On 2020-03-08, Bernhard wrote: > I had an additional look for the possible problem with the AXP813 for > BananaPi M3 in U-Boot. > With help of Google, i found a patchset for U-Boot from 2016: > > https://lists.denx.de/pipermail/u-boot/2016-January/240259.html > >> +++ b/configs/Bananapi_m3_defconfig >> @@ -0,0 +1,25 @@ >> +CONFIG_ARM=y >> +CONFIG_ARCH_SUNXI=y >> +CONFIG_MACH_SUN8I_A83T=y >> +CONFIG_DRAM_CLK=480 >> +CONFIG_DRAM_ZQ=15355 >> +CONFIG_DRAM_ODT_EN=y >> +CONFIG_SYS_EXTRA_OPTIONS="DRAM_TYPE=7" >> +#CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" >> +#CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" >> +CONFIG_AXP_GPIO=y >> +#CONFIG_USB_MUSB_HOST=y >> +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3-v1.2" >> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set >> +CONFIG_SPL=y >> +# CONFIG_CMD_IMLS is not set >> +# CONFIG_CMD_FLASH is not set >> +# CONFIG_CMD_FPGA is not set >> +CONFIG_AXP_DCDC1_VOLT=3000 >> +CONFIG_AXP_DCDC2_VOLT=900 >> +CONFIG_AXP_DCDC3_VOLT=900 >> +CONFIG_AXP_DCDC4_VOLT=0 >> +CONFIG_AXP_DCDC5_VOLT=1200 >> +CONFIG_AXP_ALDO2_VOLT=0 >> +CONFIG_AXP_ALDO3_VOLT=0 >> +CONFIG_AXP_DLDO4_VOLT=0 >> -- > > In the Debian configuration, i found the following: > >> CONFIG_ARM=y >> CONFIG_ARCH_SUNXI=y >> CONFIG_NR_DRAM_BANKS=1 >> CONFIG_SPL=y >> CONFIG_MACH_SUN8I_A83T=y >> CONFIG_DRAM_TYPE=7 >> CONFIG_DRAM_CLK=480 >> CONFIG_DRAM_ZQ=15355 >> CONFIG_DRAM_ODT_EN=y >> CONFIG_MMC_SUNXI_SLOT_EXTRA=2 >> CONFIG_INITIAL_USB_SCAN_DELAY=500 >> CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" >> CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" >> CONFIG_USB0_ID_DET="PH11" >> CONFIG_USB1_VBUS_PIN="PD24" >> CONFIG_AXP_GPIO=y >> CONFIG_SATAPWR="PD25" >> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set >> CONFIG_USE_PREBOOT=y >> CONFIG_CONSOLE_MUX=y >> # CONFIG_SPL_DOS_PARTITION is not set >> # CONFIG_SPL_EFI_PARTITION is not set >> CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3" >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y >> CONFIG_PHY_REALTEK=y >> CONFIG_SUN8I_EMAC=y >> CONFIG_AXP_DCDC5_VOLT=1200 >> CONFIG_AXP_DLDO3_VOLT=3300 >> CONFIG_AXP_SW_ON=y >> CONFIG_USB_EHCI_HCD=y >> CONFIG_USB_OHCI_HCD=y >> CONFIG_USB_MUSB_HOST=y >> CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
I presume this is configs/Sinovoip_BPI_M3_defconfig ? > Some CONFIG_AXP_... are missing in the Debian configuration. > Is it possible, that these missing AXP-configs have to be added in the Debian > configuration? > > If i can do some tests, please let me know. Debian doesn't have any patches that should affect this; CCing upstream. Hopefully someone there has some suggestions or ideas. live well, vagrant
signature.asc
Description: PGP signature
