Package: yaboot Version: 1.3.16-4 Severity: important Dear Maintainer,
Fresh installation of 8.6.0 on a Power Mac G5 (2005) onto the second SATA disk. The installation proceeded without errors, but it was not possible to boot into Linux afterwards. Booting the DVD in rescue mode showed the second disk was partitioned correctly and the bootstrap and root partitions were present. Installation onto the first SATA disk produced a working boot configuration. Mounting the bootstrap partition and correcting ofboot.b with the following diff produces a working boot of the second stage yaboot program on the second SATA disk. 10c10 < : bootyaboot " Loading second stage bootstrap..." .printf 100 ms load-base release-load-area " /ht@0,f2000000/pci@9/k2-sata-root@c/@ffffffffffffffff/@0:2,\\yaboot" $boot ; --- > : bootyaboot " Loading second stage bootstrap..." .printf 100 ms load-base > release-load-area " > /ht@0,f2000000/pci@9/k2-sata-root@c/k2-sata@1/@0:2,\\yaboot" $boot ; -- System Information: Debian Release: 8.6 APT prefers stable APT policy: (500, 'stable') Architecture: powerpc (ppc64) Kernel: Linux 3.16.0-4-powerpc64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages yaboot depends on: ii libc6 2.19-18+deb8u6 Versions of packages yaboot recommends: ii hfsutils 3.2.6-13 ii powerpc-utils 1.1.3-25 yaboot suggests no packages. -- no debconf information