Date: Sat, 6 Aug 2016 22:41:55 +0900 [sorry I missed this message at the time (off on expedition, and it doesn't seem like the BTS delivered me a mail)]
> I have again looked into this topic and couldn't find a
> reasonable explanation for now.
Well, I just went back to a clean build chroot and hit this issue
again, so an update...
> I have uploaded a new set of packages today, where several
> internal files concerning pdftexconfig.tex as weell have been
> reworked.
> Can you please do the following:
> * remove /var/lib/texmf/tex/generic/config/pdftexconfig.tex
> * install the new packages
> and then tell me what happens?
It still breaks.
I curently have installed:
(unstable-amd64)wookey@kh:~/packages$ dpkg -l | grep texlive
ii texlive-base 2016.20160819-2 all
TeX Live: Essential programs and files
ii texlive-binaries 2016.20160513.41080-6 amd64
Binaries for TeX Live
ii texlive-latex-base 2016.20160819-2 all
TeX Live: LaTeX fundamental packages
ii texlive-latex-base-doc 2016.20160819-2 all
TeX Live: Documentation files for texlive-latex-base
ii texlive-luatex 2016.20160819-2 all
TeX Live: LuaTeX packages
------------------
(unstable-amd64)wookey@kh:~/packages$ sudo apt-get install tex-common
Reading package lists... Done
Building dependency tree
Reading state information... Done
tex-common is already the newest version (6.05).
tex-common set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 275 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up tex-common (6.05) ...
debconf: unable to initialize frontend: Dialogdebconf: (No usable dialog-like
program is installed, so the dialog based frontend cannot be used. at
/usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Running mktexlsr. This may take some time... done.
Running updmap-sys. This may take some time... done.
Running mktexlsr /var/lib/texmf ... done.
Building format(s) --all.
This may take some time...
fmtutil failed. Output has been stored in
/tmp/fmtutil.vKSJnfzq
Please include this file if you report a bug.
dpkg: error processing package tex-common (--configure):
----------------
-------/tmp/fmtutil.vKSJnfzq----------
fmtutil: fmtutil is using the following fmtutil.cnf files (in precedence order):
fmtutil: /usr/share/texmf/web2c/fmtutil.cnf
fmtutil: /usr/share/texlive/texmf-dist/web2c/fmtutil.cnf
fmtutil: fmtutil is using the following fmtutil.cnf file for writing changes:
fmtutil: /etc/texmf/web2c/fmtutil.cnf
fmtutil [INFO]: writing formats under /var/lib/texmf/web2c
fmtutil [INFO]: --- remaking luatex with luatex
fmtutil: running `luatex -ini -jobname=luatex -progname=luatex luatex.ini' ...
This is LuaTeX, Version 0.95.0 (TeX Live 2016/Debian) (INITEX)
restricted system commands enabled.
(/usr/share/texlive/texmf-dist/tex/plain/config/luatex.ini
(/usr/share/texlive/texmf-dist/tex/generic/config/luatexiniconfig.tex)
(/usr/share/texlive/texmf-dist/tex/generic/config/luatex-unicode-letters.tex
loading Unicode properties)
(/usr/share/texlive/texmf-dist/tex/plain/config/pdfetex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex
! Undefined control sequence.
l.6 \pdfoutput
= 1
?
! Emergency stop.
l.6 \pdfoutput
= 1
! ==> Fatal error occurred, bad output DVI file produced!
No pages of output.
Transcript written on luatex.log.
fmtutil [INFO]: --- remaking pdftex with pdftex
fmtutil: running `pdftex -ini -jobname=pdftex -progname=pdftex
-translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/plain/config/pdfetex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/plain/etex/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation;
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse,
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,)
(/usr/share/texlive/texmf-dist/tex/plain/config/pdftexmagfix.tex) )
Beginning to dump on file pdftex.fmt
(preloaded format=pdftex 2016.10.20)
2895 strings of total length 43166
7960 memory locations dumped; current usage is 203&7321
1263 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on pdftex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/pdftex.fmt installed.
fmtutil [INFO]: --- remaking tex with tex
fmtutil: running `tex -ini -jobname=tex -progname=tex tex.ini' ...
This is TeX, Version 3.14159265 (TeX Live 2016/Debian) (INITEX)
(/usr/share/texlive/texmf-dist/tex/plain/config/tex.ini
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex)) )
Beginning to dump on file tex.fmt
(preloaded format=tex 2016.10.20)
2027 strings of total length 29297
4990 memory locations dumped; current usage is 110&4877
926 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
181 for language 0
No pages of output.
Transcript written on tex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/tex/tex.fmt installed.
fmtutil [INFO]: --- remaking pdflatex with pdftex
fmtutil: running `pdftex -ini -jobname=pdflatex -progname=pdflatex
-translate-file=cp227.tcx *pdflatex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/pdflatex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/latex/base/latex.ltx
(/usr/share/texlive/texmf-dist/tex/latex/base/texsys.cfg)
./texsys.aux found
\@currdir set to: ./.
Assuming \openin and \input
have the same search path.
Defining UNIX/DOS style filename parser.
catcodes, registers, compatibility for TeX 2, parameters,
LaTeX2e <2016/03/31> patch level 3
hacks, control, par, spacing, files, font encodings, lengths,
====================================
Local config file fonttext.cfg used
====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/fonttext.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/fonttext.ltx
=== Don't modify this file, use a .cfg file instead ===
(/usr/share/texlive/texmf-dist/tex/latex/base/omlenc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/t1cmr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmss.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmtt.fd)))
====================================
Local config file fontmath.cfg used
====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/fontmath.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/fontmath.ltx
=== Don't modify this file, use a .cfg file instead ===
(/usr/share/texlive/texmf-dist/tex/latex/base/omlcmm.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/omscmsy.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/omxcmex.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ucmr.fd)))
====================================
Local config file preload.cfg used
=====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/preload.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/preload.ltx)) page nos., x-ref,
environments, center, verbatim, math definitions, boxes, title, sectioning,
contents, floats, footnotes, index, bibliography, output,
===========================================
Local configuration file hyphen.cfg used
===========================================
(/usr/share/texlive/texmf-dist/tex/generic/babel/hyphen.cfg
(/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/dumyhyph.tex)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/zerohyph.tex))
) )
Beginning to dump on file pdflatex.fmt
(preloaded format=pdflatex 2016.10.20)
5055 strings of total length 69035
44382 memory locations dumped; current usage is 144&43790
3400 multiletter control sequences
\font\nullfont=nullfont
\font\OMX/cmex/m/n/10=cmex10
\font\tenln=line10
\font\tenlnw=linew10
\font\tencirc=lcircle10
\font\tencircw=lcirclew10
\font\OT1/cmr/m/n/5=cmr5
\font\OT1/cmr/m/n/7=cmr7
\font\OT1/cmr/m/n/10=cmr10
\font\OML/cmm/m/it/5=cmmi5
\font\OML/cmm/m/it/7=cmmi7
\font\OML/cmm/m/it/10=cmmi10
\font\OMS/cmsy/m/n/5=cmsy5
\font\OMS/cmsy/m/n/7=cmsy7
\font\OMS/cmsy/m/n/10=cmsy10
3633 words of font info for 14 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6081 has 183 ops out of 35111
2 for language 1
181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on pdflatex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/pdflatex.fmt installed.
fmtutil [INFO]: --- remaking mptopdf with pdftex
fmtutil: running `pdftex -ini -jobname=mptopdf -progname=context
-translate-file=cp227.tcx mptopdf.tex' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
(/usr/share/texlive/texmf-dist/tex/generic/context/mptopdf/mptopdf.tex
(/usr/share/texlive/texmf-dist/tex/context/base/syst-tex.mkii
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts,
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
more fonts,
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping scaled \font in plain
skipping scaled \font in plain
skipping scaled \font in plain
skipping \font in plain
skipping \skewchar in plain
skipping \skewchar in plain
skipping \skewchar in plain
skipping \skewchar in plain
skipping \skewchar in plain
skipping \skewchar in plain
skipping \textfont in plain
skipping \scriptfont in plain
skipping \scriptscriptfont in plain
skipping \textfont in plain
skipping \scriptfont in plain
skipping \scriptscriptfont in plain
skipping \textfont in plain
skipping \scriptfont in plain
skipping \scriptscriptfont in plain
skipping \textfont in plain
skipping \scriptfont in plain
skipping \scriptscriptfont in plain
skipping \textfont in plain
skipping \textfont in plain
skipping \textfont in plain
skipping \scriptfont in plain
skipping \scriptscriptfont in plain
skipping \textfont in plain
macros, math definitions,
skipping used \tenex in plain
output routines, hyphenation
skipping \input in plain
skipping \tenrm in plain
)) (/usr/share/texlive/texmf-dist/tex/context/base/supp-mis.mkii
loading : ConTeXt Support Macros / Miscellaneous (2004.10.26)
) (/usr/share/texlive/texmf-dist/tex/context/base/supp-pdf.mkii
loading : ConTeXt Support Macros / PDF
) (/usr/share/texlive/texmf-dist/tex/context/base/supp-mpe.mkii
loading : ConTeXt Support Macros / MPS extensions
) )
Beginning to dump on file mptopdf.fmt
(preloaded format=mptopdf 2016.10.20)
3291 strings of total length 48892
13893 memory locations dumped; current usage is 116&13746
1664 multiletter control sequences
\font\nullfont=nullfont
0 words of font info for 0 preloaded fonts
0 hyphenation exceptions
Hyphenation trie of length 256 has 0 ops out of 35111
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on mptopdf.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/mptopdf.fmt installed.
fmtutil [INFO]: --- remaking dvilualatex with luatex
fmtutil: running `luatex -ini -jobname=dvilualatex -progname=dvilualatex
dvilualatex.ini' ...
This is LuaTeX, Version 0.95.0 (TeX Live 2016/Debian) (INITEX)
restricted system commands enabled.
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/dvilualatex.ini
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/lualatexiniconfig.tex)
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex
! Undefined control sequence.
l.6 \pdfoutput
= 1
?
! Emergency stop.
l.6 \pdfoutput
= 1
! ==> Fatal error occurred, bad output DVI file produced!
No pages of output.
Transcript written on dvilualatex.log.
fmtutil [INFO]: --- remaking etex with pdftex
fmtutil: running `pdftex -ini -jobname=etex -progname=etex
-translate-file=cp227.tcx *etex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/plain/config/etex.ini
(/usr/share/texlive/texmf-dist/tex/plain/etex/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation;
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse,
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,) )
Beginning to dump on file etex.fmt
(preloaded format=etex 2016.10.20)
2885 strings of total length 42768
7960 memory locations dumped; current usage is 203&7290
1261 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on etex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/etex.fmt installed.
fmtutil [INFO]: --- remaking lualatex with luatex
fmtutil: running `luatex -ini -jobname=lualatex -progname=lualatex
lualatex.ini' ...
This is LuaTeX, Version 0.95.0 (TeX Live 2016/Debian) (INITEX)
restricted system commands enabled.
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/lualatex.ini
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/lualatexiniconfig.tex)
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex
! Undefined control sequence.
l.6 \pdfoutput
= 1
?
! Emergency stop.
l.6 \pdfoutput
= 1
! ==> Fatal error occurred, bad output DVI file produced!
No pages of output.
Transcript written on lualatex.log.
fmtutil [INFO]: --- remaking dviluatex with luatex
fmtutil: running `luatex -ini -jobname=dviluatex -progname=dviluatex
dviluatex.ini' ...
This is LuaTeX, Version 0.95.0 (TeX Live 2016/Debian) (INITEX)
restricted system commands enabled.
(/usr/share/texlive/texmf-dist/tex/plain/config/dviluatex.ini
(/usr/share/texlive/texmf-dist/tex/generic/config/luatexiniconfig.tex)
(/usr/share/texlive/texmf-dist/tex/generic/config/luatex-unicode-letters.tex
loading Unicode properties)
(/usr/share/texlive/texmf-dist/tex/plain/config/etex.ini
(/usr/share/texlive/texmf-dist/tex/luatex/hyph-utf8/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation;
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse,
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,)))
Beginning to dump on file dviluatex.fmt
(format=dviluatex 2016.10.20)
3095 strings using 10034 bytes
68807 memory locations dumped; current usage is 155&7700
1732 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
50 preloaded fonts
No pages of output.
Transcript written on dviluatex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/luatex/dviluatex.fmt installed.
fmtutil [INFO]: --- remaking mf with mf-nowin
fmtutil: running `mf-nowin -ini -jobname=mf -progname=mf
-translate-file=cp227.tcx mf.ini' ...
This is METAFONT, Version 2.7182818 (TeX Live 2016/Debian) (INIMF)
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
(/usr/share/texlive/texmf-dist/metafont/config/mf.ini
(/usr/share/texlive/texmf-dist/metafont/base/plain.mf
Preloading the plain base, version 2.71: preliminaries,
basic constants and mathematical macros,
macros for converting from device-independent units to pixels,
macros and tables for various modes of operation,
macros for drawing and filling,
macros for proof labels and rules,
macros for character and font administration,
and a few last-minute items.)
(/usr/share/texlive/texmf-dist/metafont/misc/modes.mf) )
Beginning to dump on file mf.base
(preloaded base=mf 2016.10.20)
2226 strings of total length 30026
11855 memory locations dumped; current usage is 3651&7844
1004 symbolic tokens
Transcript written on mf.log.
fmtutil [INFO]: /var/lib/texmf/web2c/metafont/mf.base installed.
fmtutil [INFO]: --- remaking pdfetex with pdftex
fmtutil: running `pdftex -ini -jobname=pdfetex -progname=pdfetex
-translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/plain/config/pdfetex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/plain/etex/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation;
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse,
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,)
(/usr/share/texlive/texmf-dist/tex/plain/config/pdftexmagfix.tex) )
Beginning to dump on file pdfetex.fmt
(preloaded format=pdfetex 2016.10.20)
2895 strings of total length 43169
7960 memory locations dumped; current usage is 203&7321
1263 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on pdfetex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/pdfetex.fmt installed.
fmtutil [INFO]: --- remaking latex with pdftex
fmtutil: running `pdftex -ini -jobname=latex -progname=latex
-translate-file=cp227.tcx *latex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/latex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/latex/base/latex.ltx
(/usr/share/texlive/texmf-dist/tex/latex/base/texsys.cfg)
./texsys.aux found
\@currdir set to: ./.
Assuming \openin and \input
have the same search path.
Defining UNIX/DOS style filename parser.
catcodes, registers, compatibility for TeX 2, parameters,
LaTeX2e <2016/03/31> patch level 3
hacks, control, par, spacing, files, font encodings, lengths,
====================================
Local config file fonttext.cfg used
====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/fonttext.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/fonttext.ltx
=== Don't modify this file, use a .cfg file instead ===
(/usr/share/texlive/texmf-dist/tex/latex/base/omlenc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/t1cmr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmss.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmtt.fd)))
====================================
Local config file fontmath.cfg used
====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/fontmath.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/fontmath.ltx
=== Don't modify this file, use a .cfg file instead ===
(/usr/share/texlive/texmf-dist/tex/latex/base/omlcmm.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/omscmsy.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/omxcmex.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ucmr.fd)))
====================================
Local config file preload.cfg used
=====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/preload.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/preload.ltx)) page nos., x-ref,
environments, center, verbatim, math definitions, boxes, title, sectioning,
contents, floats, footnotes, index, bibliography, output,
===========================================
Local configuration file hyphen.cfg used
===========================================
(/usr/share/texlive/texmf-dist/tex/generic/babel/hyphen.cfg
(/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/dumyhyph.tex)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/zerohyph.tex))
) )
Beginning to dump on file latex.fmt
(preloaded format=latex 2016.10.20)
5054 strings of total length 69009
44379 memory locations dumped; current usage is 144&43787
3400 multiletter control sequences
\font\nullfont=nullfont
\font\OMX/cmex/m/n/10=cmex10
\font\tenln=line10
\font\tenlnw=linew10
\font\tencirc=lcircle10
\font\tencircw=lcirclew10
\font\OT1/cmr/m/n/5=cmr5
\font\OT1/cmr/m/n/7=cmr7
\font\OT1/cmr/m/n/10=cmr10
\font\OML/cmm/m/it/5=cmmi5
\font\OML/cmm/m/it/7=cmmi7
\font\OML/cmm/m/it/10=cmmi10
\font\OMS/cmsy/m/n/5=cmsy5
\font\OMS/cmsy/m/n/7=cmsy7
\font\OMS/cmsy/m/n/10=cmsy10
3633 words of font info for 14 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6081 has 183 ops out of 35111
2 for language 1
181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on latex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/latex.fmt installed.
fmtutil [ERROR]: running `luatex -ini -jobname=luatex -progname=luatex
luatex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `luatex -ini -jobname=dvilualatex
-progname=dvilualatex dvilualatex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `luatex -ini -jobname=lualatex -progname=lualatex
lualatex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [INFO]: Disabled formats: 2
fmtutil [INFO]: Successfully rebuilt formats: 9
fmtutil [INFO]: Failed to build: 3 (luatex/luatex luatex/dvilualatex
luatex/lualatex)
fmtutil [INFO]: Total formats: 14
fmtutil [INFO]: exiting with status 3
-------/tmp/fmtutil.vKSJnfzq----------
Doing the other things you mentioned in case they help:
------------
(unstable-amd64)wookey@kh:~/packages$ sudo mktexlsr /var/lib/texmf
mktexlsr: Updating /var/lib/texmf/ls-R...
mktexlsr: Done.
(unstable-amd64)wookey@kh:~/packages$ sudo fmtutil-sys --byfmt luatex
fmtutil: fmtutil is using the following fmtutil.cnf files (in precedence order):
fmtutil: /usr/share/texmf/web2c/fmtutil.cnf
fmtutil: /usr/share/texlive/texmf-dist/web2c/fmtutil.cnf
fmtutil: fmtutil is using the following fmtutil.cnf file for writing changes:
fmtutil: /etc/texmf/web2c/fmtutil.cnf
fmtutil [INFO]: writing formats under /var/lib/texmf/web2c
fmtutil [INFO]: --- remaking luatex with luatex
fmtutil: running `luatex -ini -jobname=luatex -progname=luatex luatex.ini' ...
This is LuaTeX, Version 0.95.0 (TeX Live 2016/Debian) (INITEX)
restricted system commands enabled.
(/usr/share/texlive/texmf-dist/tex/plain/config/luatex.ini
(/usr/share/texlive/texmf-dist/tex/generic/config/luatexiniconfig.tex)
(/usr/share/texlive/texmf-dist/tex/generic/config/luatex-unicode-letters.tex
loading Unicode properties)
(/usr/share/texlive/texmf-dist/tex/plain/config/pdfetex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex
! Undefined control sequence.
l.6 \pdfoutput
= 1
?
! Emergency stop.
l.6 \pdfoutput
= 1
! ==> Fatal error occurred, bad output DVI file produced!
No pages of output.
Transcript written on luatex.log.
fmtutil [ERROR]: running `luatex -ini -jobname=luatex -progname=luatex
luatex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [INFO]: Disabled formats: 2
fmtutil [INFO]: Not selected formats: 11
fmtutil [INFO]: Failed to build: 1 (luatex/luatex)
fmtutil [INFO]: Total formats: 14
fmtutil [INFO]: exiting with status 1
-----------------------
If I comment out the offending line
\pdfoutput = 1
then I just get the same complaint (Undefined control sequence) about the next
one:
\pdfpageheight = 297 true mm
If I coment out every line in the file then I can run
sudo fmtutil-sys --byfmt luatex
successfully, but I still can't install tex-common:
---------------
(unstable-amd64)wookey@kh:~/packages$ sudo apt-get install tex-commonReading
package lists... Done
Building dependency tree
Reading state information... Done
tex-common is already the newest version (6.05).
0 upgraded, 0 newly installed, 0 to remove and 275 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up tex-common (6.05) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based
frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line
76.)
debconf: falling back to frontend: Readline
Running mktexlsr. This may take some time... done.
Running updmap-sys. This may take some time... done.
Running mktexlsr /var/lib/texmf ... done.
Building format(s) --all.
This may take some time...
fmtutil failed. Output has been stored in
/tmp/fmtutil.NhPN3GC8
Please include this file if you report a bug.
dpkg: error processing package tex-common (--configure):
-----------------
----------/tmp/fmtutil.NhPN3GC8---------
fmtutil: fmtutil is using the following fmtutil.cnf files (in precedence order):
fmtutil: /usr/share/texmf/web2c/fmtutil.cnf
fmtutil: /usr/share/texlive/texmf-dist/web2c/fmtutil.cnf
fmtutil: fmtutil is using the following fmtutil.cnf file for writing changes:
fmtutil: /etc/texmf/web2c/fmtutil.cnf
fmtutil [INFO]: writing formats under /var/lib/texmf/web2c
fmtutil [INFO]: --- remaking luatex with luatex
fmtutil: running `luatex -ini -jobname=luatex -progname=luatex luatex.ini' ...
This is LuaTeX, Version 0.95.0 (TeX Live 2016/Debian) (INITEX)
restricted system commands enabled.
(/usr/share/texlive/texmf-dist/tex/plain/config/luatex.ini
(/usr/share/texlive/texmf-dist/tex/generic/config/luatexiniconfig.tex)
(/usr/share/texlive/texmf-dist/tex/generic/config/luatex-unicode-letters.tex
loading Unicode properties)
(/usr/share/texlive/texmf-dist/tex/plain/config/pdfetex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/luatex/hyph-utf8/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation;
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse,
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,)
(/usr/share/texlive/texmf-dist/tex/plain/config/pdftexmagfix.tex)))
Beginning to dump on file luatex.fmt
(format=luatex 2016.10.20)
3105 strings using 10060 bytes
68807 memory locations dumped; current usage is 155&7700
1732 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
50 preloaded fonts
No pages of output.
Transcript written on luatex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/luatex/luatex.fmt installed.
fmtutil [INFO]: --- remaking tex with tex
fmtutil: running `tex -ini -jobname=tex -progname=tex tex.ini' ...
This is TeX, Version 3.14159265 (TeX Live 2016/Debian) (INITEX)
(/usr/share/texlive/texmf-dist/tex/plain/config/tex.ini
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex)) )
Beginning to dump on file tex.fmt
(preloaded format=tex 2016.10.20)
2027 strings of total length 29297
4990 memory locations dumped; current usage is 110&4877
926 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
181 for language 0
No pages of output.
Transcript written on tex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/tex/tex.fmt installed.
fmtutil [INFO]: --- remaking pdftex with pdftex
fmtutil: running `pdftex -ini -jobname=pdftex -progname=pdftex
-translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/plain/config/pdfetex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/plain/etex/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation;
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse,
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,)
(/usr/share/texlive/texmf-dist/tex/plain/config/pdftexmagfix.tex) )
Beginning to dump on file pdftex.fmt
(preloaded format=pdftex 2016.10.20)
2895 strings of total length 43166
7960 memory locations dumped; current usage is 203&7321
1263 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on pdftex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/pdftex.fmt installed.
fmtutil [INFO]: --- remaking pdfetex with pdftex
fmtutil: running `pdftex -ini -jobname=pdfetex -progname=pdfetex
-translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/plain/config/pdfetex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/plain/etex/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation;
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse,
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,)
(/usr/share/texlive/texmf-dist/tex/plain/config/pdftexmagfix.tex) )
Beginning to dump on file pdfetex.fmt
(preloaded format=pdfetex 2016.10.20)
2895 strings of total length 43169
7960 memory locations dumped; current usage is 203&7321
1263 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on pdfetex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/pdfetex.fmt installed.
fmtutil [INFO]: --- remaking dvilualatex with luatex
fmtutil: running `luatex -ini -jobname=dvilualatex -progname=dvilualatex
dvilualatex.ini' ...
This is LuaTeX, Version 0.95.0 (TeX Live 2016/Debian) (INITEX)
restricted system commands enabled.
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/dvilualatex.ini
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/lualatexiniconfig.tex)
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
! Undefined control sequence.
l.10 \pdfoutput
=0
?
! Emergency stop.
l.10 \pdfoutput
=0
! ==> Fatal error occurred, bad output DVI file produced!
No pages of output.
Transcript written on dvilualatex.log.
fmtutil [INFO]: --- remaking pdflatex with pdftex
fmtutil: running `pdftex -ini -jobname=pdflatex -progname=pdflatex
-translate-file=cp227.tcx *pdflatex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/pdflatex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/latex/base/latex.ltx
(/usr/share/texlive/texmf-dist/tex/latex/base/texsys.cfg)
./texsys.aux found
\@currdir set to: ./.
Assuming \openin and \input
have the same search path.
Defining UNIX/DOS style filename parser.
catcodes, registers, compatibility for TeX 2, parameters,
LaTeX2e <2016/03/31> patch level 3
hacks, control, par, spacing, files, font encodings, lengths,
====================================
Local config file fonttext.cfg used
====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/fonttext.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/fonttext.ltx
=== Don't modify this file, use a .cfg file instead ===
(/usr/share/texlive/texmf-dist/tex/latex/base/omlenc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/t1cmr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmss.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmtt.fd)))
====================================
Local config file fontmath.cfg used
====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/fontmath.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/fontmath.ltx
=== Don't modify this file, use a .cfg file instead ===
(/usr/share/texlive/texmf-dist/tex/latex/base/omlcmm.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/omscmsy.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/omxcmex.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ucmr.fd)))
====================================
Local config file preload.cfg used
=====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/preload.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/preload.ltx)) page nos., x-ref,
environments, center, verbatim, math definitions, boxes, title, sectioning,
contents, floats, footnotes, index, bibliography, output,
===========================================
Local configuration file hyphen.cfg used
===========================================
(/usr/share/texlive/texmf-dist/tex/generic/babel/hyphen.cfg
(/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/dumyhyph.tex)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/zerohyph.tex))
) )
Beginning to dump on file pdflatex.fmt
(preloaded format=pdflatex 2016.10.20)
5055 strings of total length 69035
44382 memory locations dumped; current usage is 144&43790
3400 multiletter control sequences
\font\nullfont=nullfont
\font\OMX/cmex/m/n/10=cmex10
\font\tenln=line10
\font\tenlnw=linew10
\font\tencirc=lcircle10
\font\tencircw=lcirclew10
\font\OT1/cmr/m/n/5=cmr5
\font\OT1/cmr/m/n/7=cmr7
\font\OT1/cmr/m/n/10=cmr10
\font\OML/cmm/m/it/5=cmmi5
\font\OML/cmm/m/it/7=cmmi7
\font\OML/cmm/m/it/10=cmmi10
\font\OMS/cmsy/m/n/5=cmsy5
\font\OMS/cmsy/m/n/7=cmsy7
\font\OMS/cmsy/m/n/10=cmsy10
3633 words of font info for 14 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6081 has 183 ops out of 35111
2 for language 1
181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on pdflatex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/pdflatex.fmt installed.
fmtutil [INFO]: --- remaking mptopdf with pdftex
fmtutil: running `pdftex -ini -jobname=mptopdf -progname=context
-translate-file=cp227.tcx mptopdf.tex' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
(/usr/share/texlive/texmf-dist/tex/generic/context/mptopdf/mptopdf.tex
(/usr/share/texlive/texmf-dist/tex/context/base/syst-tex.mkii
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts,
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
more fonts,
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping \font in plain
skipping scaled \font in plain
skipping scaled \font in plain
skipping scaled \font in plain
skipping \font in plain
skipping \skewchar in plain
skipping \skewchar in plain
skipping \skewchar in plain
skipping \skewchar in plain
skipping \skewchar in plain
skipping \skewchar in plain
skipping \textfont in plain
skipping \scriptfont in plain
skipping \scriptscriptfont in plain
skipping \textfont in plain
skipping \scriptfont in plain
skipping \scriptscriptfont in plain
skipping \textfont in plain
skipping \scriptfont in plain
skipping \scriptscriptfont in plain
skipping \textfont in plain
skipping \scriptfont in plain
skipping \scriptscriptfont in plain
skipping \textfont in plain
skipping \textfont in plain
skipping \textfont in plain
skipping \scriptfont in plain
skipping \scriptscriptfont in plain
skipping \textfont in plain
macros, math definitions,
skipping used \tenex in plain
output routines, hyphenation
skipping \input in plain
skipping \tenrm in plain
)) (/usr/share/texlive/texmf-dist/tex/context/base/supp-mis.mkii
loading : ConTeXt Support Macros / Miscellaneous (2004.10.26)
) (/usr/share/texlive/texmf-dist/tex/context/base/supp-pdf.mkii
loading : ConTeXt Support Macros / PDF
) (/usr/share/texlive/texmf-dist/tex/context/base/supp-mpe.mkii
loading : ConTeXt Support Macros / MPS extensions
) )
Beginning to dump on file mptopdf.fmt
(preloaded format=mptopdf 2016.10.20)
3291 strings of total length 48892
13893 memory locations dumped; current usage is 116&13746
1664 multiletter control sequences
\font\nullfont=nullfont
0 words of font info for 0 preloaded fonts
0 hyphenation exceptions
Hyphenation trie of length 256 has 0 ops out of 35111
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on mptopdf.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/mptopdf.fmt installed.
fmtutil [INFO]: --- remaking lualatex with luatex
fmtutil: running `luatex -ini -jobname=lualatex -progname=lualatex
lualatex.ini' ...
This is LuaTeX, Version 0.95.0 (TeX Live 2016/Debian) (INITEX)
restricted system commands enabled.
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/lualatex.ini
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/lualatexiniconfig.tex)
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/latex/base/latex.ltx
(/usr/share/texlive/texmf-dist/tex/latex/base/texsys.cfg)
./texsys.aux found
\@currdir set to: ./.
Assuming \openin and \input
have the same search path.
Defining UNIX/DOS style filename parser.
catcodes, registers, compatibility for TeX 2, parameters,
LaTeX2e <2016/03/31> patch level 3
hacks, control, par, spacing, files, font encodings, lengths,
====================================
Local config file fonttext.cfg used
====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/fonttext.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/fonttext.ltx
=== Don't modify this file, use a .cfg file instead ===
(/usr/share/texlive/texmf-dist/tex/latex/base/omlenc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/t1cmr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmss.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmtt.fd)))
====================================
Local config file fontmath.cfg used
====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/fontmath.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/fontmath.ltx
=== Don't modify this file, use a .cfg file instead ===
(/usr/share/texlive/texmf-dist/tex/latex/base/omlcmm.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/omscmsy.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/omxcmex.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ucmr.fd)))
====================================
Local config file preload.cfg used
=====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/preload.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/preload.ltx)) page nos., x-ref,
environments, center, verbatim, math definitions, boxes, title, sectioning,
contents, floats, footnotes, index, bibliography, output,
! Undefined control sequence.
\newcatcodetable ...ne {"8000}#1\initcatcodetable
\allocationnumber
l.8016 \newcatcodetable\catcodetable@initex
! Missing number, treated as zero.
<to be read again>
\global
l.8017 \newcatcodetable\catcodetable@string
! Undefined control sequence.
\newcatcodetable ...ne {"8000}#1\initcatcodetable
\allocationnumber
l.8017 \newcatcodetable\catcodetable@string
! Missing number, treated as zero.
<to be read again>
\begingroup
l.8018 \begingroup
! Undefined control sequence.
<argument> \catcodetable
\catcodetable@initex \catcode 0=12 \catcode 13=12 \catcode 37=12
l.8042 }
%
! LaTeX Error: Missing \begin{document}.
See the LaTeX manual or LaTeX Companion for explanation.
Type H <return> for immediate help.
...
l.8042 }
%
! Undefined control sequence.
<argument> ...atcode 92=12 \catcode 127=12 \savecatcodetable
\catcodetable@string \endg...
l.8042 }
%
! Undefined control sequence.
\newcatcodetable ...ne {"8000}#1\initcatcodetable
\allocationnumber
l.8043 \newcatcodetable\catcodetable@latex
! Missing number, treated as zero.
<to be read again>
\global
l.8044 \newcatcodetable\catcodetable@atletter
! Undefined control sequence.
\newcatcodetable ...ne {"8000}#1\initcatcodetable
\allocationnumber
l.8044 \newcatcodetable\catcodetable@atletter
! Missing number, treated as zero.
<to be read again>
\begingroup
l.8045 \begingroup
! Undefined control sequence.
<argument> \catcode 64=12 \savecatcodetable
\catcodetable@latex \catcode 64=11 \savecatcod
l.8094 }
! Undefined control sequence.
<argument> ...detable@latex \catcode 64=11 \savecatcodetable
\catcodetable@atletter
l.8094 }
Overfull \hbox (20.0pt too wide) in paragraph at lines 8042--8120
[]^^A
Overfull \vbox (10.0pt too high) has occurred while \output is active
! LaTeX Error: The font size command \normalsize is not defined:
there is probably something wrong with the class file.
See the LaTeX manual or LaTeX Companion for explanation.
Type H <return> for immediate help.
...
l.8120
! Undefined control sequence.
\@thehead ->\@oddhead
l.8120
! Undefined control sequence.
\@thefoot ->\@oddfoot
l.8120
[1]
===========================================
Local configuration file hyphen.cfg used
===========================================
(/usr/share/texlive/texmf-dist/tex/generic/babel/hyphen.cfg
(/usr/share/texlive/texmf-dist/tex/generic/babel/luababel.def)
(/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
)
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/lualatex-patch-kernel.tex)
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/lualatexquotejobname.tex)
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/lualatex-reset-codes.tex)
(/usr/share/texlive/texmf-dist/tex/generic/config/luatex-unicode-letters.tex
loading Unicode properties)
Underfull \vbox (badness 10000) has occurred while \output is active
! LaTeX Error: The font size command \normalsize is not defined:
there is probably something wrong with the class file.
See the LaTeX manual or LaTeX Companion for explanation.
Type H <return> for immediate help.
...
l.34 \dump
?
! Emergency stop.
...
l.34 \dump
446 words of node memory still in use:
3 hlist, 1 vlist, 1 rule, 2 dir, 18 glue, 2 penalty, 3 glyph, 34 glue_spec,
2 temp, 2 if_stack nodes
avail lists: 2:8,3:1,4:2,5:3,6:2,7:44,9:5,10:1
! ==> Fatal error occurred, bad output DVI file produced!
Output written on lualatex.dvi (1 page, 132 bytes).
Transcript written on lualatex.log.
fmtutil [INFO]: --- remaking dviluatex with luatex
fmtutil: running `luatex -ini -jobname=dviluatex -progname=dviluatex
dviluatex.ini' ...
This is LuaTeX, Version 0.95.0 (TeX Live 2016/Debian) (INITEX)
restricted system commands enabled.
(/usr/share/texlive/texmf-dist/tex/plain/config/dviluatex.ini
(/usr/share/texlive/texmf-dist/tex/generic/config/luatexiniconfig.tex)
(/usr/share/texlive/texmf-dist/tex/generic/config/luatex-unicode-letters.tex
loading Unicode properties)
(/usr/share/texlive/texmf-dist/tex/plain/config/etex.ini
(/usr/share/texlive/texmf-dist/tex/luatex/hyph-utf8/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation;
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse,
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,)))
Beginning to dump on file dviluatex.fmt
(format=dviluatex 2016.10.20)
3095 strings using 10034 bytes
68807 memory locations dumped; current usage is 155&7700
1732 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
50 preloaded fonts
No pages of output.
Transcript written on dviluatex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/luatex/dviluatex.fmt installed.
fmtutil [INFO]: --- remaking latex with pdftex
fmtutil: running `pdftex -ini -jobname=latex -progname=latex
-translate-file=cp227.tcx *latex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/latex.ini
(/usr/share/texlive/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/latex/base/latex.ltx
(/usr/share/texlive/texmf-dist/tex/latex/base/texsys.cfg)
./texsys.aux found
\@currdir set to: ./.
Assuming \openin and \input
have the same search path.
Defining UNIX/DOS style filename parser.
catcodes, registers, compatibility for TeX 2, parameters,
LaTeX2e <2016/03/31> patch level 3
hacks, control, par, spacing, files, font encodings, lengths,
====================================
Local config file fonttext.cfg used
====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/fonttext.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/fonttext.ltx
=== Don't modify this file, use a .cfg file instead ===
(/usr/share/texlive/texmf-dist/tex/latex/base/omlenc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.def)
(/usr/share/texlive/texmf-dist/tex/latex/base/t1cmr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmss.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1cmtt.fd)))
====================================
Local config file fontmath.cfg used
====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/fontmath.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/fontmath.ltx
=== Don't modify this file, use a .cfg file instead ===
(/usr/share/texlive/texmf-dist/tex/latex/base/omlcmm.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/omscmsy.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/omxcmex.fd)
(/usr/share/texlive/texmf-dist/tex/latex/base/ucmr.fd)))
====================================
Local config file preload.cfg used
=====================================
(/usr/share/texlive/texmf-dist/tex/latex/base/preload.cfg
(/usr/share/texlive/texmf-dist/tex/latex/base/preload.ltx)) page nos., x-ref,
environments, center, verbatim, math definitions, boxes, title, sectioning,
contents, floats, footnotes, index, bibliography, output,
===========================================
Local configuration file hyphen.cfg used
===========================================
(/usr/share/texlive/texmf-dist/tex/generic/babel/hyphen.cfg
(/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/dumyhyph.tex)
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/zerohyph.tex))
) )
Beginning to dump on file latex.fmt
(preloaded format=latex 2016.10.20)
5054 strings of total length 69009
44379 memory locations dumped; current usage is 144&43787
3400 multiletter control sequences
\font\nullfont=nullfont
\font\OMX/cmex/m/n/10=cmex10
\font\tenln=line10
\font\tenlnw=linew10
\font\tencirc=lcircle10
\font\tencircw=lcirclew10
\font\OT1/cmr/m/n/5=cmr5
\font\OT1/cmr/m/n/7=cmr7
\font\OT1/cmr/m/n/10=cmr10
\font\OML/cmm/m/it/5=cmmi5
\font\OML/cmm/m/it/7=cmmi7
\font\OML/cmm/m/it/10=cmmi10
\font\OMS/cmsy/m/n/5=cmsy5
\font\OMS/cmsy/m/n/7=cmsy7
\font\OMS/cmsy/m/n/10=cmsy10
3633 words of font info for 14 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6081 has 183 ops out of 35111
2 for language 1
181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on latex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/latex.fmt installed.
fmtutil [INFO]: --- remaking mf with mf-nowin
fmtutil: running `mf-nowin -ini -jobname=mf -progname=mf
-translate-file=cp227.tcx mf.ini' ...
This is METAFONT, Version 2.7182818 (TeX Live 2016/Debian) (INIMF)
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
(/usr/share/texlive/texmf-dist/metafont/config/mf.ini
(/usr/share/texlive/texmf-dist/metafont/base/plain.mf
Preloading the plain base, version 2.71: preliminaries,
basic constants and mathematical macros,
macros for converting from device-independent units to pixels,
macros and tables for various modes of operation,
macros for drawing and filling,
macros for proof labels and rules,
macros for character and font administration,
and a few last-minute items.)
(/usr/share/texlive/texmf-dist/metafont/misc/modes.mf) )
Beginning to dump on file mf.base
(preloaded base=mf 2016.10.20)
2226 strings of total length 30026
11855 memory locations dumped; current usage is 3651&7844
1004 symbolic tokens
Transcript written on mf.log.
fmtutil [INFO]: /var/lib/texmf/web2c/metafont/mf.base installed.
fmtutil [INFO]: --- remaking etex with pdftex
fmtutil: running `pdftex -ini -jobname=etex -progname=etex
-translate-file=cp227.tcx *etex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (INITEX)
restricted \write18 enabled.
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/plain/config/etex.ini
(/usr/share/texlive/texmf-dist/tex/plain/etex/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation;
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse,
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,) )
Beginning to dump on file etex.fmt
(preloaded format=etex 2016.10.20)
2885 strings of total length 42768
7960 memory locations dumped; current usage is 203&7290
1261 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on etex.log.
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/etex.fmt installed.
fmtutil [ERROR]: running `luatex -ini -jobname=dvilualatex
-progname=dvilualatex dvilualatex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `luatex -ini -jobname=lualatex -progname=lualatex
lualatex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [INFO]: Disabled formats: 2
fmtutil [INFO]: Successfully rebuilt formats: 10
fmtutil [INFO]: Failed to build: 2 (luatex/dvilualatex luatex/lualatex)
fmtutil [INFO]: Total formats: 14
fmtutil [INFO]: exiting with status 2
----------/tmp/fmtutil.NhPN3GC8---------
Does any of this help work out what's wrong?
Wookey
--
Principal hats: Linaro, Debian, Wookware, ARM
http://wookware.org/
signature.asc
Description: Digital signature
