Package: src:linux Version: 4.8.11-1~bpo8+1 Severity: important Dear Maintainer,
I migrated an Apple Xserve 1,1 from Mac OS to Debian. I tried stretch before, which wouldn't boot at all, but jessie did. So tried the jessie-backports kernel (4.8.11) and it turns out that it experiences a kernel panic early in boot. In maybe 1 out of 10 cases it succesfully boots, but mostly it crashes. The kernel shipped with jessie (3.16) is booting fine, 4.8.x does not, so this is a blocker for future upgrades on this hardware. -- Boot log [ 0.000000] Linux version 4.8.0-0.bpo.2-amd64 (debian-ker...@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.8.11-1~bpo8+1 (2016-12-14) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.8.0-0.bpo.2-amd64 root=/dev/mapper/hexa--vg-root ro nomodeset console=tty0 console=ttyS0,115200n8 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000007eaa5fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007eaa6000-0x000000007eaa9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007eaaa000-0x000000007eaaafff] usable [ 0.000000] BIOS-e820: [mem 0x000000007eaab000-0x000000007eab1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007eab2000-0x000000007eab3fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007eab4000-0x000000007eac0fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007eac1000-0x000000007eac1fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007eac2000-0x000000007eac7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007eac8000-0x000000007eacdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007eace000-0x000000007ead6fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ead7000-0x000000007eae1fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007eae2000-0x000000007eae2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007eae3000-0x000000007eae3fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007eae4000-0x000000007eae4fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007eae5000-0x000000007eaf6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007eaf7000-0x000000007eb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007eb10000-0x000000007ebf8fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ebf9000-0x000000007ec00fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ec01000-0x000000007ec09fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ec0a000-0x000000007ec0afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ec0b000-0x000000007ec10fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ec11000-0x000000007ec11fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007ec12000-0x000000007ec12fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ec13000-0x000000007ec15fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007ec16000-0x000000007ec16fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ec17000-0x000000007ec17fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007ec18000-0x000000007ec1afff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ec1b000-0x000000007ec29fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ec2a000-0x000000007ec33fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ec34000-0x000000007ec34fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ec35000-0x000000007ec36fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ec37000-0x000000007ec3bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ec3c000-0x000000007ec3cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ec3d000-0x000000007ec5ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ec60000-0x000000007ece0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ece1000-0x000000007ecfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ed00000-0x000000007ed01fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ed02000-0x000000007ed49fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ed4a000-0x000000007ed4afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ed4b000-0x000000007edbefff] usable [ 0.000000] BIOS-e820: [mem 0x000000007edbf000-0x000000007edc0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007edc1000-0x000000007edd4fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007edd5000-0x000000007edd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007edd6000-0x000000007edd6fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007edd7000-0x000000007ede1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ede2000-0x000000007ee69fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ee6a000-0x000000007ee6afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ee6b000-0x000000007ee71fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ee72000-0x000000007ee72fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ee73000-0x000000007f16ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f170000-0x000000007f171fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007f172000-0x000000007f174fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f175000-0x000000007f175fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f176000-0x000000007f180fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f181000-0x000000007f181fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f182000-0x000000007f186fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f187000-0x000000007f188fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007f189000-0x000000007f18ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f190000-0x000000007f19ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f1a0000-0x000000007f1abfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f1ac000-0x000000007f1b0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f1b1000-0x000000007f1b3fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f1b4000-0x000000007f1b4fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f1b5000-0x000000007f1befff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f1bf000-0x000000007f1bffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f1c0000-0x000000007f219fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f21a000-0x000000007f21afff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007f21b000-0x000000007f22cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f22d000-0x000000007f245fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f246000-0x000000007f246fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f247000-0x000000007f247fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f248000-0x000000007f249fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007f24a000-0x000000007f24dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f24e000-0x000000007f24efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f24f000-0x000000007f24ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f250000-0x000000007f251fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f252000-0x000000007f266fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f267000-0x000000007f267fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007f268000-0x000000007f26bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f26c000-0x000000007f27cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f27d000-0x000000007f27dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f27e000-0x000000007f285fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f286000-0x000000007f288fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007f289000-0x000000007f28efff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f28f000-0x000000007f28ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f290000-0x000000007f6bcfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f6bd000-0x000000007f6bdfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f6be000-0x000000007f6bffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f6c0000-0x000000007f6c4fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007f6c5000-0x000000007f6e9fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f6ea000-0x000000007f6eafff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007f6eb000-0x000000007f6ebfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f6ec000-0x000000007fbb5fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fbb6000-0x000000007fbb6fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007fbb7000-0x000000007fbb9fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fbba000-0x000000007fbbafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007fbbb000-0x000000007fbfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff90000-0x00000000fffbffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v1.10 by Apple [ 0.000000] efi: UGA=0x7ed4a210 ACPI=0x7f181000 ACPI 2.0=0x7f181014 SMBIOS=0x7f1bf000 [ 0.000000] SMBIOS 2.4 present. [ 0.000000] e820: last_pfn = 0x380000 max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x7fc00 max_arch_pfn = 0x400000000 [ 0.000000] RAMDISK: [mem 0x35c7a000-0x36e34fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000007F181014 000024 (v02 APPLE ) [ 0.000000] ACPI: XSDT 0x000000007F1811C0 0000E4 (v01 APPLE Apple00 00000080 01000013) [ 0.000000] ACPI: ECDT 0x000000007EAE4000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: FACP 0x000000007EAD5000 0000F4 (v04 APPLE Apple00 00000080 Loki 0000005F) [ 0.000000] ACPI: DSDT 0x000000007EAC2000 005C26 (v01 APPLE Apple00 00010001 Loki 0000005F) [ 0.000000] ACPI: FACS 0x000000007EAE2000 000040 [ 0.000000] ACPI: FACS 0x000000007EAE2000 000040 [ 0.000000] ACPI: HPET 0x000000007EAD4000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: APIC 0x000000007EAD2000 0000BC (v02 APPLE Apple00 00000000 Loki 0000005F) [ 0.000000] ACPI: MCFG 0x000000007EAD1000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SSDT 0x000000007EAD0000 00008E (v01 PmRef Cpu0Cst 00003001 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EACF000 000030 (v01 PmRef Cpu0Ist 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EACE000 000047 (v01 PmRef Cpu1Cst 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EAC0000 000030 (v01 PmRef Cpu1Ist 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EABF000 000047 (v01 PmRef Cpu2Cst 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EABE000 000030 (v01 PmRef Cpu2Ist 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EABD000 000047 (v01 PmRef Cpu3Cst 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EABC000 000030 (v01 PmRef Cpu3Ist 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EABB000 000047 (v01 PmRef Cpu4Cst 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EABA000 000030 (v01 PmRef Cpu4Ist 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EAB9000 000047 (v01 PmRef Cpu5Cst 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EAB8000 000030 (v01 PmRef Cpu5Ist 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EAB7000 000047 (v01 PmRef Cpu6Cst 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EAB6000 000030 (v01 PmRef Cpu6Ist 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EAB5000 000047 (v01 PmRef Cpu7Cst 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EAB4000 000030 (v01 PmRef Cpu7Ist 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EAB1000 000CEC (v01 PmRef CpuPm 00003000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EAAD000 00018C (v01 PCIRef PciERisr 00001000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007EAA6000 000062 (v01 PCIRef PciERsr2 00001000 INTL 20050309) [ 0.000000] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000037fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x37fff1000-0x37fff5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000037fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff] [ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007eaa5fff] [ 0.000000] node 0: [mem 0x000000007eaaa000-0x000000007eaaafff] [ 0.000000] node 0: [mem 0x000000007eab2000-0x000000007eab3fff] [ 0.000000] node 0: [mem 0x000000007eac1000-0x000000007eac1fff] [ 0.000000] node 0: [mem 0x000000007eac8000-0x000000007eacdfff] [ 0.000000] node 0: [mem 0x000000007ead7000-0x000000007eae1fff] [ 0.000000] node 0: [mem 0x000000007eae3000-0x000000007eae3fff] [ 0.000000] node 0: [mem 0x000000007eb10000-0x000000007ebf8fff] [ 0.000000] node 0: [mem 0x000000007ec01000-0x000000007ec09fff] [ 0.000000] node 0: [mem 0x000000007ec0b000-0x000000007ec10fff] [ 0.000000] node 0: [mem 0x000000007ec18000-0x000000007ec1afff] [ 0.000000] node 0: [mem 0x000000007ec2a000-0x000000007ec33fff] [ 0.000000] node 0: [mem 0x000000007ec37000-0x000000007ec3bfff] [ 0.000000] node 0: [mem 0x000000007ec3d000-0x000000007ec5ffff] [ 0.000000] node 0: [mem 0x000000007ece1000-0x000000007ecfffff] [ 0.000000] node 0: [mem 0x000000007ed02000-0x000000007ed49fff] [ 0.000000] node 0: [mem 0x000000007ed4b000-0x000000007edbefff] [ 0.000000] node 0: [mem 0x000000007edc1000-0x000000007edd4fff] [ 0.000000] node 0: [mem 0x000000007edd6000-0x000000007edd6fff] [ 0.000000] node 0: [mem 0x000000007ede2000-0x000000007ee69fff] [ 0.000000] node 0: [mem 0x000000007ee6b000-0x000000007ee71fff] [ 0.000000] node 0: [mem 0x000000007ee73000-0x000000007f16ffff] [ 0.000000] node 0: [mem 0x000000007f172000-0x000000007f174fff] [ 0.000000] node 0: [mem 0x000000007f176000-0x000000007f180fff] [ 0.000000] node 0: [mem 0x000000007f182000-0x000000007f186fff] [ 0.000000] node 0: [mem 0x000000007f189000-0x000000007f18ffff] [ 0.000000] node 0: [mem 0x000000007f1a0000-0x000000007f1abfff] [ 0.000000] node 0: [mem 0x000000007f1b1000-0x000000007f1b3fff] [ 0.000000] node 0: [mem 0x000000007f1b5000-0x000000007f1befff] [ 0.000000] node 0: [mem 0x000000007f1c0000-0x000000007f219fff] [ 0.000000] node 0: [mem 0x000000007f22d000-0x000000007f245fff] [ 0.000000] node 0: [mem 0x000000007f247000-0x000000007f247fff] [ 0.000000] node 0: [mem 0x000000007f24a000-0x000000007f24dfff] [ 0.000000] node 0: [mem 0x000000007f24f000-0x000000007f24ffff] [ 0.000000] node 0: [mem 0x000000007f252000-0x000000007f266fff] [ 0.000000] node 0: [mem 0x000000007f268000-0x000000007f26bfff] [ 0.000000] node 0: [mem 0x000000007f27d000-0x000000007f27dfff] [ 0.000000] node 0: [mem 0x000000007f289000-0x000000007f28efff] [ 0.000000] node 0: [mem 0x000000007f290000-0x000000007f6bcfff] [ 0.000000] node 0: [mem 0x000000007f6be000-0x000000007f6bffff] [ 0.000000] node 0: [mem 0x000000007f6c5000-0x000000007f6e9fff] [ 0.000000] node 0: [mem 0x000000007f6ec000-0x000000007fbb5fff] [ 0.000000] node 0: [mem 0x000000007fbb7000-0x000000007fbb9fff] [ 0.000000] node 0: [mem 0x000000007fbbb000-0x000000007fbfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000037fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000037fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7eaa6000-0x7eaa9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7eaab000-0x7eab1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7eab4000-0x7eac0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7eac2000-0x7eac7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7eace000-0x7ead6fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7eae2000-0x7eae2fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7eae4000-0x7eae4fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7eae5000-0x7eaf6fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7eaf7000-0x7eb0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ebf9000-0x7ec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec0a000-0x7ec0afff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec11000-0x7ec11fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec12000-0x7ec12fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec13000-0x7ec15fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec16000-0x7ec16fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec17000-0x7ec17fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec1b000-0x7ec29fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec34000-0x7ec34fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec35000-0x7ec36fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec3c000-0x7ec3cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ec60000-0x7ece0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ed00000-0x7ed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ed4a000-0x7ed4afff] [ 0.000000] PM: Registered nosave memory: [mem 0x7edbf000-0x7edc0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7edd5000-0x7edd5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7edd7000-0x7ede1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ee6a000-0x7ee6afff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ee72000-0x7ee72fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f170000-0x7f171fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f175000-0x7f175fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f181000-0x7f181fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f187000-0x7f188fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f190000-0x7f19ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f1ac000-0x7f1b0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f1b4000-0x7f1b4fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f1bf000-0x7f1bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f21a000-0x7f21afff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f21b000-0x7f22cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f246000-0x7f246fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f248000-0x7f249fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f24e000-0x7f24efff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f250000-0x7f251fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f267000-0x7f267fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f26c000-0x7f27cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f27e000-0x7f285fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f286000-0x7f288fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f28f000-0x7f28ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f6bd000-0x7f6bdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f6c0000-0x7f6c4fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f6ea000-0x7f6eafff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f6eb000-0x7f6ebfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7fbb6000-0x7fbb6fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7fbba000-0x7fbbafff] [ 0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xfff8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff90000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0x80000000-0xfff8ffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff989e7fc00000 s104792 r8192 d30376 u262144 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3095089 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-0.bpo.2-amd64 root=/dev/mapper/hexa--vg-root ro nomodeset console=tty0 console=ttyS0,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 12253620K/12576980K available (6114K kernel code, 1235K rwdata, 2840K rodata, 1376K init, 808K bss, 323360K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2992.298 MHz processor [ 0.008011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.59 BogoMIPS (lpj=11969192) [ 0.014880] pid_max: default: 32768 minimum: 301 [ 0.016029] ACPI: Core revision 20160422 [ 0.028122] ACPI: 20 ACPI AML tables successfully acquired and loaded [ 0.032002] [ 0.036256] BUG: unable to handle kernel paging request at 000000018c03c798 [ 0.040000] IP: [<000000018b6767fd>] 0x18b6767fd [ 0.040000] PGD 3730c2063 PUD 3730dc063 PMD 0 [ 0.040000] Oops: 0002 [#1] SMP [ 0.040000] Modules linked in: [ 0.040000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-0.bpo.2-amd64 #1 Debian 4.8.11-1~bpo8+1 [ 0.040000] Hardware name: Apple Computer, Inc. Xserve1,1/Mac-F4208AC8, BIOS XS11.88Z.0080.B01.0706271533 06/27/07 [ 0.040000] task: ffffffff8200d540 task.stack: ffffffff82000000 [ 0.040000] RIP: 0010:[<000000018b6767fd>] [<000000018b6767fd>] 0x18b6767fd [ 0.040000] RSP: 0000:0000000079800fb0 EFLAGS: 00010002 [ 0.040000] RAX: 0000000000000000 RBX: 000000018b676810 RCX: 0000000000000001 [ 0.040000] RDX: 0000000000000030 RSI: ffffffff82006000 RDI: 000000007f6c23ff [ 0.040000] RBP: 00000003730d4000 R08: 00000003730d4000 R09: ffffffff82006000 [ 0.040000] R10: 00000000000005f8 R11: ffff989e7fff1000 R12: 0000000000000001 [ 0.040000] R13: 0000000000000030 R14: 0000000000002160 R15: 0000000000000206 [ 0.040000] FS: 0000000000000000(0000) GS:ffff989e7fc00000(0000) knlGS:0000000000000000 [ 0.040000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.040000] CR2: 000000018c03c798 CR3: 00000003730c0000 CR4: 00000000000006b0 [ 0.040000] Stack: [ 0.040000] 0000003000002160 730d400000000001 0000000082006000 0000000000000000 [ 0.040000] 0000000000000000 0000000000000000 0000000000000000 ffffffff816767bc [ 0.040000] 0000000000000000 000000008b676840 0000000000000000 0000000000000000 [ 0.040000] Call Trace: [ 0.040000] <UNK> [ 0.040000] Code: Bad RIP value. [ 0.040000] RIP [<000000018b6767fd>] 0x18b6767fd [ 0.040000] RSP <0000000079800fb0> [ 0.040000] CR2: 000000018c03c798 [ 0.040000] ---[ end trace f68728a0d3053b52 ]--- [ 0.040000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.040000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: Apple Computer, Inc. product_name: Xserve1,1 product_version: 1.0 chassis_vendor: Apple Computer, Inc. chassis_version: Mac-F4208AC8 bios_vendor: Apple Computer, Inc. bios_version: XS11.88Z.0080.B01.0706271533 board_vendor: Apple Computer, Inc. board_name: Mac-F4208AC8 board_version: PVT ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5000X Chipset Memory Controller Hub [8086:25c0] (rev 31) Subsystem: Intel Corporation Device [8086:7270] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 0 Capabilities: <access denied> 00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 [8086:25f7] (rev 31) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=01, subordinate=06, sec-latency=0 I/O behind bridge: 00003000-00004fff Memory behind bridge: 90000000-90afffff Prefetchable memory behind bridge: 0000000080000000-000000008fffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 Non-VGA unclassified device [0000]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev 31) !!! Invalid class 0000 for header type 01 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 [8086:25f8] (rev 31) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:05.0 Non-VGA unclassified device [0000]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev 31) !!! Invalid class 0000 for header type 01 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 [8086:25f9] (rev 31) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 90d00000-90dfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 Non-VGA unclassified device [0000]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev 31) !!! Invalid class 0000 for header type 01 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:08.0 System peripheral [0880]: Intel Corporation 5000 Series Chipset DMA Engine [8086:1a38] (rev 31) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 49 Region 0: Memory at 90e04000 (64-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ioatdma 00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 31) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: i5000_edac 00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 31) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 31) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev 31) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev 31) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev 31) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev 31) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1b.0 Audio device [0403]: Intel Corporation 631xESB/632xESB High Definition Audio Controller [8086:269a] (rev 09) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 50 Region 0: Memory at 90e00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 90c00000-90cfffff Prefetchable memory behind bridge: 0000000090f00000-00000000910fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 4: I/O ports at 50a0 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at 5080 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at 5060 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 22 Region 4: I/O ports at 5040 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: Memory at 90e04800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=10, subordinate=10, sec-latency=32 Memory behind bridge: 90b00000-90bfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: lpc_ich 00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (rev 09) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 50e8 [size=8] Region 1: I/O ports at 50fc [size=4] Region 2: I/O ports at 50e0 [size=8] Region 3: I/O ports at 50f8 [size=4] Region 4: I/O ports at 50c0 [size=16] Kernel driver in use: ata_piix 00:1f.2 SATA controller [0106]: Intel Corporation 631xESB/632xESB SATA AHCI Controller [8086:2681] (rev 09) (prog-if 01 [AHCI 1.0]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 0: I/O ports at 50d8 [size=8] Region 1: I/O ports at 50f4 [size=4] Region 2: I/O ports at 50d0 [size=8] Region 3: I/O ports at 50f0 [size=4] Region 4: I/O ports at 5020 [size=32] Region 5: Memory at 90e04400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller [8086:269b] (rev 09) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 5000 [size=32] 01:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=01, secondary=02, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00004fff Memory behind bridge: 90000000-909fffff Prefetchable memory behind bridge: 0000000080000000-000000008fffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 01:00.1 PIC [0800]: Intel Corporation 6311ESB/6321ESB I/OxAPIC Interrupt Controller [8086:3504] (rev 01) (prog-if 20 [IO(X)-APIC]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at 90a00000 (32-bit, non-prefetchable) [disabled] [size=4K] Capabilities: <access denied> 01:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Bus: primary=01, secondary=06, subordinate=06, sec-latency=64 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 02:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: 90900000-909fffff Prefetchable memory behind bridge: 0000000080000000-000000008fffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 02:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=02, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 02:02.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 [8086:3518] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=02, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 90000000-908fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV515 [Radeon X1300/X1550] [1002:7146] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV515 [Radeon X1300/X1550] [1002:7146] Physical Slot: 4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 0 Region 0: Memory at 80000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 4000 [size=256] Region 2: Memory at 90920000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at 90900000 [disabled] [size=128K] Capabilities: <access denied> 05:00.0 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) [8086:1096] (rev 01) Subsystem: Intel Corporation Device [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at 90820000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at 90400000 (32-bit, non-prefetchable) [size=4M] Region 2: I/O ports at 3020 [size=32] Expansion ROM at 90850000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: e1000e 05:00.1 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) [8086:1096] (rev 01) Subsystem: Intel Corporation Device [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin B routed to IRQ 48 Region 0: Memory at 90800000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at 90000000 (32-bit, non-prefetchable) [size=4M] Region 2: I/O ports at 3000 [size=32] Expansion ROM at 90860000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: e1000e 05:00.2 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Redirection [8086:1084] (rev 01) (prog-if 85 [Master SecO PriO]) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 0 Region 0: I/O ports at 3058 [disabled] [size=8] Region 1: I/O ports at 306c [disabled] [size=4] Region 2: I/O ports at 3050 [disabled] [size=8] Region 3: I/O ports at 3068 [disabled] [size=4] Region 4: I/O ports at 3040 [disabled] [size=16] Expansion ROM at 90870000 [disabled] [size=64K] Capabilities: <access denied> 05:00.4 IPMI SMIC interface [0c07]: Intel Corporation 631xESB/632xESB IPMI/KCS0 [8086:1086] (rev 01) (prog-if 01) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 0 Region 0: Memory at 90841000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 3064 [disabled] [size=4] Capabilities: <access denied> 05:00.7 IPMI SMIC interface [0c07]: Intel Corporation 631xESB/632xESB BT [8086:1089] (rev 01) (prog-if 02) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 0 Region 0: Memory at 90840000 (32-bit, non-prefetchable) [disabled] [size=4K] Region 1: I/O ports at 3060 [disabled] [size=4] Capabilities: <access denied> 0a:00.0 PCI bridge [0604]: Intel Corporation 41210 [Lanai] Serial to Parallel PCI Bridge (A-Segment Bridge) [8086:0340] (rev 09) (prog-if 00 [Normal decode]) Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=64 I/O behind bridge: 00002000-00002fff Memory behind bridge: 90d00000-90dfffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0a:00.2 PCI bridge [0604]: Intel Corporation 41210 [Lanai] Serial to Parallel PCI Bridge (B-Segment Bridge) [8086:0341] (rev 09) (prog-if 00 [Normal decode]) Physical Slot: 1 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Bus: primary=0a, secondary=0c, subordinate=0c, sec-latency=64 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0b:04.0 Fibre Channel [0c04]: LSI Logic / Symbios Logic FC929X Fibre Channel Adapter [1000:0626] (rev 81) Subsystem: LSI Logic / Symbios Logic Device [1000:1170] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min, 2500ns max), Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 2100 [disabled] [size=256] Region 1: Memory at 90d00000 (64-bit, non-prefetchable) [size=64K] Region 3: Memory at 90d10000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: mptfc 0b:04.1 Fibre Channel [0c04]: LSI Logic / Symbios Logic FC929X Fibre Channel Adapter [1000:0626] (rev 81) Subsystem: LSI Logic / Symbios Logic Device [1000:1170] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min, 2500ns max), Cache Line Size: 256 bytes Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 2000 [disabled] [size=256] Region 1: Memory at 90d20000 (64-bit, non-prefetchable) [size=64K] Region 3: Memory at 90d30000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: mptfc 0e:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A [8086:032c] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=0e, secondary=0f, subordinate=0f, sec-latency=64 I/O behind bridge: 00001000-00001fff Memory behind bridge: 90c00000-90cfffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0f:02.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS [1000:0050] (rev 02) Subsystem: LSI Logic / Symbios Logic Device [1000:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min, 2500ns max), Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 1000 [disabled] [size=256] Region 1: Memory at 90c10000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at 90c00000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: mptsas 10:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller [104c:8025] (rev 01) (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at 90b04000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at 90b00000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 05ac:8261 Apple, Inc. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04d9:1818 Holtek Semiconductor, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 8.6 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.8.0-0.bpo.2-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2 ii kmod 18-3 ii linux-base 4.3~bpo8+1 Versions of packages linux-image-4.8.0-0.bpo.2-amd64 recommends: ii firmware-linux-free 3.3 ii irqbalance 1.1.0-2~bpo8+1 Versions of packages linux-image-4.8.0-0.bpo.2-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | grub-efi-amd64 | extlinux <none> pn linux-doc-4.8 <none> Versions of packages linux-image-4.8.0-0.bpo.2-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information