Package: linux-source-2.6.15 Version: 2.6.15-2 Severity: normal Tags: experimental
*** Please type your report below this line *** Created a local binary kernel from the source on this sarge box. Whereas the standard 2.6.8 kernel works fine, 2.6.15 doesn't seem to respect that irq 10 is reserved for a legacy isa card in the BIOS (in this case a wd network card). Adding the boot option pci=routeirq doesn't work (same problem) as can be seen from the dmesg output below. Adding pci=noacpi solves the problem. As can be seen in the dmesg output below, the kernel tries to give irq 10 to the audigy sound card and it fails to initialize properly. -- System Information: Debian Release: 3.1 Architecture: i386 (i686) Kernel: Linux 2.6.15 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages linux-source-2.6.15 depends on: ii binutils 2.15-6 The GNU assembler, linker and bina ii bzip2 1.0.2-7 high-quality block-sorting file co -- no debconf information More details: This machine has 2 sound cards: the on-board card and one SB0090 Audigy. Kmix shows nothing in the input section of the Audigy sound card, even after the irq problem described here is bypassed by using pci=noacpi. The eth0 timeouts seen below are the result of the irq problem. Linux version 2.6.15 () ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 PREEMPT Sun Jan 15 02:43:45 EST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 126960 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.1 present. ACPI: RSDP (v000 DTKACC ) @ 0x000f6da0 ACPI: RSDT (v001 AWARD AWRDACPI 0x30302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 AWARD AWRDACPI 0x30302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 DTKACC AWRDACPI 0x00001000 MSFT 0x0100000a) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000) Built 1 zonelists Kernel command line: root=/dev/hda1 ro hdc=ide-scsi pci=routeirq Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01402000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 451.087 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 511808k/524224k available (1479k kernel code, 11784k reserved, 575k data, 228k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 903.08 BogoMIPS (lpj=1806165) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU serial number disabled. CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 mtrr: v2.0 (20020519) CPU: Intel Pentium III (Katmai) stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0a20) checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 4376k freed NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb270, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 4000-403f claimed by PIIX4 ACPI PCI quirk: region 5000-500f claimed by PIIX4 SMB Boot video device is 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: Power Resource [PFAN] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0a.2[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: disabled. PREFETCH window: disabled. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 4 Cannot allocate resource for EISA slot 5 EISA: Detected 0 cards. NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 5, 131072 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode ACPI wakeup devices: USB0 ACPI: (supports S0 S1 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4376KiB [1 disk] into ram disk... <6>input: AT Translated Set 2 keyboard as /class/input/input0 done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 228k freed ide_setup: hdc=ide-scsi Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NET: Registered protocol family 1 PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST330620A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 < hda5 > EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds Adding 1225688k swap on /dev/hda5. Priority:-1 extents:1 across:1225688k EXT3 FS on hda1, internal journal SCSI subsystem initialized wd.c: Presently autoprobing (not recommended) for a single card. wd.c:v1.10 9/23/94 Donald Becker ([EMAIL PROTECTED]) eth%d: WD80x3 at 0x300, 00 00 C0 07 42 55 WD8013, IRQ 10, shared memory at 0xcc000-0xcffff. Linux agpgart interface v0.101 (c) Dave Jones usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x0000e000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: over-current change on port 1 hub 1-0:1.0: over-current change on port 2 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt for device 0000:00:0a.0 disabled EMU10K1_Audigy: probe of 0000:00:0a.0 failed with error -16 gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xe800, speed 1242kHz ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 128M @ 0xe0000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins <[EMAIL PROTECTED]> ACPI: PCI Interrupt 0000:00:0a.2[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[eb00c000-eb00c7ff] Max Packet=[2048] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0021028557] eth1394: $Rev: 1312 $ Ben Collins <[EMAIL PROTECTED]> eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) Real Time Clock Driver v1.12 input: PC Speaker as /class/input/input1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] hub 1-0:1.0: over-current change on port 1 hub 1-0:1.0: over-current change on port 2 hub 1-0:1.0: over-current change on port 1 input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 mice: PS/2 mouse device common for all mice ts: Compaq touchscreen protocol output Capability LSM initialized NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=277. lp0: using parport0 (interrupt-driven). NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=1033. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=270. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=70. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=233. eth0: no IPv6 routers present NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=267. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=265. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=515. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=263. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=261. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=511. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=259. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=257. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=507. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=254. Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist NFSD: starting 90-second grace period NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=252. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=552. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=299. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=84. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=96. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=96. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=96. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=83. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=94. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=94. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=94. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=91. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=91. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=91. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=88. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=88. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=88. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=54. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=54. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=54. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=51. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=51. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=551. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=298. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=295. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=545. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=291. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=288. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=538. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=281. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=278. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]