U-Boot 2020.07 worked, broken on rockpro64 by commit 3ae64582fb8ceead4fc464cd2055eb3eaef78ccc (refs/bisect/bad) Author: Jagan Teki <ja...@amarulasolutions.com> Date: Mon Jul 20 14:53:09 2020 +0530
rockchip: rockpro64: Enable USB3.0 Host Enable USB3.0 Host support for RockPro64 boards. Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> Reviewed-by: Kever Yang <kever.y...@rock-chips.com> according to Kurt Miller who bisected this when the same problem was encountered booting OpenBSD. I don't have any rk3399 myself. https://marc.info/?l=openbsd-ports&m=161005506031482&w=2 https://marc.info/?l=openbsd-ports&m=161012461223737&w=2 We ended up disabling CONFIG_USE_PREBOOT in rk3399 targets to fix booting via non-usb as well. On Thu, Jan 21, 2021 at 11:37:16AM +0800, Kever Yang wrote: > Hi Vagrant, > > Do you know which version is the last version that works in this case? > > The firmware is from eMMC and it's wired for USB to affect the boot > process. > > Thanks, > > - Kever > > On 2021/1/21 上午8:08, Vagrant Cascadian wrote: > > It seems rockpro64-rk3399 and pinebook-pro-rk3399 fail to boot when usb > > is started. It hangs indefinitely at: > > > > ## Flattened Device Tree blob at 01f00000 > > Booting using the fdt blob at 0x1f00000 > > > > I have observed this also using 2020.10 on rockpro64-rk3399, though on > > pinebook-pro-rk3399 usb does not work and so it basically avoids > > triggering the issue. > > > > Setting CONFIG_USE_PREBOOT=n in the config works around the problem, > > though obviously by breaking usb keyboard support or booting from USB > > devices. > > > > > > Related bugs in Debian and manjaro: > > > > https://bugs.debian.org/973323 > > https://bugs.debian.org/980434 > > > > https://gitlab.manjaro.org/manjaro-arm/packages/core/uboot-rockpro64/-/issues/4 > > > > > > Boot log: > > > > U-Boot 2021.01+dfsg-1 (Jan 17 2021 - 03:50:13 +0000) > > > > SoC: Rockchip rk3399 > > Reset cause: POR > > Model: Pine64 RockPro64 v2.1 > > DRAM: 3.9 GiB > > PMIC: RK808 > > MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0 > > Loading Environment from SPIFlash... SF: Detected gd25q128 with page size > > 256 Bytes, erase size 4 KiB, total 16 MiB > > *** Warning - bad CRC, using default environment > > > > In: serial > > Out: serial > > Err: serial > > Model: Pine64 RockPro64 v2.1 > > Net: eth0: ethernet@fe300000 > > starting USB... > > Bus usb@fe380000: USB EHCI 1.00 > > Bus usb@fe3a0000: USB OHCI 1.0 > > Bus usb@fe3c0000: USB EHCI 1.00 > > Bus usb@fe3e0000: USB OHCI 1.0 > > Bus dwc3: usb maximum-speed not found > > Register 2000140 NbrPorts 2 > > Starting the controller > > USB XHCI 1.10 > > scanning bus usb@fe380000 for devices... 1 USB Device(s) found > > scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found > > scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found > > scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found > > scanning bus dwc3 for devices... 1 USB Device(s) found > > scanning usb for storage devices... 0 Storage Device(s) found > > Hit any key to stop autoboot: 0 > > => printenv preboot > > preboot=usb start > > => usb reset > > resetting USB... > > Bus usb@fe380000: USB EHCI 1.00 > > Bus usb@fe3a0000: USB OHCI 1.0 > > Bus usb@fe3c0000: USB EHCI 1.00 > > Bus usb@fe3e0000: USB OHCI 1.0 > > Bus dwc3: usb maximum-speed not found > > Register 2000140 NbrPorts 2 > > Starting the controller > > USB XHCI 1.10 > > scanning bus usb@fe380000 for devices... 1 USB Device(s) found > > scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found > > scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found > > scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found > > scanning bus dwc3 for devices... 1 USB Device(s) found > > scanning usb for storage devices... 0 Storage Device(s) found > > => boot > > Card did not respond to voltage select! : -110 > > switch to partitions #0, OK > > mmc1 is current device > > Scanning mmc 1:1... > > Found /extlinux/extlinux.conf > > Retrieving file: /extlinux/extlinux.conf > > 144 bytes read in 5 ms (27.3 KiB/s) > > 1: Debian-Installer > > Retrieving file: /initrd.gz > > 28995285 bytes read in 1287 ms (21.5 MiB/s) > > Retrieving file: /vmlinuz > > 26922864 bytes read in 1195 ms (21.5 MiB/s) > > Retrieving file: /dtbs/rockchip/rk3399-rockpro64.dtb > > 56849 bytes read in 13 ms (4.2 MiB/s) > > Moving Image from 0x2080000 to 0x2200000, end=3c50000 > > ## Flattened Device Tree blob at 01f00000 > > Booting using the fdt blob at 0x1f00000 > > > > > > > > live well, > > vagrant > > >