Package: hplip Version: 3.21.4+dfsg0-1 Severity: important X-Debbugs-Cc: flore...@biree.name
Dear Maintainer, My HP Deskjet 3055A, used only to scan files, doesn't work anymore when scanning with both hp-scan, xsane or simple-scan, here on Debian unstable/experimental. It used to work with another computer on Debian Buster (didn't try with Bullseye, the computer is dead), as well on other computer with Ubuntu 20.04. Either of this three programs crashes with this message on a terminal: > *** stack smashing detected ***: terminated > fish : Tâche , 'simple-scan' terminée par le signal SIGABRT (Abandon) I tried to 'apt purge' all packages involved in scanning and hplip, and install them again, with the same result. I'm ready to give you more informations if needed… Thanks for your works, Florence -- Package-specific info: Saving output in log file: /home/florence/hp-check.log HP Linux Imaging and Printing System (ver. 3.21.4) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version warning: debian-11 version is not supported. Using debian-10.8 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 5.10.0-8-amd64 #1 SMP Debian 5.10.46-4 (2021-08-03) GNU/Linux Host: lyra Proc: 5.10.0-8-amd64 #1 SMP Debian 5.10.46-4 (2021-08-03) GNU/Linux Distribution: debian 11 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.21.4 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for debian distro 11 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.21.4 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.21.4 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=yes lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no class-driver=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: No such file or directory Current contents of '~/.hplip/hplip.conf' file: [commands] scan = /usr/bin/simple-scan %SANE_URI% [fax] email_address = voice_phone = [installation] date_time = 08/22/21 18:51:05 version = 3.21.4 [last_used] device_uri = hpaio:/usb/Deskjet_3050A_J611_series?serial=CN31L1CQMP05WK printer_name = working_dir = . [polling] device_list = enable = false interval = 5 [refresh] enable = false rate = 30 type = 1 [settings] systray_messages = 0 systray_visible = 0 [upgrade] last_upgraded_time = 1629621696 notify_upgrade = false pending_upgrade_time = 0 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> ------------------------- | External Dependencies | ------------------------- error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.53.3 OK - error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed' scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.32 OK - dbus DBus - Message bus system REQUIRED - 1.12.20 OK - policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - network network -wget OPTIONAL - 1.21 OK - avahi-utils avahi-utils OPTIONAL - 0.8 OK - ------------------------ | General Dependencies | ------------------------ error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed' error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed' error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed' libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK - error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed' sane SANE - Scanning library REQUIRED - - OK - error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed' error: libavahi-dev libavahi-dev REQUIRED - - MISSING 'libavahi-dev needs to be installed' error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK - python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.9.2 OK - python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed' python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.18 OK - python3-xml Python XML libraries REQUIRED - 2.2.10 OK - python3-devel Python devel - Python development files REQUIRED 2.2 3.9.2 OK - python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.1.2 OK - python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.59 OK - -------------- | COMPILEDEP | -------------- error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed' gcc gcc - GNU Project C and C++ Compiler REQUIRED - 10.2.1 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK - --------------------- | Python Extentions | --------------------- cupsext CUPS-Extension REQUIRED - 3.21.4 OK - hpmudext IO-Extension REQUIRED - 3.21.4 OK - ---------------------- | Scan Configuration | ---------------------- '/etc/sane.d/dll.d/hpaio' not found. hpaio HPLIP-SANE-Backend REQUIRED - 3.21.4 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.21.4 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `hpaio:/usb/Deskjet_3050A_J611_series?serial=CN31L1CQMP05WK' is a Hewlett-Packard Deskjet_3050A_J611_series all-in-one -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model -------------------------------------- ---------------------------- hp:/usb/Deskjet_3050A_J611_series?seri HP Deskjet 3050A J611 series al=CN31L1CQMP05WK --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- Canon_MG3600_EEDF_Vert ---------------------- Type: Unknown Device URI: usb://Canon/MG3600%20series?serial=F90AEA&interface=1 PPD: /etc/cups/ppd/Canon_MG3600_EEDF_Vert.ppd warning: Failed to read /etc/cups/ppd/Canon_MG3600_EEDF_Vert.ppd ppd file PPD Description: Printer status: printer Canon_MG3600_EEDF_Vert is idle. enabled since Sun Feb 16 14:13:12 2020 warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Canon_Noire_EEDF_Jojo --------------------- Type: Unknown Device URI: usb://Canon/TS5000%20series?serial=573AD6&interface=1 PPD: /etc/cups/ppd/Canon_Noire_EEDF_Jojo.ppd warning: Failed to read /etc/cups/ppd/Canon_Noire_EEDF_Jojo.ppd ppd file PPD Description: Printer status: printer Canon_Noire_EEDF_Jojo is idle. enabled since Sat Jul 3 02:53:48 2021 warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Canon_Noire_EEDF_Juju --------------------- Type: Unknown Device URI: usb://Canon/TS5000%20series?serial=573BD3&interface=1 PPD: /etc/cups/ppd/Canon_Noire_EEDF_Juju.ppd warning: Failed to read /etc/cups/ppd/Canon_Noire_EEDF_Juju.ppd ppd file PPD Description: Printer status: printer Canon_Noire_EEDF_Juju is idle. enabled since Sun Jun 6 21:01:49 2021 warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Deskjet_3050A_J611 ------------------ Type: Printer Device URI: hp:/usb/Deskjet_3050A_J611_series?serial=CN31L1CQMP05WK PPD: /etc/cups/ppd/Deskjet_3050A_J611.ppd warning: Failed to read /etc/cups/ppd/Deskjet_3050A_J611.ppd ppd file PPD Description: Printer status: printer Deskjet_3050A_J611 is idle. enabled since Sun Aug 22 18:30:10 2021 Communication status: Good HP_Photosmart_EEDF_Noire ------------------------ Type: Printer Device URI: hp:/usb/Photosmart_B010_series?serial=CN08Q2K1YR05K9 PPD: /etc/cups/ppd/HP_Photosmart_EEDF_Noire.ppd warning: Failed to read /etc/cups/ppd/HP_Photosmart_EEDF_Noire.ppd ppd file PPD Description: Printer status: printer HP_Photosmart_EEDF_Noire disabled since Thu Feb 20 19:23:27 2020 - Backend /usr/lib/cups/backend/hp does not exist! [31;01merror: Unable to communicate with device (code=12): hp:/usb/Photosmart_B010_series?serial=CN08Q2K1YR05K9[0m error: Device not found error: Communication status: Failed Imprimante_Parents_HP_C5180 --------------------------- Type: Unknown Device URI: dnssd://Photosmart%20C5100%20series%20%5BB843EE%5D._pdl-datastream._tcp.local/ PPD: /etc/cups/ppd/Imprimante_Parents_HP_C5180.ppd warning: Failed to read /etc/cups/ppd/Imprimante_Parents_HP_C5180.ppd ppd file PPD Description: Printer status: printer Imprimante_Parents_HP_C5180 is idle. enabled since Fri Dec 20 23:44:55 2019 warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Lexmark-An01 ------------ Type: Unknown Device URI: socket://192.168.15.244:9100 PPD: /etc/cups/ppd/Lexmark-An01.ppd warning: Failed to read /etc/cups/ppd/Lexmark-An01.ppd ppd file PPD Description: Printer status: printer Lexmark-An01 is idle. enabled since Fri Aug 13 11:11:49 2021 warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. MG3600-series-EEDF-Grise ------------------------ Type: Unknown Device URI: usb://Canon/MG3600%20series?serial=96F692&interface=1 MP280-series ------------ Type: Unknown Device URI: usb://Canon/MP280%20series?serial=193EED&interface=1 PPD: /etc/cups/ppd/MP280-series.ppd warning: Failed to read /etc/cups/ppd/MP280-series.ppd ppd file PPD Description: Printer status: printer MP280-series disabled since Tue Mar 9 11:59:49 2021 - Unplugged or turned off warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Samsung_C48x_Utopons -------------------- Type: Unknown Device URI: usb://Samsung/C48x%20Series?serial=0BEKB8KHBB0141V&interface=1 PPD: /etc/cups/ppd/Samsung_C48x_Utopons.ppd warning: Failed to read /etc/cups/ppd/Samsung_C48x_Utopons.ppd ppd file PPD Description: Printer status: printer Samsung_C48x_Utopons disabled since Sun Jun 20 15:50:12 2021 - Unplugged or turned off warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Toshiba_Perm ------------ Type: Unknown Device URI: dnssd://TOSHIBA%20e-STUDIO2500AC-12032774._ipp._tcp.local/?uuid=12bcbc24-2634-46bc-b4fd-6e564b29ddfd PPD: /etc/cups/ppd/Toshiba_Perm.ppd warning: Failed to read /etc/cups/ppd/Toshiba_Perm.ppd ppd file PPD Description: Printer status: printer Toshiba_Perm is idle. enabled since Fri Jun 25 14:31:45 2021 warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. XEROX_3100MFP_Diego ------------------- Type: Unknown Device URI: usb://XEROX/Phaser%203100MFP?serial=L510251LE890328 PPD: /etc/cups/ppd/XEROX_3100MFP_Diego.ppd warning: Failed to read /etc/cups/ppd/XEROX_3100MFP_Diego.ppd ppd file PPD Description: Printer status: printer XEROX_3100MFP_Diego disabled since Sat Aug 21 19:05:49 2021 - Unplugged or turned off warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. -------------- | PERMISSION | -------------- USB Deskjet_3050A_J611 Required - - OK Node:'/dev/bus/usb/002/010' Perm:' root lp rw- rw- rw- rw- rw- r--' ----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- error: 'cups' package is missing or 'cups' service is not running. error: 'libcups2' package is missing/incompatible error: 'libjpeg62-turbo-dev' package is missing/incompatible error: 'libcups2-dev' package is missing/incompatible error: 'cups-bsd' package is missing/incompatible error: 'cups-client' package is missing/incompatible error: 'libcupsimage2' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libusb-1.0.0-dev' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libavahi-client-dev' package is missing/incompatible error: 'libavahi-core-dev' package is missing/incompatible error: 'libavahi-common-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible error: 'snmp' package is missing/incompatible error: 'python3-pyqt4' package is missing/incompatible error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'libtool' package is missing/incompatible error: 'libtool-bin' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'xsane' package is missing/incompatible error: 'python3-dbus.mainloop.qt' package is missing/incompatible Total Errors: 13 Total Warnings: 9 Done. -- System Information: Debian Release: 11.0 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-8-amd64 (SMP w/4 CPU threads) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages hplip depends on: ii adduser 3.118 ii cups 2.3.3op2-3+deb11u1 ii hplip-data 3.21.4+dfsg0-1 ii libc6 2.31-16 ii libcups2 2.3.3op2-3+deb11u1 ii libdbus-1-3 1.12.20-2 ii libhpmud0 3.21.4+dfsg0-1 ii libpython3.9 3.9.2-1 ii libsane-hpaio 3.21.4+dfsg0-1 ii libsane1 1.0.32-4 ii lsb-base 11.1.0 ii printer-driver-hpcups 3.21.4+dfsg0-1 ii python3 3.9.2-3 ii python3-dbus 1.2.18-2 ii python3-gi 3.40.1-2 ii python3-pexpect 4.8.0-2 ii python3-pil 8.1.2+dfsg-0.3 ii python3-reportlab 3.5.59-2 ii wget 1.21-1+b1 ii xz-utils 5.2.5-2 Versions of packages hplip recommends: ii avahi-daemon 0.8-5 ii policykit-1 0.105-31 ii printer-driver-postscript-hp 3.21.2+dfsg1-2 ii sane-utils 1.0.32-4 Versions of packages hplip suggests: pn hplip-doc <none> ii hplip-gui 3.21.2+dfsg1-2 ii python3-notify2 0.3-4 ii system-config-printer 1.5.14-1 -- no debconf information