Package: src:linux Version: 5.10.4-1 Severity: normal Dear Maintainer,
Please enable CONFIG_CRYPTO_NHPOLY1305_NEON as a module for arm64 builds of the Linux kernel. This allows platforms that do not support AES instructions (such as Raspberry Pi 3/4) to enable efficient block device encryption, using the 'adiantum' template. Kind regards, Ard. -- Package-specific info: ** Version: Linux version 5.10.0-1-arm64 (debian-ker...@lists.debian.org) (gcc-10 (Debian 10.2.1-3) 10.2.1 20201224, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.4-1 (2020-12-31) ** Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-1-arm64 root=UUID=62fa7565-f531-4b0f-9311-59cb70ba2c93 ro quiet ** Not tainted ** Kernel log: [ 3.822227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.822239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.822247] usb usb1: Product: xHCI Host Controller [ 3.822254] usb usb1: Manufacturer: Linux 5.10.0-1-arm64 xhci-hcd [ 3.822261] usb usb1: SerialNumber: PNP0D10:00 [ 3.822910] hub 1-0:1.0: USB hub found [ 3.822979] hub 1-0:1.0: 1 port detected [ 3.823542] xhci-hcd PNP0D10:00: xHCI Host Controller [ 3.823572] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 2 [ 3.823591] xhci-hcd PNP0D10:00: Host supports USB 3.0 SuperSpeed [ 3.823752] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.823936] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 3.823945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.823953] usb usb2: Product: xHCI Host Controller [ 3.823960] usb usb2: Manufacturer: Linux 5.10.0-1-arm64 xhci-hcd [ 3.823966] usb usb2: SerialNumber: PNP0D10:00 [ 3.824623] hub 2-0:1.0: USB hub found [ 3.824677] hub 2-0:1.0: 4 ports detected [ 3.838859] bcmgenet BCM6E4E:00 enabcm6e4ei0: renamed from eth0 [ 4.157943] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 4.312580] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 4.312595] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.312603] usb 1-1: Product: USB2.0 Hub [ 4.314265] hub 1-1:1.0: USB hub found [ 4.314540] hub 1-1:1.0: 4 ports detected [ 4.438232] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 4.460809] usb 2-2: New USB device found, idVendor=18a5, idProduct=0237, bcdDevice= 5.10 [ 4.460819] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.460827] usb 2-2: Product: Portable USB 3.0 Drive [ 4.460835] usb 2-2: Manufacturer: Verbatim [ 4.460842] usb 2-2: SerialNumber: 1407010003245394 [ 4.498931] SCSI subsystem initialized [ 4.513467] usb-storage 2-2:1.0: USB Mass Storage device detected [ 4.514813] scsi host0: usb-storage 2-2:1.0 [ 4.515356] usbcore: registered new interface driver usb-storage [ 4.520563] usbcore: registered new interface driver uas [ 4.673929] libphy: bcmgenet MII bus: probed [ 4.673945] unimac-mdio unimac-mdio: Broadcom UniMAC MDIO bus [ 5.535323] scsi 0:0:0:0: Direct-Access Samsung SSD 850 PRO EXM0 PQ: 0 ANSI: 6 [ 5.556933] sd 0:0:0:0: [sda] 500118188 512-byte logical blocks: (256 GB/238 GiB) [ 5.557351] sd 0:0:0:0: [sda] Write Protect is off [ 5.557362] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 5.557768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.576531] sda: sda1 sda2 [ 5.578991] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.612373] random: fast init done [ 6.084383] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 6.358453] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 6.530927] systemd[1]: Inserted module 'autofs4' [ 6.593403] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.594215] systemd[1]: Detected architecture arm64. [ 6.622998] systemd[1]: Set hostname to <rpi4>. [ 7.062138] random: systemd: uninitialized urandom read (16 bytes read) [ 7.067659] random: systemd: uninitialized urandom read (16 bytes read) [ 7.071927] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.072502] random: systemd: uninitialized urandom read (16 bytes read) [ 7.072985] systemd[1]: Listening on Journal Audit Socket. [ 7.073615] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.075141] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.076570] systemd[1]: Created slice User and Session Slice. [ 7.076698] systemd[1]: Reached target Slices. [ 7.077261] systemd[1]: Listening on udev Kernel Socket. [ 7.230826] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.446370] systemd-journald[220]: Received request to flush runtime journal from PID 1 [ 7.956977] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.064863] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 8.140177] cryptd: max_cpu_qlen set to 1000 [ 8.572745] random: crng init done [ 8.572758] random: 7 urandom warning(s) missed due to ratelimiting [ 8.626854] Bluetooth: Core ver 2.22 [ 8.627007] NET: Registered protocol family 31 [ 8.627015] Bluetooth: HCI device and connection manager initialized [ 8.628647] Bluetooth: HCI socket layer initialized [ 8.628663] Bluetooth: L2CAP socket layer initialized [ 8.628699] Bluetooth: SCO socket layer initialized [ 8.702144] Bluetooth: HCI UART driver ver 2.3 [ 8.702159] Bluetooth: HCI UART protocol H4 registered [ 8.702296] Bluetooth: HCI UART protocol LL registered [ 8.702304] Bluetooth: HCI UART protocol ATH3K registered [ 8.702367] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 8.702570] Bluetooth: HCI UART protocol Intel registered [ 8.702882] Bluetooth: HCI UART protocol Broadcom registered [ 8.702953] Bluetooth: HCI UART protocol QCA registered [ 8.702960] Bluetooth: HCI UART protocol AG6XX registered [ 8.703006] Bluetooth: HCI UART protocol Marvell registered [ 8.764517] audit: type=1400 audit(1604510514.143:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=426 comm="apparmor_parser" [ 8.764549] audit: type=1400 audit(1604510514.143:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=426 comm="apparmor_parser" [ 8.765026] audit: type=1400 audit(1604510514.151:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=427 comm="apparmor_parser" [ 8.765048] audit: type=1400 audit(1604510514.151:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=427 comm="apparmor_parser" [ 8.765065] audit: type=1400 audit(1604510514.151:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=427 comm="apparmor_parser" [ 8.783189] audit: type=1400 audit(1604510514.171:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/aarch64-linux-gnu/lightdm/lightdm-guest-session" pid=425 comm="apparmor_parser" [ 8.783216] audit: type=1400 audit(1604510514.171:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/aarch64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=425 comm="apparmor_parser" [ 9.501478] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 9.501491] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <ja...@zx2c4.com>. All Rights Reserved. [ 9.914262] bcmgenet BCM6E4E:00: configuring instance for external RGMII (RX delay) [ 9.914619] bcmgenet BCM6E4E:00 enabcm6e4ei0: Link is Up - 1Gbps/Full - flow control rx/tx [ 9.914849] IPv6: ADDRCONF(NETDEV_CHANGE): enabcm6e4ei0: link becomes ready [ 10.175742] NET: Registered protocol family 5 [142340.069707] tun: Universal TUN/TAP device driver, 1.6 [1173543.653652] NET: Registered protocol family 38 ** Model information ** Loaded modules: nhpoly1305 adiantum libpoly1305 ecb xts twofish_generic twofish_common serpent_generic cbc algif_skcipher af_alg tun appletalk psnap llc wireguard libchacha20poly1305 chacha_neon poly1305_neon ip6_udp_tunnel udp_tunnel libblake2s libcurve25519_generic libchacha libblake2s_generic nft_counter nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables libcrc32c hci_uart nfnetlink btqca btrtl btbcm btintel bluetooth nls_ascii nls_cp437 vfat fat jitterentropy_rng aes_neon_bs aes_neon_blk crypto_simd cryptd drbg aes_arm64 aes_generic ansi_cprng sg ecdh_generic rfkill ecc libaes efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic sd_mod t10_pi crc_t10dif crct10dif_generic uas usb_storage scsi_mod broadcom bcm_phy_lib mdio_bcm_unimac xhci_plat_hcd xhci_hcd genet of_mdio crct10dif_ce fixed_phy usbcore crct10dif_common libphy usb_common ** PCI devices: ** USB devices: Bus 002 Device 002: ID 18a5:0237 Verbatim, Ltd Portable Harddrive Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 10.7 APT prefers stable APT policy: (500, 'stable') Architecture: arm64 (aarch64) Kernel: Linux 5.10.0-1-arm64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.10.0-1-arm64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1 ii kmod 26-1 ii linux-base 4.6 Versions of packages linux-image-5.10.0-1-arm64 recommends: ii apparmor 2.13.2-10 ii firmware-linux-free 3.4 Versions of packages linux-image-5.10.0-1-arm64 suggests: pn debian-kernel-handbook <none> pn linux-doc-5.10 <none> Versions of packages linux-image-5.10.0-1-arm64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information