Package: hplip
Version: 3.20.9+dfsg0-4
Severity: important
Dear Maintainer,
The hplip package was update in testing from 3.20.5+dfsg0-3+b1 to 3.20.9+dfsg0-4
After which I'm no longer able to install my network HP LaserJet MFP
M148 printer.
Installing the printer using hp-setup -i fails with the following:
hp-setup -i -a -x 192.168.89.196
HP Linux Imaging and Printing System (ver. 3.20.9)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ----------
----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or
JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ? 1
Using connection type: net
error: No device selected/specified or that supports this functionality.
I can print to the printer using the KDE cups connection:
implicitclass://HP_LaserJet_Pro_M148fdw_E27AD3_/
Thank you,
Andrew
-- Package-specific info:
Saving output in log file: /home/andrew/Downloads/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.9)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling
the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-testing version is not supported. Using debian-10.4 versions
dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.9.0-3-amd64 #1 SMP Debian 5.9.9-1 (2020-11-19) GNU/Linux
Host: workhorse
Proc: 5.9.0-3-amd64 #1 SMP Debian 5.9.9-1 (2020-11-19) GNU/Linux
Distribution: debian testing
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.9
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian
distro testing version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.9
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.9
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.20.9
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 12/01/20 17:00:07
version = 3.20.9
[last_used]
device_uri = "hp:/net/HP_LaserJet_Pro_M148f-M149f?ip=192.168.89.196"
printer_name = HP_LaserJet_Pro_M148f-M149f
working_dir = /home/andrew/Documents/Downloads/hplip-3.19.1-plugin.run
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = true
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1521572661
notify_upgrade = false
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version>
<Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System
REQUIRED 1.1 - INCOMPAT 'CUPS may not be
installed or not running'
gs GhostScript - PostScript and PDF language interpreter and
previewer REQUIRED 7.05 9.52 OK -
xsane xsane - Graphical scanner frontend for SANE
OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program
OPTIONAL 1.0 1.0.31 OK -
error: dbus DBus - Message bus system
REQUIRED - 1.12.20 MISSING 'DBUS may not be
installed or not running'
policykit PolicyKit - Administrative policy framework
OPTIONAL - 0.105 OK -
network network -wget
OPTIONAL - 1.20.3 OK -
error: avahi-utils avahi-utils
OPTIONAL - - MISSING 'avahi-utils
needs to be installed'
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library
REQUIRED - - MISSING 'libjpeg needs to
be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files
REQUIRED - - MISSING 'cups-devel needs
to be installed'
error: cups-image CUPS image - CUPS image development files
REQUIRED - - MISSING 'cups-image needs
to be installed'
libpthread libpthread - POSIX threads library
REQUIRED - b'2.31' OK -
error: libusb libusb - USB library
REQUIRED - 1.0 MISSING 'libusb needs to
be installed'
sane SANE - Scanning library
REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files
REQUIRED - - MISSING 'sane-devel needs
to be installed'
error: libavahi-dev libavahi-dev
REQUIRED - - MISSING 'libavahi-dev
needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development
files REQUIRED 5.0.9 - MISSING
'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library
REQUIRED - 1.1.1 MISSING 'libcrypto needs
to be installed'
python3X Python 2.2 or greater - Python programming language
REQUIRED 2.2 3.8.6 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify
Desktop notifications OPTIONAL - - OK
-
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4
OPTIONAL 4.0 - MISSING
'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)
REQUIRED 4.0 - MISSING 'python3-pyqt4
needs to be installed'
python3-dbus Python DBus - Python bindings for DBus
REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries
REQUIRED - 2.2.10 OK -
error: python3-devel Python devel - Python development files
REQUIRED 2.2 3.8.6 MISSING 'python3-devel
needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline
scanning with hp-scan) OPTIONAL - 8.0.1 OK
-
python3-reportlab Reportlab - PDF library for Python
OPTIONAL 2.0 3.5.55 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services
REQUIRED - - MISSING 'libtool needs to
be installed'
gcc gcc - GNU Project C and C++ Compiler
REQUIRED - 10.2.0 OK -
make make - GNU make utility to maintain groups of programs
REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension
REQUIRED - 3.20.9 OK -
hpmudext IO-Extension
REQUIRED - 3.20.9 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend
REQUIRED - 3.20.9 OK 'hpaio found in
/etc/sane.d/dll.conf'
scanext Scan-SANE-Extension
REQUIRED - 3.20.9 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `escl:https://192.168.89.196:443' is a HP LaserJet Pro M148fdw (E27AD3)
flatbed scanner
device `hpaio:/net/hp_laserjet_pro_m148f-m149f?ip=192.168.89.196&queue=false'
is a Hewlett-Packard hp_laserjet_pro_m148f-m149f all-in-one
device `escl:https://192.168.89.196:443' is a HP LaserJet Pro M148fdw (E27AD3)
flatbed scanner
device `hpaio:/net/hp_laserjet_pro_m148f-m149f?ip=192.168.89.196&queue=false'
is a Hewlett-Packard hp_laserjet_pro_m148f-m149f all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_LaserJet_Pro_M148fdw_E27AD3_
-------------------------------
Type: Unknown
Device URI: implicitclass://HP_LaserJet_Pro_M148fdw_E27AD3_/
PPD: /etc/cups/ppd/HP_LaserJet_Pro_M148fdw_E27AD3_.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_Pro_M148fdw_E27AD3_.ppd ppd
file
PPD Description:
Printer status: printer HP_LaserJet_Pro_M148fdw_E27AD3_ is idle. enabled since
Tue Dec 1 09:02:35 2020
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg62-turbo-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libavahi-client-dev' package is missing/incompatible
error: 'libavahi-core-dev' package is missing/incompatible
error: 'libavahi-common-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp' package is missing/incompatible
error: 'libssl-dev' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'avahi-utils' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 15
Total Warnings: 1
Done.
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.9.0-3-amd64 (SMP w/8 CPU threads)
Kernel taint flags: TAINT_WARN, TAINT_FIRMWARE_WORKAROUND
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages hplip depends on:
ii adduser 3.118
ii cups 2.3.3op1-2
ii hplip-data 3.20.9+dfsg0-4
ii libc6 2.31-4
ii libcups2 2.3.3op1-2
ii libdbus-1-3 1.12.20-1
ii libhpmud0 3.20.9+dfsg0-4
ii libpython3.8 3.8.6-1
ii libsane-hpaio 3.20.9+dfsg0-4
ii libsane1 1.0.31-3
ii lsb-base 11.1.0
ii printer-driver-hpcups 3.20.9+dfsg0-4
ii python3 3.8.6-1
ii python3-dbus 1.2.16-4
ii python3-gi 3.38.0-1+b1
ii python3-pexpect 4.6.0-4
ii python3-pil 8.0.1-1
ii python3-reportlab 3.5.55-1
ii wget 1.20.3-1+b3
ii xz-utils 5.2.4-1+b1
Versions of packages hplip recommends:
ii avahi-daemon 0.8-3
ii policykit-1 0.105-29
ii printer-driver-postscript-hp 3.20.9+dfsg0-4
ii sane-utils 1.0.31-3
Versions of packages hplip suggests:
pn hplip-doc <none>
ii hplip-gui 3.20.9+dfsg0-4
ii python3-notify2 0.3-4
ii system-config-printer 1.5.12-1
-- no debconf information
