Package: linux-image-2.6.12-1-k7 Version: 2.6.12-10 Severity: important Hello
After upgrading my K7 box The snd_via82xx do not whant to be modprob the error is: dainII:/home/serge# modprobe snd_via82xx FATAL: Error inserting snd (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd WARNING: Error inserting snd_seq_device (/lib/modules/2.6.15-1-k7/kernel/sound/core/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd-rawmidi.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_mpu401_uart (/lib/modules/2.6.15-1-k7/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_timer (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd WARNING: Error inserting snd_timer (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_pcm (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd_pcm WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.15-1-k7/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd WARNING: Error inserting snd_seq_device (/lib/modules/2.6.15-1-k7/kernel/sound/core/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd-rawmidi.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_mpu401_uart (/lib/modules/2.6.15-1-k7/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_timer (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd WARNING: Error inserting snd_timer (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_pcm (/lib/modules/2.6.15-1-k7/kernel/sound/core/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd_pcm WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.15-1-k7/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_via82xx (/lib/modules/2.6.15-1-k7/kernel/sound/pci/snd-via82xx.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error running install command for snd_via82xx I attached the lspci -vv output -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-k7 Locale: LANG=fr_FR, LC_CTYPE=fr_FR (charmap=ISO-8859-1) Versions of packages linux-image-2.6.12-1-k7 depends on: ii coreutils [fileutils] 5.94-1 The GNU core utilities ii fileutils 5.94-1 The GNU file management utilities ii initrd-tools 0.1.84 tools to create initrd image for p ii module-init-tools 3.2.2-2 tools for managing Linux kernel mo linux-image-2.6.12-1-k7 recommends no packages. -- no debconf information
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0235 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 8 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: e0000000-e7ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0235 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 177 Region 4: I/O ports at d000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0235 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin B routed to IRQ 177 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0235 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin C routed to IRQ 177 Region 4: I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0235 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x10 (64 bytes) Interrupt: pin D routed to IRQ 177 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0235 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0235 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 169 Region 4: I/O ports at dc00 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a232 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 10 Region 0: I/O ports at e000 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 185 Region 0: I/O ports at e400 [size=256] Region 1: Memory at ee001000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] (prog-if 00 [VGA]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0235 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 193 Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=512K] Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at ec000000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x4 Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4