Package: installation-reports
Debian-installer-version: Debian GNU/Linux testing "Etch" - Official
Snapshot i386 Binay-1 (20060218)
uname -a:
Date: 20060218 @ 1900
Method: How did you install? Booted netinst cd
What did you boot off? cdrom
If network install, from where? debian.org. Proxied? no
Machine: ASUS P4C800-Deluxe
Processor: Intel P4-HT 3.0GHz
Memory: 1G
Root Device: <IDE? SCSI? Name of device? root on LVM, boot on
standard linux ext3 partition on /dev/hda>
Root Size/partition table: 20GB LVM /dev/mapper/VolGroup00-Debian--Etch_00
Output of lspci and lspci -n:
P4C800Deluxe:/# lspci
0000:00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory
Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP
Controller (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R)
IDE Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA
Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280
[Radeon 9200] (rev 01)
0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon
9200] (Secondary) (rev 01)
0000:02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
0000:02:04.0 RAID bus controller: Promise Technology, Inc. PDC20378
(FastTrak 378/SATA 378) (rev 02)
0000:02:05.0 Ethernet controller: 3Com Corporation 3c940
10/100/1000Base-T [Marvell] (rev 12)
P4C800Deluxe:/# lspci -n
0000:00:00.0 0600: 8086:2578 (rev 02)
0000:00:01.0 0604: 8086:2579 (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:01:00.0 0300: 1002:5961 (rev 01)
0000:01:00.1 0380: 1002:5941 (rev 01)
0000:02:03.0 0c00: 1106:3044 (rev 80)
0000:02:04.0 0104: 105a:3373 (rev 02)
0000:02:05.0 0200: 10b7:1700 (rev 12)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
LVs are not visible during custom partitioning phase of install,
therefor, I could not specify the root partition. LV partitions were
created ahead of time with another distro and are seen by Fedora, SuSE,
RHEL and Mandriva. I believe they are seen, but not displayed, since I
could select LVM and select delete. But I couldn't get them to display
on the assignment screen without doing some magic (see next).
There is a workaround, but it should not be needed: go to console 2 and
vgscan, vgchange, then back to the partitioner and they are then
displayed for editing and assignment.
This is a multi-boot test machine configured with LVM2 on top of
software raid5.
--
Regards,
Old Fart
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
