On Mon 19 Dec 2016 at 22:08:49 -0200, Till Kamppeter wrote: > And "lpinfo -v" still does not list it at all? > > Please put CUPS into debug mode via: > > cupsctl --debug-logging > > Then run > > time lpinfo -v > > and post the output here.
root@test:~# time lpinfo -v network ipps network beh network https network ipp network http real 0m0.056s user 0m0.004s sys 0m0.000s > Attach also /var/log/cups/error_log. Done. > Does > > lpinfo -m | grep driverless > > give some output? Can you post that, too? E [20/Dec/2016:10:07:03 +0000] [CGI] File \"/usr/lib/cups/backend/driverless\" has insecure permissions (0100755/uid=1000/gid=1000). Fixed with 'chown root.root /usr/lib/cups/backend/driverless'. 'lpinfo -v' now gives the same consistent output (50/50) as 'driverless'. For good measure I tested with the backends on the client re-enabled too. The CUPS web interface has HP ENVY 4500 series (driverless) (HP ENVY 4500 series) in discovered printers and offers HP ENVY 4500 series. driverless. cups-filters 1.13.1 (en) as the model. system-config-printer puts HP ENVY 4500 (envy4500.local) under "Network Printer and goes on to install a queue with an everywhere PPD after searching for drivers. Cheers, -- Brian.
D [20/Dec/2016:10:07:03 +0000] [Client 177] Server address is "/var/run/cups/cups.sock". D [20/Dec/2016:10:07:03 +0000] [Client 177] Accepted from localhost (Domain) D [20/Dec/2016:10:07:03 +0000] [Client 177] Waiting for request. I [20/Dec/2016:10:07:03 +0000] Expiring subscriptions... D [20/Dec/2016:10:07:03 +0000] cupsdAddCert: Adding certificate for PID 0 D [20/Dec/2016:10:07:03 +0000] Report: clients=1 D [20/Dec/2016:10:07:03 +0000] Report: jobs=0 D [20/Dec/2016:10:07:03 +0000] Report: jobs-active=0 D [20/Dec/2016:10:07:03 +0000] Report: printers=1 D [20/Dec/2016:10:07:03 +0000] Report: stringpool-string-count=3052 D [20/Dec/2016:10:07:03 +0000] Report: stringpool-alloc-bytes=16584 D [20/Dec/2016:10:07:03 +0000] Report: stringpool-total-bytes=60120 D [20/Dec/2016:10:07:03 +0000] [Client 177] POST / HTTP/1.1 D [20/Dec/2016:10:07:03 +0000] cupsdSetBusyState: newbusy="Active clients", busy="Not busy" D [20/Dec/2016:10:07:03 +0000] [Client 177] Read: status=200 D [20/Dec/2016:10:07:03 +0000] [Client 177] No authentication data provided. D [20/Dec/2016:10:07:03 +0000] [Client 177] 2.0 CUPS-Get-Devices 1 D [20/Dec/2016:10:07:03 +0000] CUPS-Get-Devices D [20/Dec/2016:10:07:03 +0000] cupsdIsAuthorized: username="" D [20/Dec/2016:10:07:03 +0000] [Client 177] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost D [20/Dec/2016:10:07:03 +0000] [Client 177] cupsdSendHeader: code=401, type="text/html", auth_type=0 D [20/Dec/2016:10:07:03 +0000] [Client 177] WWW-Authenticate: Basic realm=\"CUPS\", trc=\"y\" D [20/Dec/2016:10:07:03 +0000] [Client 177] HTTP_STATE_WAITING Closing for error 32 (Broken pipe) D [20/Dec/2016:10:07:03 +0000] [Client 177] Closing connection. D [20/Dec/2016:10:07:03 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Active clients" D [20/Dec/2016:10:07:03 +0000] [Client 178] Server address is "/var/run/cups/cups.sock". D [20/Dec/2016:10:07:03 +0000] [Client 178] Accepted from localhost (Domain) D [20/Dec/2016:10:07:03 +0000] [Client 178] Waiting for request. D [20/Dec/2016:10:07:03 +0000] [Client 179] Server address is "/var/run/cups/cups.sock". D [20/Dec/2016:10:07:03 +0000] [Client 179] Accepted from localhost (Domain) D [20/Dec/2016:10:07:03 +0000] [Client 179] Waiting for request. D [20/Dec/2016:10:07:03 +0000] [Client 178] HTTP_STATE_WAITING Closing for error 32 (Broken pipe) D [20/Dec/2016:10:07:03 +0000] [Client 178] Closing connection. D [20/Dec/2016:10:07:03 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Not busy" D [20/Dec/2016:10:07:03 +0000] [Client 180] Server address is "/var/run/cups/cups.sock". D [20/Dec/2016:10:07:03 +0000] [Client 180] Accepted from localhost (Domain) D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for request. D [20/Dec/2016:10:07:03 +0000] [Client 179] HTTP_STATE_WAITING Closing for error 32 (Broken pipe) D [20/Dec/2016:10:07:03 +0000] [Client 179] Closing connection. D [20/Dec/2016:10:07:03 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Not busy" D [20/Dec/2016:10:07:03 +0000] [Client 180] POST / HTTP/1.1 D [20/Dec/2016:10:07:03 +0000] cupsdSetBusyState: newbusy="Active clients", busy="Not busy" D [20/Dec/2016:10:07:03 +0000] [Client 180] Read: status=200 D [20/Dec/2016:10:07:03 +0000] [Client 180] Authorized as root using PeerCred. D [20/Dec/2016:10:07:03 +0000] [Client 180] 2.0 CUPS-Get-Devices 1 D [20/Dec/2016:10:07:03 +0000] CUPS-Get-Devices D [20/Dec/2016:10:07:03 +0000] cupsdIsAuthorized: username="root" D [20/Dec/2016:10:07:03 +0000] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced" D [20/Dec/2016:10:07:03 +0000] [CGI] argv[1] = "1" D [20/Dec/2016:10:07:03 +0000] [CGI] argv[2] = "0" D [20/Dec/2016:10:07:03 +0000] [CGI] argv[3] = "15" D [20/Dec/2016:10:07:03 +0000] [CGI] argv[4] = "7" D [20/Dec/2016:10:07:03 +0000] [CGI] argv[5] = "requested-attributes=all" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[8] = "HOME=/var/spool/cups/tmp" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[10] = "SERVER_ADMIN=root@test" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[11] = "SOFTWARE=CUPS/2.2.2" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[13] = "USER=root" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[15] = "CUPS_SERVER=/var/run/cups/cups.sock" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[17] = "IPP_PORT=631" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[18] = "AUTH_TYPE=PeerCred" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[19] = "LANG=en_GB.UTF8" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[20] = "REDIRECT_STATUS=1" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[22] = "SERVER_NAME=localhost" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[23] = "SERVER_PORT=631" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[24] = "REMOTE_ADDR=localhost" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[25] = "REMOTE_HOST=localhost" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[26] = "SCRIPT_NAME=/" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[28] = "REMOTE_USER=root" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[29] = "SERVER_PROTOCOL=HTTP/1.1" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[30] = "HTTP_USER_AGENT=CUPS/2.2.2 (Linux 4.8.0-1-686-pae; i686) IPP/2.0" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[31] = "REQUEST_METHOD=POST" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[32] = "CONTENT_LENGTH=75" D [20/Dec/2016:10:07:03 +0000] [CGI] envp[33] = "CONTENT_TYPE=application/ipp" D [20/Dec/2016:10:07:03 +0000] cupsdAddCert: Adding certificate for PID 4755 D [20/Dec/2016:10:07:03 +0000] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 4755) I [20/Dec/2016:10:07:03 +0000] [Client 180] Started "/usr/lib/cups/daemon/cups-deviced" (pid=4755, file=15) D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Started backend /usr/lib/cups/backend/gutenprint52+usb (PID 4756) D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 4757) D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 4758) D [20/Dec/2016:10:07:03 +0000] [CGI] Multi-Call Dye-sublimation CUPS Backend version 0.67G D [20/Dec/2016:10:07:03 +0000] [CGI] Copyright 2007-2016 Solomon Peachy D [20/Dec/2016:10:07:03 +0000] [CGI] This free software comes with ABSOLUTELY NO WARRANTY! D [20/Dec/2016:10:07:03 +0000] [CGI] Licensed under the GNU GPL. Run with \'-G\' for more details. D [20/Dec/2016:10:07:03 +0000] [CGI] D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 4759) D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 4761) D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 4762) E [20/Dec/2016:10:07:03 +0000] [CGI] File \"/usr/lib/cups/backend/driverless\" has insecure permissions (0100755/uid=1000/gid=1000). D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Started backend /usr/lib/cups/backend/https (PID 4763) D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 4764) D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 4765) D [20/Dec/2016:10:07:03 +0000] [CGI] Environment variables: D [20/Dec/2016:10:07:03 +0000] [Client 180] CGI data ready to be sent. D [20/Dec/2016:10:07:03 +0000] [CGI] Flushed attributes... D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Found device \"beh\"... D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [Client 180] Script header: Content-Type: application/ipp D [20/Dec/2016:10:07:03 +0000] [Client 180] Script header: D [20/Dec/2016:10:07:03 +0000] [Client 180] Sending status 200 for CGI. D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdSendHeader: code=200, type="(null)", auth_type=0 D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [CGI] DYESUB_DEBUG EXTRA_PID EXTRA_VID EXTRA_TYPE BACKEND SERIAL D [20/Dec/2016:10:07:03 +0000] [CGI] CUPS Usage: D [20/Dec/2016:10:07:03 +0000] [CGI] DEVICE_URI=someuri gutenprint52+usb job user title num-copies options [ filename ] D [20/Dec/2016:10:07:03 +0000] [cups-deviced] PID 4762 (beh) exited with no errors. D [20/Dec/2016:10:07:03 +0000] [CGI] D [20/Dec/2016:10:07:03 +0000] [CGI] Standalone Usage: D [20/Dec/2016:10:07:03 +0000] [CGI] gutenprint52+usb D [20/Dec/2016:10:07:03 +0000] [ -D ] [ -G ] [ -f ] D [20/Dec/2016:10:07:03 +0000] [ backend_specific_args ] D [20/Dec/2016:10:07:03 +0000] [ -d copies ] D [20/Dec/2016:10:07:03 +0000] [ - | infile ] D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=canonselphy\t# Canon SELPHY CP/ES version 0.91 D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=kodak6800\t# Kodak 6800/6850 version 0.57 D [20/Dec/2016:10:07:03 +0000] [ -c filename ] # Get tone curve D [20/Dec/2016:10:07:03 +0000] [ -C filename ] # Set tone curve D [20/Dec/2016:10:07:03 +0000] [ -m ] # Query media D [20/Dec/2016:10:07:03 +0000] [ -s ] # Query status D [20/Dec/2016:10:07:03 +0000] [ -R ] # Reset printer D [20/Dec/2016:10:07:03 +0000] [ -X jobid ] # Cancel Job D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=kodak605\t# Kodak 605 version 0.27 D [20/Dec/2016:10:07:03 +0000] [ -C filename ] # Set tone curve D [20/Dec/2016:10:07:03 +0000] [ -m ] # Query media D [20/Dec/2016:10:07:03 +0000] [ -s ] # Query status D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=kodak1400\t# Kodak 1400/805 version 0.34 D [20/Dec/2016:10:07:03 +0000] [ -C filename ] # Set tone curve D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=shinkos1245\t# Shinko/Sinfonia CHC-S1245 version 0.10WIP D [20/Dec/2016:10:07:03 +0000] [ -m ] # Query media D [20/Dec/2016:10:07:03 +0000] [ -s ] # Query status D [20/Dec/2016:10:07:03 +0000] [ -u ] # Query user string D [20/Dec/2016:10:07:03 +0000] [ -U sometext ] # Set user string D [20/Dec/2016:10:07:03 +0000] [ -R ] # Reset printer D [20/Dec/2016:10:07:03 +0000] [ -X jobid ] # Abort a printjob D [20/Dec/2016:10:07:03 +0000] [ -F ] # Tone curve refers to FINE mode D [20/Dec/2016:10:07:03 +0000] [ -c filename ] # Get user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -C filename ] # Set user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -l filename ] # Get current tone curve D [20/Dec/2016:10:07:03 +0000] [ -L filename ] # Set current tone curve D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=shinkos2145\t# Shinko/Sinfonia CHC-S2145 version 0.48 D [20/Dec/2016:10:07:03 +0000] [ -b 0|1 ] # Disable/Enable control panel D [20/Dec/2016:10:07:03 +0000] [ -c filename ] # Get user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -C filename ] # Set user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -e ] # Query error log D [20/Dec/2016:10:07:03 +0000] [ -f ] # Use fast return mode D [20/Dec/2016:10:07:03 +0000] [ -F ] # Flash Printer LED D [20/Dec/2016:10:07:03 +0000] [ -i ] # Query printer info D [20/Dec/2016:10:07:03 +0000] [ -l filename ] # Get current tone curve D [20/Dec/2016:10:07:03 +0000] [ -L filename ] # Set current tone curve D [20/Dec/2016:10:07:03 +0000] [ -m ] # Query media D [20/Dec/2016:10:07:03 +0000] [ -r ] # Reset user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -R ] # Reset printer to factory defaults D [20/Dec/2016:10:07:03 +0000] [ -s ] # Query status D [20/Dec/2016:10:07:03 +0000] [ -u ] # Query user string D [20/Dec/2016:10:07:03 +0000] [ -U sometext ] # Set user string D [20/Dec/2016:10:07:03 +0000] [ -X jobid ] # Abort a printjob D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=shinkos6145\t# Shinko/Sinfonia CHC-S6145 version 0.21 D [20/Dec/2016:10:07:03 +0000] [ -c filename ] # Get user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -C filename ] # Set user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -e ] # Query error log D [20/Dec/2016:10:07:03 +0000] [ -F ] # Flash Printer LED D [20/Dec/2016:10:07:03 +0000] [ -i ] # Query printer info D [20/Dec/2016:10:07:03 +0000] [ -k num ] # Set sleep time (5-240 minutes) D [20/Dec/2016:10:07:03 +0000] [ -l filename ] # Get current tone curve D [20/Dec/2016:10:07:03 +0000] [ -L filename ] # Set current tone curve D [20/Dec/2016:10:07:03 +0000] [ -m ] # Query media D [20/Dec/2016:10:07:03 +0000] [ -q filename ] # Extract eeprom data D [20/Dec/2016:10:07:03 +0000] [ -Q filename ] # Extract image correction params D [20/Dec/2016:10:07:03 +0000] [ -r ] # Reset user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -R ] # Reset printer to factory defaults D [20/Dec/2016:10:07:03 +0000] [CGI] Flushed attributes... D [20/Dec/2016:10:07:03 +0000] [Client 180] CGI data ready to be sent. D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Found device \"https\"... D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [ -s ] # Query status D [20/Dec/2016:10:07:03 +0000] [ -X jobid ] # Abort a printjob D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=shinkos6245\t# Shinko/Sinfonia CHC-S6245 version 0.07WIP D [20/Dec/2016:10:07:03 +0000] [ -c filename ] # Get user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -C filename ] # Set user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -e ] # Query error log D [20/Dec/2016:10:07:03 +0000] [ -F ] # Flash Printer LED D [20/Dec/2016:10:07:03 +0000] [ -i ] # Query printer info D [20/Dec/2016:10:07:03 +0000] [ -k num ] # Set sleep time (5-240 minutes) D [20/Dec/2016:10:07:03 +0000] [ -l filename ] # Get current tone curve D [20/Dec/2016:10:07:03 +0000] [ -L filename ] # Set current tone curve D [20/Dec/2016:10:07:03 +0000] [ -m ] # Query media D [20/Dec/2016:10:07:03 +0000] [ -r ] # Reset user/NV tone curve D [20/Dec/2016:10:07:03 +0000] [ -R ] # Reset printer to factory defaults D [20/Dec/2016:10:07:03 +0000] [ -s ] # Query status D [20/Dec/2016:10:07:03 +0000] [ -X jobid ] # Abort a printjob D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=sonyupdr150\t# Sony UP-DR150/UP-DR200/UP-CR10 version 0.18 D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=mitsu70x\t# Mitsubishi CP-D70/D707/K60/D80 version 0.51 D [20/Dec/2016:10:07:03 +0000] [ -s ] # Query status D [20/Dec/2016:10:07:03 +0000] [ -f ] # Use fast return mode D [20/Dec/2016:10:07:03 +0000] [ -k num ] # Set standby time (1-60 minutes, 0 disables) D [20/Dec/2016:10:07:03 +0000] [ -X jobid ] # Abort a printjob D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=mitsu9550\t# Mitsubishi CP-9550 family version 0.27 D [20/Dec/2016:10:07:03 +0000] [ -m ] # Query media D [20/Dec/2016:10:07:03 +0000] [ -s ] # Query status D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=dnpds40\t# DNP DS40/DS80/DSRX1/DS620 version 0.89 D [20/Dec/2016:10:07:03 +0000] [ -i ] # Query printer info D [20/Dec/2016:10:07:03 +0000] [ -I ] # Query sensor info D [20/Dec/2016:10:07:03 +0000] [ -k num ] # Set standby time (1-99 minutes, 0 disables) D [20/Dec/2016:10:07:03 +0000] [ -K num ] # Keep Media Status Across Power Cycles (1 on, 0 off) D [20/Dec/2016:10:07:03 +0000] [ -n ] # Query counters D [20/Dec/2016:10:07:03 +0000] [ -N A|B|M ] # Clear counter A/B/M D [20/Dec/2016:10:07:03 +0000] [ -p num ] # Set counter P D [20/Dec/2016:10:07:03 +0000] [ -R ] # Reset printer D [20/Dec/2016:10:07:03 +0000] [ -s ] # Query status D [20/Dec/2016:10:07:03 +0000] [ -x num ] # Set USB iSerialNumber Reporting (1 on, 0 off) D [20/Dec/2016:10:07:03 +0000] [ -X ] # Cancel current print job D [20/Dec/2016:10:07:03 +0000] [CGI] BACKEND=citizencw01\t# Citizen CW-01 version 0.12 D [20/Dec/2016:10:07:03 +0000] [ -i ] # Query printer info D [20/Dec/2016:10:07:03 +0000] [ -s ] # Query status D [20/Dec/2016:10:07:03 +0000] [ -n ] # Query counters D [20/Dec/2016:10:07:03 +0000] [ -N A|B|M ] # Clear counter A/B/M D [20/Dec/2016:10:07:03 +0000] [Client 180] CGI data ready to be sent. D [20/Dec/2016:10:07:03 +0000] [CGI] Flushed attributes... D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Found device \"ipp\"... D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [Client 180] CGI data ready to be sent. D [20/Dec/2016:10:07:03 +0000] [CGI] Flushed attributes... D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Found device \"ipps\"... D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [Client 180] CGI data ready to be sent. D [20/Dec/2016:10:07:03 +0000] [CGI] Flushed attributes... D [20/Dec/2016:10:07:03 +0000] [cups-deviced] Found device \"http\"... D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [cups-deviced] PID 4765 (ipp) exited with no errors. D [20/Dec/2016:10:07:03 +0000] [cups-deviced] PID 4763 (https) exited with no errors. D [20/Dec/2016:10:07:03 +0000] [cups-deviced] PID 4761 (ipps) exited with no errors. D [20/Dec/2016:10:07:03 +0000] [cups-deviced] PID 4764 (serial) exited with no errors. D [20/Dec/2016:10:07:03 +0000] [cups-deviced] PID 4758 (parallel) exited with no errors. D [20/Dec/2016:10:07:03 +0000] [cups-deviced] PID 4759 (http) exited with no errors. D [20/Dec/2016:10:07:03 +0000] [cups-deviced] PID 4757 (implicitclass) exited with no errors. E [20/Dec/2016:10:07:03 +0000] [cups-deviced] PID 4756 (gutenprint52+usb) stopped with status 1! D [20/Dec/2016:10:07:03 +0000] [Client 180] CGI data ready to be sent. D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [Client 180] CGI data ready to be sent. D [20/Dec/2016:10:07:03 +0000] PID 4755 (/usr/lib/cups/daemon/cups-deviced) exited with no errors. D [20/Dec/2016:10:07:03 +0000] [Client 180] con->http=0x80738fa8 D [20/Dec/2016:10:07:03 +0000] [Client 180] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4755, file=15 D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for CGI data. D [20/Dec/2016:10:07:03 +0000] [Client 180] Sending 0-length chunk. D [20/Dec/2016:10:07:03 +0000] [Client 180] Flushing write buffer. D [20/Dec/2016:10:07:03 +0000] [Client 180] New state is HTTP_STATE_WAITING D [20/Dec/2016:10:07:03 +0000] [Client 180] Waiting for request. D [20/Dec/2016:10:07:03 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Active clients" D [20/Dec/2016:10:07:03 +0000] [Client 180] HTTP_STATE_WAITING Closing for error 32 (Broken pipe) D [20/Dec/2016:10:07:03 +0000] [Client 180] Closing connection. D [20/Dec/2016:10:07:03 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Not busy" I [20/Dec/2016:10:07:04 +0000] Expiring subscriptions...