Subject: linux-source-2.6.16: inconsistent device detetion: eth0<=>eth1 Package: linux-source-2.6.16 Version: 2.6.16-2 Severity: normal
I have two ethernet cards on my box, an onboard SiS and a pci ne-2k compatible. When I boot the system, sometimes the SiS is detected as eth0 and the pci as eth1, and sometimes the SiS is eth1 and the pci eth0, *without my changing anything*. I just reboot and it's different. This is a big pain in the butt, because I have dhcp on the SiS connection and a separate internal net with fixed address on the pci card, and config in /etc/network/interfaces is based upon specifying eth?. This means that half the time when I boot, the networks don't work and I have to keep editing /etc/network/interfaces and restarting the interfaces. Attached are two dmesg outputs with the corresponding detections. Run a diff on them. -j -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages linux-source-2.6.16 depends on: ii binutils 2.16.1cvs20060117-1 The GNU assembler, linker and bina ii bzip2 1.0.2-7 high-quality block-sorting file co Versions of packages linux-source-2.6.16 recommends: ii gcc 4:4.0.2-1 The GNU C compiler ii libc6-dev [libc-dev] 2.3.6-3 GNU C Library: Development Librari ii make 3.80+3.81.rc2-1 The GNU version of the "make" util -- no debconf information
Linux version 2.6.16 (Version: spleen.060402.2) ([EMAIL PROTECTED]) (gcc version 4.0.3 20051201 (prerelease) (Debian 4.0.2-5)) #1 Sun Apr 2 21:13:53 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data) BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 767MB LOWMEM available. On node 0 totalpages: 196592 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 192496 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa340 ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x2fff0000 ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x2fff0030 ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000) Built 1 zonelists Kernel command line: root=/dev/hda6 ro vga=0x030c pci=routeirq Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1526.957 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 132x60 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 776572k/786368k available (1590k kernel code, 9312k reserved, 449k data, 124k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3056.64 BogoMIPS (lpj=6113294) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1800+ stepping 02 Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 1c20) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS18 that hid as a SIS503 (compatible=1) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15) PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt 0000:00:0b.0[B] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt 0000:00:0b.1[C] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0b.2[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 ACPI: PCI Interrupt 0000:00:0b.3[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: cdd00000-cfdfffff PREFETCH window: bda00000-cdbfffff Machine check exception polling timer started. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected SiS 735 chipset agpgart: AGP aperture is 64M @ 0xd0000000 serio: i8042 KBD port at 0x60,0x64 irq 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS735 ATA 100 (2nd gen) controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: IC35L040AVVN07-0, ATA DISK drive hdb: WDC WD205AA, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive hdd: AOPEN CD-RW CRW3248 1.09 20020207, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 SiI680: IDE controller at PCI slot 0000:00:0d.0 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 SiI680: chipset revision 2 SiI680: BASE CLOCK == 133 SiI680: 100% native mode on irq 5 ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: ST3120026A, ATA DISK drive ide2 at 0xf080ef80-0xf080ef87,0xf080ef8a on irq 5 Probing IDE interface ide3... Probing IDE interface ide3... hda: max request size: 128KiB hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > hda2 hdb: max request size: 128KiB hdb: 40079088 sectors (20520 MB) w/2048KiB Cache, CHS=39761/16/63, UDMA(66) hdb: cache flushes not supported hdb: hdb1 hde: max request size: 64KiB hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hde: cache flushes supported hde: hde1 hde2 < hde5 hde6 > mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: PCI0 PS2K UAR1 UAR2 USB1 USB2 LAN MDM AUD SLPB ACPI: (supports S0 S1 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 124k freed usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ohci_hcd 0000:00:02.2: OHCI Host Controller ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.2: irq 12, io mem 0xcfffd000 hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, DMA usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:02.3: OHCI Host Controller ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.3: irq 10, io mem 0xcfffe000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:0b.0[B] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0b.0: irq 5, io mem 0xcfff9000 usb 1-1: new low speed USB device using ohci_hcd and address 2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:0b.1[C] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ohci_hcd 0000:00:0b.1: OHCI Host Controller ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:0b.1: irq 12, io mem 0xcfffa000 usb 1-1: configuration #1 chosen from 1 choice usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:0b.2[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:0b.2: OHCI Host Controller ohci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:0b.2: irq 11, io mem 0xcfffb000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:0b.3[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 ehci_hcd 0000:00:0b.3: EHCI Host Controller ehci_hcd 0000:00:0b.3: debug port 1 ehci_hcd 0000:00:0b.3: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:0b.3: irq 12, io mem 0xcffffe00 ehci_hcd 0000:00:0b.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 6 ports detected sis900.c: v1.08.09 Sep. 19 2005 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5 0000:00:03.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:03.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xc000, IRQ 5, 00:07:95:fc:94:89. ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 eth1: RealTek RTL-8029 found at 0xbc00, IRQ 12, 00:00:1C:08:8C:BC. ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 intel8x0_measure_ac97_clock: measured 52866 usecs intel8x0: clocking to 48000 input: Microsoft Basic Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Adding 979924k swap on /dev/hda10. Priority:-1 extents:1 across:979924k EXT3 FS on hda6, internal journal parport0: PC-style at 0x378 [PCSPP(,...)] lp0: using parport0 (polling). nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda11, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hde5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda12, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2006 Netfilter Core Team ip_conntrack version 2.4 (6143 buckets, 49144 max) - 212 bytes per conntrack eth0: Media Link On 100mbps full-duplex agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Linux version 2.6.16 (Version: spleen.060402.2) ([EMAIL PROTECTED]) (gcc version 4.0.3 20051201 (prerelease) (Debian 4.0.2-5)) #1 Sun Apr 2 21:13:53 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data) BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 767MB LOWMEM available. On node 0 totalpages: 196592 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 192496 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa340 ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x2fff0000 ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x2fff0030 ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000) Built 1 zonelists Kernel command line: root=/dev/hda6 ro vga=0x030c pci=routeirq Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1527.108 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 132x60 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 776572k/786368k available (1590k kernel code, 9312k reserved, 449k data, 124k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3056.62 BogoMIPS (lpj=6113248) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1800+ stepping 02 Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 1c20) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS18 that hid as a SIS503 (compatible=1) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15) PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt 0000:00:0b.0[B] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt 0000:00:0b.1[C] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0b.2[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 ACPI: PCI Interrupt 0000:00:0b.3[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: cdd00000-cfdfffff PREFETCH window: bda00000-cdbfffff Machine check exception polling timer started. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected SiS 735 chipset agpgart: AGP aperture is 64M @ 0xd0000000 serio: i8042 KBD port at 0x60,0x64 irq 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS735 ATA 100 (2nd gen) controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: IC35L040AVVN07-0, ATA DISK drive hdb: WDC WD205AA, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive hdd: AOPEN CD-RW CRW3248 1.09 20020207, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 SiI680: IDE controller at PCI slot 0000:00:0d.0 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 SiI680: chipset revision 2 SiI680: BASE CLOCK == 133 SiI680: 100% native mode on irq 5 ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: ST3120026A, ATA DISK drive ide2 at 0xf080ef80-0xf080ef87,0xf080ef8a on irq 5 Probing IDE interface ide3... Probing IDE interface ide3... hda: max request size: 128KiB hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > hda2 hdb: max request size: 128KiB hdb: 40079088 sectors (20520 MB) w/2048KiB Cache, CHS=39761/16/63, UDMA(66) hdb: cache flushes not supported hdb: hdb1 hde: max request size: 64KiB hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hde: cache flushes supported hde: hde1 hde2 < hde5 hde6 > mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: PCI0 PS2K UAR1 UAR2 USB1 USB2 LAN MDM AUD SLPB ACPI: (supports S0 S1 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 124k freed ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 eth0: RealTek RTL-8029 found at 0xbc00, IRQ 12, 00:00:1C:08:8C:BC. usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ohci_hcd 0000:00:02.2: OHCI Host Controller ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.2: irq 12, io mem 0xcfffd000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, DMA ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:02.3: OHCI Host Controller ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.3: irq 10, io mem 0xcfffe000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:0b.0[B] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0b.0: irq 5, io mem 0xcfff9000 usb 1-1: new low speed USB device using ohci_hcd and address 2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:0b.1[C] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ohci_hcd 0000:00:0b.1: OHCI Host Controller ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:0b.1: irq 12, io mem 0xcfffa000 usb 1-1: configuration #1 chosen from 1 choice usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:0b.2[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:0b.2: OHCI Host Controller ohci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:0b.2: irq 11, io mem 0xcfffb000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:0b.3[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 ehci_hcd 0000:00:0b.3: EHCI Host Controller ehci_hcd 0000:00:0b.3: debug port 1 ehci_hcd 0000:00:0b.3: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:0b.3: irq 12, io mem 0xcffffe00 ehci_hcd 0000:00:0b.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 intel8x0_measure_ac97_clock: measured 52880 usecs intel8x0: clocking to 48000 sis900.c: v1.08.09 Sep. 19 2005 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5 0000:00:03.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:03.0: Using transceiver found at address 1 as default eth1: SiS 900 PCI Fast Ethernet at 0xc000, IRQ 5, 00:07:95:fc:94:89. input: Microsoft Basic Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Adding 979924k swap on /dev/hda10. Priority:-1 extents:1 across:979924k EXT3 FS on hda6, internal journal parport0: PC-style at 0x378 [PCSPP(,...)] lp0: using parport0 (polling). nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda11, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hde5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda12, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2006 Netfilter Core Team ip_conntrack version 2.4 (6143 buckets, 49144 max) - 212 bytes per conntrack agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode