Package: installation-reports

Boot method: netinst disc
Image version: Dec 2005
Date: 20 Dec, 2005

Machine: Dell Optiplex GX620
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 1G
Partitions:

[EMAIL PROTECTED]:0# df -Tl
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/mapper/vg0-root
          reiserfs    12582524   7886728   4695796  63% /
tmpfs        tmpfs      517536         0    517536   0% /dev/shm
/dev/sda2 reiserfs      979868     51520    928348   6% /boot
/dev/mapper/vg0-home
          reiserfs    31456316   6979492  24476824  23% /home
/dev/mapper/vg0-backup
          reiserfs     1048540   1048540         0 100% /mnt/backup
tmpfs        tmpfs      517536       120    517416   1% /dev
[EMAIL PROTECTED]:0# fdisk -l

Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1           6       48163+  de  Dell Utility
/dev/sda2   *           7         128      979965   83  Linux
/dev/sda3             129         250      979965   82  Linux swap / Solaris
/dev/sda4             251        9726    76115970   8e  Linux LVM
[EMAIL PROTECTED]:0#

Output of lspci and lspci -n:
[EMAIL PROTECTED]:0# lspci
0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller
Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics
Port (rev 02)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 (rev 01)
0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 2 (rev 01)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family)
USB UHCI #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family)
USB UHCI #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family)
USB UHCI #3 (rev 01)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family)
USB UHCI #4 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family)
USB2 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801G
(ICH7 Family) AC'97 Audio Controller (rev 01)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family)
LPC Interface Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7
Family) Serial ATA Storage Controllers cc=IDE (rev 01)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus
Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV370
5B62 [Radeon X600 (PCIE)]
0000:01:00.1 Display controller: ATI Technologies Inc Radeon X600(RV380)
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme
BCM5751 Gigabit Ethernet PCI Express (rev 01)
[EMAIL PROTECTED]:0# lspci -n

0000:00:00.0 0600: 8086:2770 (rev 02)
0000:00:01.0 0604: 8086:2771 (rev 02)
0000:00:1c.0 0604: 8086:27d0 (rev 01)
0000:00:1c.1 0604: 8086:27d2 (rev 01)
0000:00:1d.0 0c03: 8086:27c8 (rev 01)
0000:00:1d.1 0c03: 8086:27c9 (rev 01)
0000:00:1d.2 0c03: 8086:27ca (rev 01)
0000:00:1d.3 0c03: 8086:27cb (rev 01)
0000:00:1d.7 0c03: 8086:27cc (rev 01)
0000:00:1e.0 0604: 8086:244e (rev e1)
0000:00:1e.2 0401: 8086:27de (rev 01)
0000:00:1f.0 0601: 8086:27b8 (rev 01)
0000:00:1f.1 0101: 8086:27df (rev 01)
0000:00:1f.2 0101: 8086:27c0 (rev 01)
0000:00:1f.3 0c05: 8086:27da (rev 01)
0000:01:00.0 0300: 1002:5b62
0000:01:00.1 0380: 1002:5b72
0000:02:00.0 0200: 14e4:1677 (rev 01)
[EMAIL PROTECTED]:0#

--

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

Official sarge (3.1_r0a) failed to detect the sata drive for me.


--
Lester Cheung
http://www.gnub.net

Reply via email to