SMART READ LOG] DATA END (512 Bytes) =====
Device: /dev/hdb, is SMART capable. Adding to "monitor" list.
Monitoring 2 ATA and 0 SCSI devices
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS CHECK
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS CHECK returned 0
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE VALUES
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE VALUES returned 0
===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 06 00 01 29 00 64 64 00 00 00 00 00 00 00 03 27
016-031: 00 57 57 88 13 00 00 00 00 00 04 32 00 4e 4e a0
032-047: 38 00 00 00 00 00 05 33 00 4b 4b be 00 00 00 00
048-063: 00 00 07 0b 00 64 55 00 00 00 00 00 00 00 09 12
064-079: 00 54 54 9d 29 00 00 00 00 00 0b 13 00 64 5a 00
080-095: 00 00 00 00 00 00 0c 32 00 62 62 46 06 00 00 00
096-111: 00 00 0d 0b 00 64 4d 00 00 00 00 00 00 00 c7 1a
112-127: 00 c8 c8 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 82 01 10 00 01 03
368-383: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50 bd
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS CHECK
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS CHECK returned 0
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE VALUES
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE VALUES returned 0
===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 10 00 01 0b 00 c8 c3 00 00 00 00 00 00 00 03 07
016-031: 00 62 61 3c 0f 00 00 00 00 00 04 32 00 60 60 eb
032-047: 11 00 00 00 00 00 05 32 00 c8 c8 00 00 00 00 00
048-063: 00 00 07 0b 00 c8 c8 00 00 00 00 00 00 00 09 32
064-079: 00 51 51 bb 38 00 00 00 00 00 0a 13 00 62 58 05
080-095: 00 00 00 00 00 00 0b 13 00 64 64 00 00 00 00 00
096-111: 00 00 0c 32 00 62 62 49 08 00 00 00 00 00 c4 32
112-127: 00 c8 c8 00 00 00 00 00 00 00 c5 12 00 c8 c8 00
128-143: 00 00 00 00 00 00 c6 12 00 c8 c8 00 00 00 00 00
144-159: 00 00 c7 0a 00 c8 c8 64 81 00 00 00 00 00 c8 09
160-175: 00 c8 c8 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 84 00 f8 07 01 1b
368-383: 03 00 01 00 02 20 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3b
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG InputParameter=6
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG returned 0
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 00 02 00 fc 00 00 ff ff ff ff 00 00 00 00 00
016-031: 00 00 00 14 a2 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 4e
===== [SMART READ LOG] DATA END (512 Bytes) =====
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG InputParameter=1
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG returned 0
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 01 00 00 01 d9 03 00 e0 ca 22 ec 00 00 00 00
016-031: 01 4d 27 00 e0 ca 22 ec 00 00 00 00 01 d9 04 00
032-047: e0 ca 22 ec 00 00 00 00 01 4d 28 00 e0 ca 22 ec
048-063: 00 00 00 00 08 c7 8b 21 e0 ca 22 ec 00 00 00 10
064-079: 01 ff ff ff ef 51 c7 8b 21 00 00 00 00 00 84 00
080-095: 00 00 11 ee 00 00 00 00 00 13 b9 02 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 32
===== [SMART READ LOG] DATA END (512 Bytes) =====
-- Package-specific info:
Ouput of /usr/share/bug/smartmontools:
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.8.1-router-2004-09-28
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages smartmontools depends on:
ii libc6 2.3.2.ds1-22 GNU C Library: Shared libraries
an
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
