Please find the boot logs attached
U-Boot 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:59:22 +0200), Build: jenkins-u-boot-imx6-variant=sdhc-2
CPU: Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 48C
Reset cause: WDOG
Board: MX6 HummingBoard
Watchdog enabled
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
auto-detected panel HDMI
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
Net: FEC
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
297 bytes read in 121 ms (2 KiB/s)
i.MX6
1: default
2: hack
Enter choice: 1
1: default
Retrieving file: /boot/extlinux/../initrd
8817476 bytes read in 690 ms (12.2 MiB/s)
Retrieving file: /boot/extlinux/../zImage
7137904 bytes read in 535 ms (12.7 MiB/s)
append: root=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 rootfstype=auto rootwait
Retrieving file: /boot/extlinux/../dtb-dir/imx6q-hummingboard.dtb
45535 bytes read in 854 ms (51.8 KiB/s)
## Flattened Device Tree blob at 18000000
Booting using the fdt blob at 0x18000000
Using Device Tree in place at 18000000, end 1800e1de
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.124-imx6-sr (abuild@ddd2fcb3ed55) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Sat Sep 15 05:01:08 UTC 2018
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: SolidRun HummingBoard Dual/Quad
[ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 14 pages/cpu @db6ba000 s26764 r8192 d22388 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: root=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 rootfstype=auto rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 686640K/1048576K available (9216K kernel code, 418K rwdata, 3088K rodata, 1024K init, 549K bss, 34256K reserved, 327680K cma-reserved, 262144K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB)
[ 0.000000] .init : 0xc0e00000 - 0xc0f00000 (1024 kB)
[ 0.000000] .data : 0xc0f00000 - 0xc0f68880 ( 419 kB)
[ 0.000000] .bss : 0xc0f68880 - 0xc0ff1dd8 ( 550 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C-310 errata 752271 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[ 0.000000] Switching to timer-based delay loop, resolution 333ns
[ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[ 0.000024] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[ 0.001250] Console: colour dummy device 80x30
[ 0.001747] console [tty0] enabled
[ 0.001778] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000)
[ 0.001813] pid_max: default: 32768 minimum: 301
[ 0.001922] Security Framework initialized
[ 0.001949] SELinux: Initializing.
[ 0.002050] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002076] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002853] CPU: Testing write buffer coherency: ok
[ 0.003213] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003303] Setting up static identity map for 0x10100000 - 0x10100058
[ 0.005596] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.005701] Brought up 2 CPUs
[ 0.005748] SMP: Total of 2 processors activated (12.00 BogoMIPS).
[ 0.005767] CPU: All CPU(s) started in SVC mode.
[ 0.006675] devtmpfs: initialized
[ 0.034865] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 253580
[ 0.035624] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.035989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.036040] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.036238] atomic64_test: passed
[ 0.036265] pinctrl core: initialized pinctrl subsystem
[ 0.037325] NET: Registered protocol family 16
[ 0.044683] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.049594] cpuidle: using governor menu
[ 0.049753] CPU identified as i.MX6Q, silicon rev 1.5
[ 0.072401] No ATAGs?
[ 0.072440] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.072481] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.073318] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.074627] imx-gpc 20dc000.gpc: no fsl,ldo-bypass found!
[ 0.074778] imx-gpc 20dc000.gpc: Registered imx-gpc
[ 0.106473] mxs-dma 110000.dma-apbh: initialized
[ 0.108620] v_3v2: supplied by v_5v0
[ 0.108697] vcc_3v3: supplied by v_3v2
[ 0.108959] v_sd: supplied by v_3v2
[ 0.110005] v_usb2: supplied by v_5v0
[ 0.110476] v_usb1: supplied by v_5v0
[ 0.111239] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 29, base_baud = 5000000) is a IMX
[ 0.111289] Console IMX rounded baud rate from 114943 to 114900
[ 0.602174] console [ttymxc0] enabled
[ 0.607005] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 76, base_baud = 5000000) is a IMX
[ 0.615891] serial serial0: tty port ttymxc3 registered
[ 0.621496] vgaarb: loaded
[ 0.624987] SCSI subsystem initialized
[ 0.629259] usbcore: registered new interface driver usbfs
[ 0.634857] usbcore: registered new interface driver hub
[ 0.640278] usbcore: registered new device driver usb
[ 0.645522] 2000000.aips-bus:usbphy_nop1 supply vcc not found, using dummy regulator
[ 0.653461] 2000000.aips-bus:usbphy_nop2 supply vcc not found, using dummy regulator
[ 0.661869] imx-i2c 21a0000.i2c: stop-delay=0, inter-byte-delay=0
[ 0.668555] i2c i2c-0: IMX I2C adapter registered
[ 0.673317] i2c i2c-0: can't use DMA, using PIO instead.
[ 0.678999] imx-i2c 21a4000.i2c: stop-delay=0, inter-byte-delay=0
[ 0.685454] i2c i2c-1: IMX I2C adapter registered
[ 0.690210] i2c i2c-1: can't use DMA, using PIO instead.
[ 0.695742] imx-i2c 21a8000.i2c: stop-delay=0, inter-byte-delay=0
[ 0.702063] i2c i2c-2: IMX I2C adapter registered
[ 0.706818] i2c i2c-2: can't use DMA, using PIO instead.
[ 0.712294] media: Linux media interface: v0.10
[ 0.716910] Linux video capture interface: v2.00
[ 0.721667] pps_core: LinuxPPS API ver. 1 registered
[ 0.726674] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it>
[ 0.735891] PTP clock support registered
[ 0.743601] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.754601] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.763071] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
[ 0.769829] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
[ 0.777771] MIPI CSI2 driver module loaded
[ 0.782024] Advanced Linux Sound Architecture Driver Initialized.
[ 0.789241] NetLabel: Initializing
[ 0.792695] NetLabel: domain hash size = 128
[ 0.797086] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.802133] NetLabel: unlabeled traffic allowed by default
[ 0.808077] clocksource: Switched to clocksource mxc_timer1
[ 0.813851] VFS: Disk quotas dquot_6.6.0
[ 0.817886] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.836108] NET: Registered protocol family 2
[ 0.841210] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.848407] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.855042] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.861615] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.867632] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.874311] NET: Registered protocol family 1
[ 0.879320] RPC: Registered named UNIX socket transport module.
[ 0.885312] RPC: Registered udp transport module.
[ 0.890061] RPC: Registered tcp transport module.
[ 0.894816] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.901566] Trying to unpack rootfs image as initramfs...
[ 1.623329] Freeing initrd memory: 8612K
[ 1.627850] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 1.637557] Bus freq driver module loaded
[ 1.642553] audit: initializing netlink subsys (disabled)
[ 1.648090] audit: type=2000 audit(1.073:1): initialized
[ 1.654489] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.669264] NFS: Registering the id_resolver key type
[ 1.674404] Key type id_resolver registered
[ 1.678635] Key type id_legacy registered
[ 1.682696] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.689690] fuse init (API version 7.26)
[ 5.420268] NET: Registered protocol family 38
[ 5.424842] bounce: pool size: 64 pages
[ 5.428804] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 5.436380] io scheduler noop registered
[ 5.440362] io scheduler deadline registered
[ 5.444866] io scheduler cfq registered (default)
[ 5.451354] imx6_pcie_probe: reset gp 68
[ 5.455553] OF: PCI: host bridge /soc/pcie@0x01000000 ranges:
[ 5.461357] OF: PCI: No bus range found for /soc/pcie@0x01000000, using [bus 00-ff]
[ 5.469253] OF: PCI: IO 0x01f80000..0x01f8ffff -> 0x00000000
[ 5.475219] OF: PCI: MEM 0x01000000..0x01efffff -> 0x01000000
[ 5.730268] imx6q-pcie 1ffc000.pcie: phy link never came up
[ 5.735893] imx6q-pcie 1ffc000.pcie: Link never came up
[ 5.744213] imx6q-pcie 1ffc000.pcie: failed to initialize host
[ 5.750156] imx6q-pcie: probe of 1ffc000.pcie failed with error -110
[ 5.757755] 20e0000.hdmi_video supply HDMI not found, using dummy regulator
[ 5.765365] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[ 5.773255] fbcvt: 1920x1080@60: CVT Name - 2.073M9
[ 5.778276] mxc_sdc_fb fb@0: registered mxc display driver hdmi IPU1_DISP0
[ 5.785204] mxc_sdc_fb fb@0: registered mxc display driver hdmi
[ 5.929925] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
[ 5.930090] imx-ipuv3 2400000.ipu: try ipu internal clk
[ 5.937125] imx-ipuv3 2400000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1
[ 5.937135] find_field: [0] = 0x7ff, max=23
[ 5.937141] find_field: [1] = 0xfff, max=23
[ 5.937145] find_field: [2] = 0x17ff, max=23
[ 5.937149] find_field: [0] = 0x820, max=29
[ 5.937199] imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[ 5.987274] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
[ 5.987389] imx-ipuv3 2400000.ipu: try ipu internal clk
[ 5.994114] imx-ipuv3 2400000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1
[ 6.033180] Console: switching to colour frame buffer device 240x67
[ 6.110246] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.120558] [drm] Initialized
[ 6.124109] [drm] Initialized vivante 1.0.0 20120216 on minor 0
[ 6.144439] brd: module loaded
[ 6.147812] loop: module loaded
[ 6.152255] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1025, using 00000024
[ 6.160187] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 3330, using 00000480
[ 6.168201] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000
[ 6.176119] ahci-imx 2200000.sata: fsl,receive-eq-mdB value 3000, using 05000000
[ 6.187458] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[ 6.194705] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 6.203795] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
[ 6.215242] scsi host0: ahci-imx
[ 6.218948] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 83
[ 6.228682] libphy: Fixed MDIO Bus: probed
[ 6.233850] 2188000.ethernet supply phy not found, using dummy regulator
[ 6.244429] pps pps0: new PPS source ptp0
[ 6.259196] libphy: fec_enet_mii_bus: probed
[ 6.264258] fec 2188000.ethernet eth0: registered PHC device 0
[ 6.270855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.277618] ehci-pci: EHCI PCI platform driver
[ 6.282294] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.288751] ohci-pci: OHCI PCI platform driver
[ 6.293420] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.300205] usbcore: registered new interface driver usb-storage
[ 6.306502] usbcore: registered new interface driver ums-usbat
[ 6.312651] usbcore: registered new interface driver usbserial
[ 6.318735] usbcore: registered new interface driver usbserial_generic
[ 6.325527] usbserial: USB Serial support registered for generic
[ 6.341410] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
[ 6.358377] setup_reset_gpios:-2, flags 0
[ 6.375811] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 6.389746] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 6.414119] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 6.428404] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.443961] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.460022] usb usb1: Product: EHCI Host Controller
[ 6.473681] usb usb1: Manufacturer: Linux 4.9.124-imx6-sr ehci_hcd
[ 6.488737] usb usb1: SerialNumber: ci_hdrc.0
[ 6.502658] hub 1-0:1.0: USB hub found
[ 6.515270] hub 1-0:1.0: 1 port detected
[ 6.528539] setup_reset_gpios:-2, flags 0
[ 6.544655] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 6.558354] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 6.582099] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 6.596275] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.611790] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.627706] usb usb2: Product: EHCI Host Controller
[ 6.641171] usb usb2: Manufacturer: Linux 4.9.124-imx6-sr ehci_hcd
[ 6.655962] usb usb2: SerialNumber: ci_hdrc.1
[ 6.669535] hub 2-0:1.0: USB hub found
[ 6.681807] hub 2-0:1.0: 1 port detected
[ 6.688490] random: fast init done
[ 6.699454] mxc_edid_parse: Vertical blanking adjusted for 720x400p-70. Please check modedb!
[ 6.699459] mxc_edid_parse: Vertical blanking adjusted for 640x480p-67. Please check modedb!
[ 6.699463] mxc_edid_parse: Vertical blanking adjusted for 640x480p-75. Please check modedb!
[ 6.699467] mxc_edid_parse: Vertical blanking adjusted for 800x600p-56. Please check modedb!
[ 6.699471] mxc_edid_parse: Vertical blanking adjusted for 800x600p-60. Please check modedb!
[ 6.699474] mxc_edid_parse: Vertical blanking adjusted for 800x600p-75. Please check modedb!
[ 6.699478] mxc_edid_parse: Vertical blanking adjusted for 832x624p-75. Please check modedb!
[ 6.699482] mxc_edid_parse: Vertical blanking adjusted for 1024x768p-75. Please check modedb!
[ 6.699486] mxc_edid_parse: Vertical blanking adjusted for 1280x1024p-75. Please check modedb!
[ 6.699489] mxc_edid_parse: Vertical blanking adjusted for 1152x864p-75. Please check modedb!
[ 6.699493] mxc_edid_parse: Vertical blanking adjusted for 1152x864p-75. Please check modedb!
[ 6.699497] mxc_edid_parse: Vertical blanking adjusted for 1280x800p-60. Please check modedb!
[ 6.699500] mxc_edid_parse: Vertical blanking adjusted for 1280x960p-60. Please check modedb!
[ 6.699504] mxc_edid_parse: Vertical blanking adjusted for 1280x1024p-60. Please check modedb!
[ 6.699507] mxc_edid_parse: Vertical blanking adjusted for 1440x900p-60. Please check modedb!
[ 6.699511] mxc_edid_parse: Vertical blanking adjusted for 1440x900p-75. Please check modedb!
[ 6.699514] mxc_edid_parse: Vertical blanking adjusted for 1600x1200p-60. Please check modedb!
[ 6.699518] mxc_edid_parse: Vertical blanking adjusted for 1680x1050p-60. Please check modedb!
[ 6.706043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.707098] ata1.00: ATA-9: TS16GMSA370, 20140516, max UDMA/133
[ 6.707106] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 6.707455] ata1.00: configured for UDMA/133
[ 6.708029] scsi 0:0:0:0: Direct-Access ATA TS16GMSA370 0516 PQ: 0 ANSI: 5
[ 7.064956] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
[ 7.065132] imx-ipuv3 2400000.ipu: try ipu internal clk
[ 7.065291] mousedev: PS/2 mouse device common for all mice
[ 7.066640] rtc-pcf8523 0-0068: RTC reports battery is low
[ 7.066647] rtc-pcf8523 0-0068: starting calibration at 12.5 pf
[ 7.071668] rtc-pcf8523 0-0068: rtc core: registered rtc-pcf8523 as rtc0
[ 7.072107] imx-ipuv3 2400000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1
[ 7.072119] check_alarm_past: alarm in the past
[ 7.072327] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
[ 7.072447] i2c /dev entries driver
[ 7.073000] IR Sharp protocol handler initialized
[ 7.073003] IR XMP protocol handler initialized
[ 7.073515] mxc_v4l2_output v4l2_out: V4L2 device registered as video16
[ 7.073680] mxc_v4l2_output v4l2_out: V4L2 device registered as video17
[ 7.074967] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
[ 7.075436] device-mapper: uevent: version 1.0.3
[ 7.075784] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-de...@redhat.com
[ 7.081213] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 7.081554] sd 0:0:0:0: [sda] Write Protect is off
[ 7.081673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.082881] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.084420] sdhci: Secure Digital Host Controller Interface driver
[ 7.084422] sdhci: Copyright(c) Pierre Ossman
[ 7.084424] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.085401] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq
[ 7.088977] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.334200] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
[ 7.335198] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
[ 7.381112] usb 2-1: new high-speed USB device number 2 using ci_hdrc
[ 7.381327] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[ 7.382409] mxc_vpu 2040000.vpu_fsl: VPU initialized
[ 7.382878] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[ 7.383328] HDMI-CEC initialized
[ 7.384355] caam 2100000.caam: ERA source: CAAMVID.
[ 7.384391] caam 2100000.caam: AXI pipeline throttling enabled.
[ 7.385179] caam 2100000.caam: Entropy delay = 3200
[ 7.445967] caam 2100000.caam: Instantiated RNG4 SH0
[ 7.506728] caam 2100000.caam: Instantiated RNG4 SH1
[ 7.506737] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
[ 7.506743] caam 2100000.caam: job rings = 2, qi = 0
[ 7.693723] usb 2-1: New USB device found, idVendor=04b4, idProduct=6570
[ 7.693732] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.693738] usb 2-1: Product: USB2.0 Hub
[ 7.706590] hub 2-1:1.0: USB hub found
[ 7.721052] hub 2-1:1.0: 4 ports detected
[ 7.773827] alg: No test for authenc(hmac(sha224),ecb(cipher_null)) (authenc-hmac-sha224-ecb-cipher_null-caam)
[ 7.792509] alg: No test for authenc(hmac(sha256),ecb(cipher_null)) (authenc-hmac-sha256-ecb-cipher_null-caam)
[ 7.811116] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam)
[ 7.827827] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam)
[ 7.846305] mmc0: host does not support reading read-only switch, assuming write-enable
[ 7.865241] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam)
[ 7.884549] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
[ 7.904673] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam)
[ 7.929306] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam)
[ 7.949231] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
[ 7.967904] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam)
[ 7.988855] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam)
[ 8.013133] mmc0: new ultra high speed DDR50 SDXC card at address 0001
[ 8.029517] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam)
[ 8.030220] mmcblk0: mmc0:0001 00000 59.6 GiB
[ 8.067587] mmcblk0: p1
[ 8.082683] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam)
[ 8.104266] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
[ 8.124769] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam)
[ 8.150431] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam)
[ 8.174273] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam)
[ 8.195518] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam)
[ 8.216255] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 8.236285] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 8.257613] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam)
[ 8.278982] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 8.299609] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 8.321639] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam)
[ 8.343390] caam algorithms registered in /proc/crypto
[ 8.374291] caam_jr 2101000.jr0: registering rng-caam
[ 8.390591] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.406822] usbcore: registered new interface driver usbhid
[ 8.422903] usbhid: USB HID core driver
[ 8.441017] sgtl5000 0-000a: sgtl5000 revision 0x11
[ 8.459707] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1
[ 8.526233] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 8.598034] fsl-spdif-dai 2004000.spdif: imx_pcm_dma_init failed: -517
[ 8.617290] imx-sgtl5000 sound-sgtl5000: ASoC: CPU DAI (null) not registered
[ 8.634780] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[ 8.652483] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
[ 8.669443] imx-spdif sound-spdif: snd_soc_register_card failed: -517
[ 8.711833] imx-audio-hdmi sound-hdmi: hdmi-hifi.0 <-> soc:hdmi_audio@00120000 mapping ok
[ 8.732396] Initializing XFRM netlink socket
[ 8.747576] NET: Registered protocol family 10
[ 8.765538] mip6: Mobile IPv6
[ 8.780796] NET: Registered protocol family 17
[ 8.795497] 8021q: 802.1Q VLAN Support v1.8
[ 8.811905] Key type dns_resolver registered
[ 8.832196] cpu cpu0: Registered imx6q-cpufreq
[ 8.859129] registered taskstats version 1
[ 8.897232] Key type big_key registered
[ 8.920763] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C
[ 8.941239] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 8.969317] fsl-ssi-dai 2028000.ssi: Unbalanced pm_runtime_enable!
[ 9.039747] fsl-spdif-dai 2004000.spdif: Unbalanced pm_runtime_enable!
[ 9.057578] fsl-spdif-dai 2004000.spdif: imx_pcm_dma_init failed: -517
[ 9.072959] imx-sgtl5000 sound-sgtl5000: ASoC: CPU DAI (null) not registered
[ 9.088514] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[ 9.104239] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
[ 9.119260] imx-spdif sound-spdif: snd_soc_register_card failed: -517
[ 9.136255] rtc-pcf8523 0-0068: hctosys: unable to read the hardware clock
[ 9.152311] brcm_reg: disabling
[ 9.163929] ALSA device list:
[ 9.175371] #0: imx-hdmi-soc
[ 9.189904] Freeing unused kernel memory: 1024K
+ export PATH=/sbin:/usr/sbin:/bin:/usr/bin
+ [ -d /dev ]
+ [ -d /root ]
+ [ -d /sys ]
+ mkdir /sys
+ [ -d /proc ]
+ mkdir /proc
+ [ -d /tmp ]
+ mkdir /tmp
+ mkdir -p /var/lock
+ mount -t sysfs -o nodev,noexec,nosuid sysfs /sys
+ mount -t proc -o nodev,noexec,nosuid proc /proc
+ cat /proc/cmdline
+ quiet=n
+ echo Loading, please wait...
Loading, please wait...
+ export quiet
+ mount -t devtmpfs -o nosuid,mode=0755 udev /dev
+ mkdir /dev/pts
+ mount -t devpts -o noexec,nosuid,gid=5,mode=0620 devpts /dev/pts
+ mount -t tmpfs -o noexec,nosuid,size=10%,mode=0755 tmpfs /run
+ mkdir -m 0755 /run/initramfs
+ export DPKG_ARCH=
+ . /conf/arch.conf
+ D[ 9.264636] random: systemd-udevd: uninitialized urandom read (16 bytes read)
PKG_ARCH=armhf
+ export MODPROBE[ 9.273890] random: udevadm: uninitialized urandom read (16 bytes read)
_OPTIONS=-qb
+ export ROOT=
+ e[ 9.275676] random: udevadm: uninitialized urandom read (16 bytes read)
xport ROOTDELAY=
+ export ROOTFLAGS=
+ export ROOTFSTYPE=
+ export IP=
+ export BOOT=
+ export BOOTIF=
+ export UBIMTD=
+ export break=
+ export init=/sbin/init
+ export readonly=y
+ export rootmnt=/root
+ export debug=
+ export panic=
+ export blacklist=
+ export resume=
+ export resume_offset=
+ export drop_caps=
+ export fastboot=n
+ export forcefsck=n
+ export fsckfix=
+ . /conf/initramfs.conf
+ MODULES=most
+ BUSYBOX=auto
+ KEYMAP=n
+ COMPRESS=gzip
+ DEVICE=
+ NFSROOT=auto
+ [ -f conf/conf.d/* ]
+ . /scripts/functions
+ cat /proc/cmdline
+ ROOT=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ [ -z ]
+ [ UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 = /dev/nfs ]
+ ROOTFSTYPE=auto
+ [ -z ]
+ BOOT=local
+ [ -n ]
+ [ = none ]
+ resume=
+ maybe_break top
+ run_scripts /scripts/init-top
+ initdir=/scripts/init-top
+ [ ! -d /scripts/init-top ]
+ shift
+ . /scripts/init-top/ORDER
+ /scripts/init-top/all_generic_ide
+ [ -e /conf/param.conf ]
+ /scripts/init-top/blacklist
+ [ -e /conf/param.conf ]
+ /scripts/init-top/keymap
+ [ -e /conf/param.conf ]
+ /scripts/init-top/udev
starting version 232
[ 9.594816] imx-sdma 20ec000.sdma: no iram assigned, using external mem
[ 9.616167] imx-sdma 20ec000.sdma: loaded firmware 3.3
[ 9.647555] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 9.670309] fsl-ssi-dai 2028000.ssi: Unbalanced pm_runtime_enable!
[ 9.747534] fsl-spdif-dai 2004000.spdif: Unbalanced pm_runtime_enable!
[ 9.782772] alloc_contig_range: [2c0a0, 2c0b0) PFNs busy
[ 9.801022] imx-sgtl5000 sound-sgtl5000: sgtl5000 <-> 2028000.ssi mapping ok
[ 9.821339] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
[ 9.839952] spi_imx 200c000.ecspi: probed
+ [ -e /conf/param.conf ]
+ maybe_break modules
+ [ n != y ]
+ log_begin_msg Loading essential drivers
+ _log_msg Begin: Loading essential drivers ...
+ [ n = y ]
+ printf Begin: Loading essential drivers ...
Begin: Loading essential drivers ... + [ -n ]
+ load_modules
+ [ -e /conf/modules ]
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ [ ]
+ maybe_break premount
+ [ n != y ]
+ log_begin_msg Running /scripts/init-premount
+ _log_msg Begin: Running /scripts/init-premount ...
+ [ n = y ]
+ printf Begin: Running /scripts/init-premount ...
Begin: Running /scripts/init-premount ... + run_scripts /scripts/init-premount
+ initdir=/scripts/init-premount
+ [ ! -d /scripts/init-premount ]
+ return
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ maybe_break mount
+ log_begin_msg Mounting root file system
+ _log_msg Begin: Mounting root file system ...
+ [ n = y ]
+ printf Begin: Mounting root file system ...
Begin: Mounting root file system ... + . /scripts/local
+ . /scripts/nfs
+ . /scripts/local
+ parse_numeric UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ return
+ maybe_break mountroot
+ mount_top
+ local_top
+ [ != yes ]
+ [ n != y ]
+ log_begin_msg Running /scripts/local-top
+ _log_msg Begin: Running /scripts/local-top ...
+ [ n = y ]
+ printf Begin: Running /scripts/local-top ...
Begin: Running /scripts/local-top ... + run_scripts /scripts/local-top
+ initdir=/scripts/local-top
+ [ ! -d /scripts/local-top ]
+ return
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ local_top_used=yes
+ [ -z ]
+ cat /proc/uptime
+ local_top_time=9.37 9.30
+ local_top_time=9
+ local_top_time=10
+ export local_top_time
+ mount_premount
+ local_premount
+ [ != yes ]
+ [ n != y ]
+ log_begin_msg Running /scripts/local-premount
+ _log_msg Begin: Running /scripts/local-premount ...
+ [ n = y ]
+ printf Begin: Running /scripts/local-premount ...
Begin: Running /scripts/local-premount ... + run_scripts /scripts/local-premount
+ initdir=/scripts/local-premount
+ [ ! -d /scripts/local-premount ]
+ shift
+ . /scripts/local-premount/ORDER
+ /scripts/local-premount/ntfs_3g
+ [ -e /conf/param.conf ]
+ /scripts/local-premount/resume
+ [ -e /conf/param.conf ]
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ local_premount_used=yes
+ mountroot
+ local_mount_root
+ local_top
+ [ yes != yes ]
+ local_top_used=yes
+ [ -z 10 ]
+ local_device_setup UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 root file system
+ local dev_id=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ local name=root file system
+ local may_panic=true
+ local real_dev
+ local time_elapsed
+ local count
+ wait_for_udev 10
+ command -v udevadm
+ udevadm settle --timeout=10
+ [ -n ]
+ [ UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 = UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 ]
+ [ febfadf2-ffa2-48ad-9802-d7b67b5e7818 = UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 ]
+ resolve_device UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ DEV=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ blkid -l -t UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 -o device
+ DEV=/dev/mmcblk0p1
+ [ -e /dev/mmcblk0p1 ]
+ echo /dev/mmcblk0p1
+ real_dev=/dev/mmcblk0p1
+ get_fstype /dev/mmcblk0p1
+ local FS FSTYPE FSSIZE RET
+ FS=/dev/mmcblk0p1
+ FSTYPE=unknown
+ fstype /dev/mmcblk0p1
+ eval FSTYPE=ext4 FSSIZE=64030244864
+ FSTYPE=ext4 FSSIZE=64030244864
+ [ ext4 = unknown ]
+ RET=0
+ [ -z ext4 ]
+ echo ext4
+ return 0
+ resolve_device UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ DEV=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ blkid -l -t UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 -o device
+ DEV=/dev/mmcblk0p1
+ [ -e /dev/mmcblk0p1 ]
+ echo /dev/mmcblk0p1
+ real_dev=/dev/mmcblk0p1
+ get_fstype /dev/mmcblk0p1
+ local FS FSTYPE FSSIZE RET
+ FS=/dev/mmcblk0p1
+ FSTYPE=unknown
+ fstype /dev/mmcblk0p1
+ eval FSTYPE=ext4 FSSIZE=64030244864
+ FSTYPE=ext4 FSSIZE=64030244864
+ [ ext4 = unknown ]
+ RET=0
+ [ -z ext4 ]
+ echo ext4
+ return 0
+ DEV=/dev/mmcblk0p1
+ ROOT=/dev/mmcblk0p1
+ [ -z auto ]
+ FSTYPE=auto
+ local_premount
+ [ yes != yes ]
+ local_premount_used=yes
+ [ y = y ]
+ roflag=-r
+ modprobe auto
+ checkfs /dev/mmcblk0p1 root auto
+ _checkfs_once /dev/mmcblk0p1 root auto
+ DEV=/dev/mmcblk0p1
+ NAME=root
+ TYPE=auto
+ [ root = / ]
+ FSCK_LOGFILE=/run/initramfs/fsck.log
+ FSCK_STAMPFILE=/run/initramfs/fsck-root
+ [ auto = auto ]
+ get_fstype /dev/mmcblk0p1
+ local FS FSTYPE FSSIZE RET
+ FS=/dev/mmcblk0p1
+ FSTYPE=unknown
+ fstype /dev/mmcblk0p1
+ eval FSTYPE=ext4 FSSIZE=64030244864
+ FSTYPE=ext4 FSSIZE=64030244864
+ [ ext4 = unknown ]
+ RET=0
+ [ -z ext4 ]
+ echo ext4
+ return 0
+ TYPE=ext4
+ FSCKCODE=0
+ command -v fsck
+ log_warning_msg fsck not present, so skipping root file system
+ _log_msg Warning: fsck not present, so skipping root file system\n
+ [ n = y ]
+ printf Warning: fsck not present, so skipping root file system\n
Warning: fsck not present, so skipping root file system
+ return
+ [ auto != unknown ]
+ mount -r -t auto /dev/mmcblk0p1 /root
mount: No such device
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ read_fstab_entry /usr
+ found=1
+ [ -f /root/etc/fstab ]
+ return 1
+ mount_bottom
+ local_bottom
+ [ yes = yes ]
+ [ n != y ]
+ log_begin_msg Running /scripts/local-bottom
+ _log_msg Begin: Running /scripts/local-bottom ...
+ [ n = y ]
+ printf Begin: Running /scripts/local-bottom ...
Begin: Running /scripts/local-bottom ... + run_scripts /scripts/local-bottom
+ initdir=/scripts/local-bottom
+ [ ! -d /scripts/local-bottom ]
+ shift
+ . /scripts/local-bottom/ORDER
+ /scripts/local-bottom/ntfs_3g
+ [ -e /conf/param.conf ]
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ local_premount_used=no
+ local_top_used=no
+ unset local_top_time
+ nfs_bottom
+ [ = yes ]
+ [ = yes ]
+ nfs_premount_used=no
+ nfs_top_used=no
+ local_bottom
+ [ no = yes ]
+ [ no = yes ]
+ local_premount_used=no
+ local_top_used=no
+ unset local_top_time
+ maybe_break bottom
+ [ n != y ]
+ log_begin_msg Running /scripts/init-bottom
+ _log_msg Begin: Running /scripts/init-bottom ...
+ [ n = y ]
+ printf Begin: Running /scripts/init-bottom ...
Begin: Running /scripts/init-bottom ... + run_scripts /scripts/init-bottom
+ initdir=/scripts/init-bottom
+ [ ! -d /scripts/init-bottom ]
+ shift
+ . /scripts/init-bottom/ORDER
+ /scripts/init-bottom/udev
+ PREREQS=
+ udevadm control --exit
+ mount -n -o move /dev /root/dev
mount: No such file or directory
+ mount -n --move /dev /root/dev
mount: invalid option --
+ [ -e /conf/param.conf ]
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ mount -n -o move /run /root/run
mount: No such file or directory
+ validate_init /sbin/init
+ run-init -n /root /sbin/init
run-init: current directory on the same filesystem as the root: error 0
+ echo Target filesystem doesn't have requested /sbin/init.
Target filesystem doesn't have requested /sbin/init.
+ init=
+ validate_init /sbin/init
+ run-init -n /root /sbin/init
run-init: current directory on the same filesystem as the root: error 0
+ validate_init /etc/init
+ run-init -n /root /etc/init
run-init: current directory on the same filesystem as the root: error 0
+ validate_init /bin/init
+ run-init -n /root /bin/init
run-init: current directory on the same filesystem as the root: error 0
+ validate_init /bin/sh
+ run-init -n /root /bin/sh
run-init: current directory on the same filesystem as the root: error 0
+ validate_init
+ run-init -n /root
run-init: current directory on the same filesystem as the root: error 0
+ panic No init found. Try passing init= bootarg.
+ local console rest
+ command -v chvt
+ echo No init found. Try passing init= bootarg.
No init found. Try passing init= bootarg.
+ [ -n ]
+ run_scripts /scripts/panic
+ initdir=/scripts/panic
+ [ ! -d /scripts/panic ]
+ return
+ command -v setsid
+ REASON=No init found. Try passing init= bootarg. PS1=(initramfs) sh -i
(initramfs) [ 120.580167] random: crng init done
[ 120.602054] random: 7 urandom warning(s) missed due to ratelimiting
U-Boot SPL 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:59:22)
Trying to boot from MMC1
U-Boot 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:59:22 +0200), Build: jenkins-u-boot-imx6-variant=sdhc-2
CPU: Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 51C
Reset cause: WDOG
Board: MX6 HummingBoard
Watchdog enabled
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
auto-detected panel HDMI
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
Net: FEC
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
297 bytes read in 122 ms (2 KiB/s)
i.MX6
1: default
2: hack
Enter choice: 1
1: default
Retrieving file: /boot/extlinux/../initrd
8817476 bytes read in 690 ms (12.2 MiB/s)
Retrieving file: /boot/extlinux/../zImage
7137904 bytes read in 529 ms (12.9 MiB/s)
append: root=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 rootfstype=ext4 rootwait
Retrieving file: /boot/extlinux/../dtb-dir/imx6q-hummingboard.dtb
45535 bytes read in 854 ms (51.8 KiB/s)
## Flattened Device Tree blob at 18000000
Booting using the fdt blob at 0x18000000
Using Device Tree in place at 18000000, end 1800e1de
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.124-imx6-sr (abuild@ddd2fcb3ed55) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Sat Sep 15 05:01:08 UTC 2018
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: SolidRun HummingBoard Dual/Quad
[ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 14 pages/cpu @db6ba000 s26764 r8192 d22388 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: root=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 686640K/1048576K available (9216K kernel code, 418K rwdata, 3088K rodata, 1024K init, 549K bss, 34256K reserved, 327680K cma-reserved, 262144K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB)
[ 0.000000] .init : 0xc0e00000 - 0xc0f00000 (1024 kB)
[ 0.000000] .data : 0xc0f00000 - 0xc0f68880 ( 419 kB)
[ 0.000000] .bss : 0xc0f68880 - 0xc0ff1dd8 ( 550 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C-310 errata 752271 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[ 0.000000] Switching to timer-based delay loop, resolution 333ns
[ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[ 0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[ 0.001261] Console: colour dummy device 80x30
[ 0.001791] console [tty0] enabled
[ 0.001821] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000)
[ 0.001858] pid_max: default: 32768 minimum: 301
[ 0.001967] Security Framework initialized
[ 0.001993] SELinux: Initializing.
[ 0.002092] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002120] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002903] CPU: Testing write buffer coherency: ok
[ 0.003266] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003353] Setting up static identity map for 0x10100000 - 0x10100058
[ 0.005660] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.005765] Brought up 2 CPUs
[ 0.005812] SMP: Total of 2 processors activated (12.00 BogoMIPS).
[ 0.005831] CPU: All CPU(s) started in SVC mode.
[ 0.006749] devtmpfs: initialized
[ 0.034825] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 253580
[ 0.035541] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.035958] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.036007] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.036210] atomic64_test: passed
[ 0.036237] pinctrl core: initialized pinctrl subsystem
[ 0.037299] NET: Registered protocol family 16
[ 0.044686] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.048589] cpuidle: using governor menu
[ 0.048747] CPU identified as i.MX6Q, silicon rev 1.5
[ 0.071384] No ATAGs?
[ 0.071423] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.071461] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.072297] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.073614] imx-gpc 20dc000.gpc: no fsl,ldo-bypass found!
[ 0.073763] imx-gpc 20dc000.gpc: Registered imx-gpc
[ 0.104468] mxs-dma 110000.dma-apbh: initialized
[ 0.106605] v_3v2: supplied by v_5v0
[ 0.106679] vcc_3v3: supplied by v_3v2
[ 0.106948] v_sd: supplied by v_3v2
[ 0.108005] v_usb2: supplied by v_5v0
[ 0.108483] v_usb1: supplied by v_5v0
[ 0.109233] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 29, base_baud = 5000000) is a IMX
[ 0.109284] Console IMX rounded baud rate from 114943 to 114900
[ 0.600172] console [ttymxc0] enabled
[ 0.604997] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 76, base_baud = 5000000) is a IMX
[ 0.613888] serial serial0: tty port ttymxc3 registered
[ 0.619491] vgaarb: loaded
[ 0.622989] SCSI subsystem initialized
[ 0.627253] usbcore: registered new interface driver usbfs
[ 0.632851] usbcore: registered new interface driver hub
[ 0.638272] usbcore: registered new device driver usb
[ 0.643517] 2000000.aips-bus:usbphy_nop1 supply vcc not found, using dummy regulator
[ 0.651457] 2000000.aips-bus:usbphy_nop2 supply vcc not found, using dummy regulator
[ 0.659858] imx-i2c 21a0000.i2c: stop-delay=0, inter-byte-delay=0
[ 0.666549] i2c i2c-0: IMX I2C adapter registered
[ 0.671310] i2c i2c-0: can't use DMA, using PIO instead.
[ 0.676995] imx-i2c 21a4000.i2c: stop-delay=0, inter-byte-delay=0
[ 0.683449] i2c i2c-1: IMX I2C adapter registered
[ 0.688206] i2c i2c-1: can't use DMA, using PIO instead.
[ 0.693734] imx-i2c 21a8000.i2c: stop-delay=0, inter-byte-delay=0
[ 0.700055] i2c i2c-2: IMX I2C adapter registered
[ 0.704808] i2c i2c-2: can't use DMA, using PIO instead.
[ 0.710283] media: Linux media interface: v0.10
[ 0.714898] Linux video capture interface: v2.00
[ 0.719661] pps_core: LinuxPPS API ver. 1 registered
[ 0.724664] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it>
[ 0.733878] PTP clock support registered
[ 0.741595] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.752592] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.761040] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
[ 0.767797] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
[ 0.775740] MIPI CSI2 driver module loaded
[ 0.779996] Advanced Linux Sound Architecture Driver Initialized.
[ 0.787213] NetLabel: Initializing
[ 0.790669] NetLabel: domain hash size = 128
[ 0.795057] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.800105] NetLabel: unlabeled traffic allowed by default
[ 0.806043] clocksource: Switched to clocksource mxc_timer1
[ 0.811812] VFS: Disk quotas dquot_6.6.0
[ 0.815846] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.834141] NET: Registered protocol family 2
[ 0.839253] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.846450] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.853098] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.859667] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.865682] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.872353] NET: Registered protocol family 1
[ 0.877365] RPC: Registered named UNIX socket transport module.
[ 0.883363] RPC: Registered udp transport module.
[ 0.888114] RPC: Registered tcp transport module.
[ 0.892861] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.899610] Trying to unpack rootfs image as initramfs...
[ 1.624690] Freeing initrd memory: 8612K
[ 1.629262] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 1.638908] Bus freq driver module loaded
[ 1.643916] audit: initializing netlink subsys (disabled)
[ 1.649459] audit: type=2000 audit(1.074:1): initialized
[ 1.655858] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.670594] NFS: Registering the id_resolver key type
[ 1.675747] Key type id_resolver registered
[ 1.679981] Key type id_legacy registered
[ 1.684054] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.691061] fuse init (API version 7.26)
[ 5.422821] NET: Registered protocol family 38
[ 5.427403] bounce: pool size: 64 pages
[ 5.431396] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 5.438987] io scheduler noop registered
[ 5.442974] io scheduler deadline registered
[ 5.447486] io scheduler cfq registered (default)
[ 5.453963] imx6_pcie_probe: reset gp 68
[ 5.458180] OF: PCI: host bridge /soc/pcie@0x01000000 ranges:
[ 5.463986] OF: PCI: No bus range found for /soc/pcie@0x01000000, using [bus 00-ff]
[ 5.471884] OF: PCI: IO 0x01f80000..0x01f8ffff -> 0x00000000
[ 5.477854] OF: PCI: MEM 0x01000000..0x01efffff -> 0x01000000
[ 5.733968] imx6q-pcie 1ffc000.pcie: phy link never came up
[ 5.739602] imx6q-pcie 1ffc000.pcie: Link never came up
[ 5.747082] imx6q-pcie 1ffc000.pcie: failed to initialize host
[ 5.753057] imx6q-pcie: probe of 1ffc000.pcie failed with error -110
[ 5.760637] 20e0000.hdmi_video supply HDMI not found, using dummy regulator
[ 5.768248] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[ 5.776148] fbcvt: 1920x1080@60: CVT Name - 2.073M9
[ 5.781170] mxc_sdc_fb fb@0: registered mxc display driver hdmi IPU1_DISP0
[ 5.788098] mxc_sdc_fb fb@0: registered mxc display driver hdmi
[ 5.932956] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
[ 5.933121] imx-ipuv3 2400000.ipu: try ipu internal clk
[ 5.940096] imx-ipuv3 2400000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1
[ 5.940105] find_field: [0] = 0x7ff, max=23
[ 5.940111] find_field: [1] = 0xfff, max=23
[ 5.940116] find_field: [2] = 0x17ff, max=23
[ 5.940120] find_field: [0] = 0x820, max=29
[ 5.940169] imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[ 5.990245] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
[ 5.990361] imx-ipuv3 2400000.ipu: try ipu internal clk
[ 5.997079] imx-ipuv3 2400000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1
[ 6.036131] Console: switching to colour frame buffer device 240x67
[ 6.113167] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.123393] [drm] Initialized
[ 6.126917] [drm] Initialized vivante 1.0.0 20120216 on minor 0
[ 6.147192] brd: module loaded
[ 6.150541] loop: module loaded
[ 6.154986] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1025, using 00000024
[ 6.162922] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 3330, using 00000480
[ 6.170936] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000
[ 6.178859] ahci-imx 2200000.sata: fsl,receive-eq-mdB value 3000, using 05000000
[ 6.190414] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[ 6.197663] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 6.206754] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
[ 6.218212] scsi host0: ahci-imx
[ 6.221919] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 83
[ 6.231667] libphy: Fixed MDIO Bus: probed
[ 6.236822] 2188000.ethernet supply phy not found, using dummy regulator
[ 6.247382] pps pps0: new PPS source ptp0
[ 6.261948] libphy: fec_enet_mii_bus: probed
[ 6.267002] fec 2188000.ethernet eth0: registered PHC device 0
[ 6.273595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.280362] ehci-pci: EHCI PCI platform driver
[ 6.285052] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.291495] ohci-pci: OHCI PCI platform driver
[ 6.296167] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.302978] usbcore: registered new interface driver usb-storage
[ 6.309246] usbcore: registered new interface driver ums-usbat
[ 6.315395] usbcore: registered new interface driver usbserial
[ 6.321478] usbcore: registered new interface driver usbserial_generic
[ 6.328270] usbserial: USB Serial support registered for generic
[ 6.344173] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
[ 6.361131] setup_reset_gpios:-2, flags 0
[ 6.378648] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 6.392571] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 6.417085] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 6.431372] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.446924] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.462987] usb usb1: Product: EHCI Host Controller
[ 6.476643] usb usb1: Manufacturer: Linux 4.9.124-imx6-sr ehci_hcd
[ 6.491694] usb usb1: SerialNumber: ci_hdrc.0
[ 6.505605] hub 1-0:1.0: USB hub found
[ 6.518221] hub 1-0:1.0: 1 port detected
[ 6.531484] setup_reset_gpios:-2, flags 0
[ 6.547535] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 6.561239] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 6.585073] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 6.599242] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.614742] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.630643] usb usb2: Product: EHCI Host Controller
[ 6.644099] usb usb2: Manufacturer: Linux 4.9.124-imx6-sr ehci_hcd
[ 6.658870] usb usb2: SerialNumber: ci_hdrc.1
[ 6.672582] hub 2-0:1.0: USB hub found
[ 6.684847] hub 2-0:1.0: 1 port detected
[ 6.698287] mousedev: PS/2 mouse device common for all mice
[ 6.712465] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.713828] rtc-pcf8523 0-0068: RTC reports battery is low
[ 6.713835] rtc-pcf8523 0-0068: starting calibration at 12.5 pf
[ 6.718794] rtc-pcf8523 0-0068: rtc core: registered rtc-pcf8523 as rtc0
[ 6.719210] check_alarm_past: alarm in the past
[ 6.719398] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
[ 6.719513] i2c /dev entries driver
[ 6.720074] IR Sharp protocol handler initialized
[ 6.720077] IR XMP protocol handler initialized
[ 6.720532] mxc_v4l2_output v4l2_out: V4L2 device registered as video16
[ 6.720697] mxc_v4l2_output v4l2_out: V4L2 device registered as video17
[ 6.722061] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
[ 6.722494] device-mapper: uevent: version 1.0.3
[ 6.722835] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-de...@redhat.com
[ 6.723794] sdhci: Secure Digital Host Controller Interface driver
[ 6.723797] sdhci: Copyright(c) Pierre Ossman
[ 6.723799] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.724754] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq
[ 6.965066] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
[ 6.966133] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
[ 7.000470] ata1.00: ATA-9: TS16GMSA370, 20140516, max UDMA/133
[ 7.006230] usb 2-1: new high-speed USB device number 2 using ci_hdrc
[ 7.006439] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[ 7.015854] mxc_vpu 2040000.vpu_fsl: VPU initialized
[ 7.016433] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[ 7.016870] HDMI-CEC initialized
[ 7.017921] caam 2100000.caam: ERA source: CAAMVID.
[ 7.017956] caam 2100000.caam: AXI pipeline throttling enabled.
[ 7.018864] caam 2100000.caam: Entropy delay = 3200
[ 7.079653] caam 2100000.caam: Instantiated RNG4 SH0
[ 7.140415] caam 2100000.caam: Instantiated RNG4 SH1
[ 7.140424] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
[ 7.140430] caam 2100000.caam: job rings = 2, qi = 0
[ 7.158833] alg: No test for authenc(hmac(sha224),ecb(cipher_null)) (authenc-hmac-sha224-ecb-cipher_null-caam)
[ 7.158982] alg: No test for authenc(hmac(sha256),ecb(cipher_null)) (authenc-hmac-sha256-ecb-cipher_null-caam)
[ 7.159174] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam)
[ 7.159354] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam)
[ 7.159744] random: fast init done
[ 7.161361] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam)
[ 7.161505] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
[ 7.161647] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam)
[ 7.164592] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam)
[ 7.164738] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
[ 7.164879] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam)
[ 7.165466] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam)
[ 7.166085] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam)
[ 7.166707] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam)
[ 7.166892] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
[ 7.167074] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam)
[ 7.167669] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam)
[ 7.168260] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam)
[ 7.168843] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam)
[ 7.169007] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 7.169181] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 7.169477] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam)
[ 7.169630] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 7.169781] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 7.170101] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam)
[ 7.170124] caam algorithms registered in /proc/crypto
[ 7.189120] caam_jr 2101000.jr0: registering rng-caam
[ 7.189821] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.190129] usbcore: registered new interface driver usbhid
[ 7.190132] usbhid: USB HID core driver
[ 7.193842] sgtl5000 0-000a: sgtl5000 revision 0x11
[ 7.195553] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1
[ 7.207931] usb 2-1: New USB device found, idVendor=04b4, idProduct=6570
[ 7.207940] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.207946] usb 2-1: Product: USB2.0 Hub
[ 7.208985] hub 2-1:1.0: USB hub found
[ 7.209416] hub 2-1:1.0: 4 ports detected
[ 7.210995] mmc0: host does not support reading read-only switch, assuming write-enable
[ 7.228660] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 7.287181] fsl-spdif-dai 2004000.spdif: imx_pcm_dma_init failed: -517
[ 7.292686] imx-sgtl5000 sound-sgtl5000: ASoC: CPU DAI (null) not registered
[ 7.292697] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[ 7.292959] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
[ 7.292966] imx-spdif sound-spdif: snd_soc_register_card failed: -517
[ 7.329832] mmc0: new ultra high speed DDR50 SDXC card at address 0001
[ 7.332690] mmcblk0: mmc0:0001 00000 59.6 GiB
[ 7.337646] imx-audio-hdmi sound-hdmi: hdmi-hifi.0 <-> soc:hdmi_audio@00120000 mapping ok
[ 7.340123] mmcblk0: p1
[ 7.353733] Initializing XFRM netlink socket
[ 7.357694] NET: Registered protocol family 10
[ 7.358836] mip6: Mobile IPv6
[ 7.358844] NET: Registered protocol family 17
[ 7.358900] 8021q: 802.1Q VLAN Support v1.8
[ 7.358952] Key type dns_resolver registered
[ 7.369367] cpu cpu0: Registered imx6q-cpufreq
[ 7.414496] registered taskstats version 1
[ 7.429177] Key type big_key registered
[ 7.441703] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C
[ 7.442207] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 7.442339] fsl-ssi-dai 2028000.ssi: Unbalanced pm_runtime_enable!
[ 7.485089] fsl-spdif-dai 2004000.spdif: Unbalanced pm_runtime_enable!
[ 7.485138] fsl-spdif-dai 2004000.spdif: imx_pcm_dma_init failed: -517
[ 7.485513] imx-sgtl5000 sound-sgtl5000: ASoC: CPU DAI (null) not registered
[ 7.485522] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[ 7.485706] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
[ 7.485712] imx-spdif sound-spdif: snd_soc_register_card failed: -517
[ 7.487740] rtc-pcf8523 0-0068: hctosys: unable to read the hardware clock
[ 7.574093] ALSA device list:
[ 7.574097] #0: imx-hdmi-soc
[ 8.232382] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 8.246893] ata1.00: configured for UDMA/133
[ 8.259183] scsi 0:0:0:0: Direct-Access ATA TS16GMSA370 0516 PQ: 0 ANSI: 5
[ 8.295622] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 8.310943] sd 0:0:0:0: [sda] Write Protect is off
[ 8.311068] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 8.311210] fsl-ssi-dai 2028000.ssi: Unbalanced pm_runtime_enable!
[ 8.351485] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.353221] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.354185] fsl-spdif-dai 2004000.spdif: Unbalanced pm_runtime_enable!
[ 8.354231] fsl-spdif-dai 2004000.spdif: imx_pcm_dma_init failed: -517
[ 8.354619] imx-sgtl5000 sound-sgtl5000: ASoC: CPU DAI (null) not registered
[ 8.354626] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[ 8.354811] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
[ 8.354817] imx-spdif sound-spdif: snd_soc_register_card failed: -517
[ 8.492209] mxc_edid_parse: Vertical blanking adjusted for 720x400p-70. Please check modedb!
[ 8.492683] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.519868] mxc_edid_parse: Vertical blanking adjusted for 640x480p-67. Please check modedb!
[ 8.535643] mxc_edid_parse: Vertical blanking adjusted for 640x480p-75. Please check modedb!
[ 8.551345] mxc_edid_parse: Vertical blanking adjusted for 800x600p-56. Please check modedb!
[ 8.566979] mxc_edid_parse: Vertical blanking adjusted for 800x600p-60. Please check modedb!
[ 8.582544] mxc_edid_parse: Vertical blanking adjusted for 800x600p-75. Please check modedb!
[ 8.598016] mxc_edid_parse: Vertical blanking adjusted for 832x624p-75. Please check modedb!
[ 8.613427] mxc_edid_parse: Vertical blanking adjusted for 1024x768p-75. Please check modedb!
[ 8.628920] mxc_edid_parse: Vertical blanking adjusted for 1280x1024p-75. Please check modedb!
[ 8.644431] mxc_edid_parse: Vertical blanking adjusted for 1152x864p-75. Please check modedb!
[ 8.659847] mxc_edid_parse: Vertical blanking adjusted for 1152x864p-75. Please check modedb!
[ 8.675157] mxc_edid_parse: Vertical blanking adjusted for 1280x800p-60. Please check modedb!
[ 8.690443] mxc_edid_parse: Vertical blanking adjusted for 1280x960p-60. Please check modedb!
[ 8.705712] mxc_edid_parse: Vertical blanking adjusted for 1280x1024p-60. Please check modedb!
[ 8.720984] mxc_edid_parse: Vertical blanking adjusted for 1440x900p-60. Please check modedb!
[ 8.736078] mxc_edid_parse: Vertical blanking adjusted for 1440x900p-75. Please check modedb!
[ 8.751063] mxc_edid_parse: Vertical blanking adjusted for 1600x1200p-60. Please check modedb!
[ 8.766082] mxc_edid_parse: Vertical blanking adjusted for 1680x1050p-60. Please check modedb!
[ 8.783608] Freeing unused kernel memory: 1024K
+ export PATH=/sbin:/usr/sbin:/bin:/usr/bin
+ [ -d /dev ]
+ [ -d /root ]
+ [ -d /sys ]
+ mkdir /sys
+ [ -d /proc ]
+ mkdir /proc
+ [ -d /tmp ]
+ mkdir /tmp
+ mkdir -p /var/lock
+ mount -t sysfs -o nodev,noexec,nosuid sysfs /sys
+ mount -t proc -o nodev,noexec,nosuid proc /proc
+ cat /proc/cmdline
+ quiet=n
+ echo Loading, please wait...
Loading, please wait...
+ export quiet
+ mount -t devtmpfs -o nosuid,mode=0755 udev /dev
+ mkdir /dev/pts
+ mount -t devpts -o noexec,nosuid,gid=5,mode=0620 devpts /dev/pts
+ mount -t tmpfs -o noexec,nosuid,size=10%,mode=0755 tmpfs /run
+ mkdir -m 0755 /run/initramfs
+ export DPKG_ARCH=
+ . /conf/arch.conf
+ DPKG_ARCH=armhf
+ export MODPROBE_OPTIONS=-qb
+ export ROOT=
+ export ROOTDELAY=
+ export ROOTFLAGS=
+ export ROOTFSTYPE=
+ export IP=
+ export BOOT=
+ export BOOTIF=
+ export UBIMTD=
+ export break=
+ export init=/sbin/init
+ export readonly=y
+ export rootmnt=/root
+ export debug=
+ export panic=
+ export blacklist=
+ export resume=
+ export resume_offset=
+ export drop_caps=
+ export fastboot=n
+ export forcefsck=n
+ export fsckfix=
+ . /conf/initramfs.conf
+ MODULES=most
+ BUSYBOX=auto
+ KEYMAP=n
+ COMPRESS=gzip
+ DEVICE=
+ NFSROOT=auto
[ 8.861192] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
+ [ -f conf/conf.d/* ]
+ . /scripts/functions
+ cat /proc/cmdline
+ ROOT=UUID=febfadf2-ffa2-48[ 8.861371] imx-ipuv3 2400000.ipu: try ipu internal clk
ad-9802-d7b67b5e7818
+ [ -z ]
+ [ UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 = /dev/nfs ]
+ RO[ 8.868088] imx-ipuv3 2400000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1
OTFSTYPE=ext4
+ [ -z ]
+ BOOT=local
+ [ -n ]
+ [ = none ]
+ resume=
+ maybe_break top
+[ 8.886676] random: udevadm: uninitialized urandom read (16 bytes read)
run_scripts /scripts/init-top
+ initdir=/scripts/init-top
+ [ ! -d /scripts/init-top ]
+ shif[ 8.888435] random: udevadm: uninitialized urandom read (16 bytes read)
t
+ . /scripts/init-top/ORDER
+ /scripts/init-top/all_generic_ide
+ [ -e /conf/param.conf ]
+[ 8.888497] random: udevadm: uninitialized urandom read (16 bytes read)
/scripts/init-top/blacklist
+ [ -e /conf/param.conf ]
+ /scripts/init-top/keymap
+ [ -e /conf/param.conf ]
+ /scripts/init-top/udev
starting version 232
[ 9.190764] imx-sdma 20ec000.sdma: no iram assigned, using external mem
[ 9.214341] imx-sdma 20ec000.sdma: loaded firmware 3.3
[ 9.248816] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 9.267326] fsl-ssi-dai 2028000.ssi: Unbalanced pm_runtime_enable!
[ 9.352532] fsl-spdif-dai 2004000.spdif: Unbalanced pm_runtime_enable!
[ 9.389973] alloc_contig_range: [2c0a0, 2c0b0) PFNs busy
[ 9.406528] imx-sgtl5000 sound-sgtl5000: sgtl5000 <-> 2028000.ssi mapping ok
[ 9.429490] alloc_contig_range: [2c0a0, 2c0b0) PFNs busy
[ 9.446489] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
[ 9.467670] spi_imx 200c000.ecspi: probed
+ [ -e /conf/param.conf ]
+ maybe_break modules
+ [ n != y ]
+ log_begin_msg Loading essential drivers
+ _log_msg Begin: Loading essential drivers ...
+ [ n = y ]
+ printf Begin: Loading essential drivers ...
Begin: Loading essential drivers ... + [ -n ]
+ load_modules
+ [ -e /conf/modules ]
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ [ ]
+ maybe_break premount
+ [ n != y ]
+ log_begin_msg Running /scripts/init-premount
+ _log_msg Begin: Running /scripts/init-premount ...
+ [ n = y ]
+ printf Begin: Running /scripts/init-premount ...
Begin: Running /scripts/init-premount ... + run_scripts /scripts/init-premount
+ initdir=/scripts/init-premount
+ [ ! -d /scripts/init-premount ]
+ return
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ maybe_break mount
+ log_begin_msg Mounting root file system
+ _log_msg Begin: Mounting root file system ...
+ [ n = y ]
+ printf Begin: Mounting root file system ...
Begin: Mounting root file system ... + . /scripts/local
+ . /scripts/nfs
+ . /scripts/local
+ parse_numeric UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ return
+ maybe_break mountroot
+ mount_top
+ local_top
+ [ != yes ]
+ [ n != y ]
+ log_begin_msg Running /scripts/local-top
+ _log_msg Begin: Running /scripts/local-top ...
+ [ n = y ]
+ printf Begin: Running /scripts/local-top ...
Begin: Running /scripts/local-top ... + run_scripts /scripts/local-top
+ initdir=/scripts/local-top
+ [ ! -d /scripts/local-top ]
+ return
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ local_top_used=yes
+ [ -z ]
+ cat /proc/uptime
+ local_top_time=8.96 8.06
+ local_top_time=8
+ local_top_time=9
+ export local_top_time
+ mount_premount
+ local_premount
+ [ != yes ]
+ [ n != y ]
+ log_begin_msg Running /scripts/local-premount
+ _log_msg Begin: Running /scripts/local-premount ...
+ [ n = y ]
+ printf Begin: Running /scripts/local-premount ...
Begin: Running /scripts/local-premount ... + run_scripts /scripts/local-premount
+ initdir=/scripts/local-premount
+ [ ! -d /scripts/local-premount ]
+ shift
+ . /scripts/local-premount/ORDER
+ /scripts/local-premount/ntfs_3g
+ [ -e /conf/param.conf ]
+ /scripts/local-premount/resume
+ [ -e /conf/param.conf ]
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ local_premount_used=yes
+ mountroot
+ local_mount_root
+ local_top
+ [ yes != yes ]
+ local_top_used=yes
+ [ -z 9 ]
+ local_device_setup UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 root file system
+ local dev_id=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ local name=root file system
+ local may_panic=true
+ local real_dev
+ local time_elapsed
+ local count
+ wait_for_udev 10
+ command -v udevadm
+ udevadm settle --timeout=10
+ [ -n ]
+ [ UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 = UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 ]
+ [ febfadf2-ffa2-48ad-9802-d7b67b5e7818 = UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 ]
+ resolve_device UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ DEV=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ blkid -l -t UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 -o device
+ DEV=/dev/mmcblk0p1
+ [ -e /dev/mmcblk0p1 ]
+ echo /dev/mmcblk0p1
+ real_dev=/dev/mmcblk0p1
+ get_fstype /dev/mmcblk0p1
+ local FS FSTYPE FSSIZE RET
+ FS=/dev/mmcblk0p1
+ FSTYPE=unknown
+ fstype /dev/mmcblk0p1
+ eval FSTYPE=ext4 FSSIZE=64030244864
+ FSTYPE=ext4 FSSIZE=64030244864
+ [ ext4 = unknown ]
+ RET=0
+ [ -z ext4 ]
+ echo ext4
+ return 0
+ resolve_device UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ DEV=UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818
+ blkid -l -t UUID=febfadf2-ffa2-48ad-9802-d7b67b5e7818 -o device
+ DEV=/dev/mmcblk0p1
+ [ -e /dev/mmcblk0p1 ]
+ echo /dev/mmcblk0p1
+ real_dev=/dev/mmcblk0p1
+ get_fstype /dev/mmcblk0p1
+ local FS FSTYPE FSSIZE RET
+ FS=/dev/mmcblk0p1
+ FSTYPE=unknown
+ fstype /dev/mmcblk0p1
+ eval FSTYPE=ext4 FSSIZE=64030244864
+ FSTYPE=ext4 FSSIZE=64030244864
+ [ ext4 = unknown ]
+ RET=0
+ [ -z ext4 ]
+ echo ext4
+ return 0
+ DEV=/dev/mmcblk0p1
+ ROOT=/dev/mmcblk0p1
+ [ -z ext4 ]
+ FSTYPE=ext4
+ local_premount
+ [ yes != yes ]
+ local_premount_used=yes
+ [ y = y ]
+ roflag=-r
+ modprobe ext4
+ checkfs /dev/mmcblk0p1 root ext4
+ _checkfs_once /dev/mmcblk0p1 root ext4
+ DEV=/dev/mmcblk0p1
+ NAME=root
+ TYPE=ext4
+ [ root = / ]
+ FSCK_LOGFILE=/run/initramfs/fsck.log
+ FSCK_STAMPFILE=/run/initramfs/fsck-root
+ [ ext4 = auto ]
+ FSCKCODE=0
+ command -v fsck
+ log_warning_msg fsck not present, so skipping root file system
+ _log_msg Warning: fsck not present, so skipping root file system\n
+ [ n = y ]
+ printf Warning: fsck not present, so skipping root file system\n
Warning: fsck not present, so skipping root file system
+ return
+ [ ext4 != unknown ]
+ mount -r -t ext4 /dev/mmcblk0p1 /root
[ 9.979060] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ read_fstab_entry /usr
+ found=1
+ [ -f /root/etc/fstab ]
+ read MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
+ [ / = /usr ]
+ read MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
+ return 1
+ mount_bottom
+ local_bottom
+ [ yes = yes ]
+ [ n != y ]
+ log_begin_msg Running /scripts/local-bottom
+ _log_msg Begin: Running /scripts/local-bottom ...
+ [ n = y ]
+ printf Begin: Running /scripts/local-bottom ...
Begin: Running /scripts/local-bottom ... + run_scripts /scripts/local-bottom
+ initdir=/scripts/local-bottom
+ [ ! -d /scripts/local-bottom ]
+ shift
+ . /scripts/local-bottom/ORDER
+ /scripts/local-bottom/ntfs_3g
+ [ -e /conf/param.conf ]
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ local_premount_used=no
+ local_top_used=no
+ unset local_top_time
+ nfs_bottom
+ [ = yes ]
+ [ = yes ]
+ nfs_premount_used=no
+ nfs_top_used=no
+ local_bottom
+ [ no = yes ]
+ [ no = yes ]
+ local_premount_used=no
+ local_top_used=no
+ unset local_top_time
+ maybe_break bottom
+ [ n != y ]
+ log_begin_msg Running /scripts/init-bottom
+ _log_msg Begin: Running /scripts/init-bottom ...
+ [ n = y ]
+ printf Begin: Running /scripts/init-bottom ...
Begin: Running /scripts/init-bottom ... + run_scripts /scripts/init-bottom
+ initdir=/scripts/init-bottom
+ [ ! -d /scripts/init-bottom ]
+ shift
+ . /scripts/init-bottom/ORDER
+ /scripts/init-bottom/udev
+ PREREQS=
+ udevadm control --exit
+ mount -n -o move /dev /root/dev
+ command -v nuke
+ nuke /dev
+ ln -s /root/dev /dev
+ [ -e /conf/param.conf ]
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ mount -n -o move /run /root/run
+ validate_init /sbin/init
+ run-init -n /root /sbin/init
+ validate_init /sbin/init
+ run-init -n /root /sbin/init
+ maybe_break init
+ unset debug
+ unset MODPROBE_OPTIONS
+ unset DPKG_ARCH
+ unset ROOTFLAGS
+ unset ROOTFSTYPE
+ unset ROOTDELAY
+ unset ROOT
+ unset IP
+ unset BOOT
+ unset BOOTIF
+ unset UBIMTD
+ unset blacklist
+ unset break
+ unset noresume
+ unset panic
+ unset quiet
+ unset readonly
+ unset resume
+ unset resume_offset
+ unset fastboot
+ unset forcefsck
+ unset fsckfix
+ mount -n -o move /sys /root/sys
+ mount -n -o move /proc /root/proc
+ exec run-init /root /sbin/init
SELinux: Could not open policy f[ 10.400179] systemd[1]: System time before build time, advancing clock.
ile <= /etc/selinux/targeted/policy/policy.30: No such file or directory
[ 10.458266] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.497266] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 10.525644] systemd[1]: Detected architecture arm.
Welcome to Debian GNU/Linux 9 (stretch)!
[ 10.547816] systemd[1]: Set hostname to <sr-imx6>.
[ 10.898234] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 10.922642] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 10.945495] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 10.973260] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 10.996131] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executabâ¦rmats File System Automount Point.
[ 11.025894] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 11.045763] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on Syslog Socket.
[ OK ] Reached target Swap.
Mounting Debug File System...
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Listening on Journal Socket.
Starting Journal Service...
Starting Load Kernel Modules...
Starting Remount Root and Kernel File Systems...
Starting Create list of required stâ¦ce nodes for the current kernel...
[ OK ] Reached target Paths.
Mounting POSIX Message Queue File System...
[ OK ] Created slice system-getty.slice.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on u[ 11.254894] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
dev Control Socket.
[ OK ] Mounted Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Create list of required staâ¦vice nodes for the current kernel.
Starting Create Static Device Nodes in /dev...
Starting udev Coldplug all Devices...
Starting Load/Save Random Seed...
Mounting FUSE Control File System...
Mounting Configuration File System...
Starting Apply Kernel Variables...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Configuration File System.
[ OK ] Started Journal Service.
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Apply Kernel Variables.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Raise network interfaces...
Starting udev Kernel Device Manager...
Starting Flush Journal to Persistent Storage...
[ 11.680619] systemd-journald[265]: Received request to flush runtime journal from PID 1
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting System Logging Service...
Starting Execute Run-Once Apps...
Starting DUN service...
[ OK ] Started Regular background program processing daemon.
Starting Telephony service...
Starting LSB: Load broadcom bluetooth firmware...
Starting Login Service...
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started Telephony service.
[ OK ] Started DUN service.
Starting Connection service...
Starting Save/Restore Sound Card State...
[ OK ] Reached target System Time Synchronized.
[ 12.545703] Bluetooth: Core ver 2.22
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Reached target Timers.
[ 12.585469] NET: Registered protocol family 31
[ 12.589082] Registered IR keymap rc-rc6-mce
[ 12.589410] input: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc0/input1
[ 12.624892] Bluetooth: HCI device and connection manager initialized
[ 12.634295] Bluetooth: HCI socket layer initialized
[ 12.634305] Bluetooth: L2CAP socket layer initialized
[ 12.634341] Bluetooth: SCO socket layer initialized
[ 12.649093] rc rc0: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc0
[ OK ] Started System Logging Service.
[ OK ] Started Execute Run-Once Apps.
[[ 12.738734] lirc_dev: IR Remote Control driver registered, major 240
OK [ 12.753839] IR RC6 protocol handler initialized
] Started LSB: Load broadcom bluetooth firmware.
[ 12.778447] Galcore version 6.2.2.93313
[ 12.798191] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
[ 12.832014] IR LIRC bridge handler initialized
[ OK ] Started Save/Restore Sound Card State.
[ OK ] Found device /dev/ttymxc0.
[ OK ] Started Login Service.
[ OK ] Started Raise network interfaces.
[ OK ] Started Connection service.
[ OK ] Reached target Network.
Starting Permit User Sessions...
Starting OpenBSD Secure Shell server...
[ OK ] Started Permit User Sessions.
[ OK ] Started Serial Getty on ttymxc0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ 13.355505] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Reached target Multi-User System.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
[ 14.087071] Atheros 8035 ethernet 2188000.ethernet-1:00: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=-1)
[ 14.124843] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.201115] ov5647_read_reg(mipi):reg=300a ret=-11
[ 14.206092] camera ov5647_mipi is not found
[ 14.255616] Bluetooth: HCI UART driver ver 2.3
[ 14.260255] Bluetooth: HCI UART protocol H4 registered
[ 14.265626] Bluetooth: HCI UART protocol BCSP registered
[ 14.351253] Bluetooth: HCI UART protocol LL registered
[ 14.356635] Bluetooth: HCI UART protocol ATH3K registered
[ 14.362254] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 14.439218] Bluetooth: HCI UART protocol Broadcom registered
[ 14.486599] alloc_contig_range: [36100, 36900) PFNs busy
[ 14.545336] V4L2 device 'Mxc Camera' on IPU1_CSI1 registered as video0
[ 14.790960] mxc_v4l_open: Mxc Camera no sensor ipu0/csi1
[ 14.896694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.902216] Bluetooth: BNEP filters: protocol multicast
[ 14.908446] Bluetooth: BNEP socket layer initialized
Debian GNU/Linux 9 sr-imx6 ttymxc0
sr-imx6 login: [ 16.478127] Bluetooth: hci0: command 0xfc18 tx timeout
[ 17.182851] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 17.191114] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
