hi all, I looked at an old bug regarding my scsi hardware:
On Wed, Mar 08, 2006 at 11:00:43PM +0100, Philippe Bourcier wrote: > Package: linux-image-2.6-686 > Version: 2.6.15-8 > Followup-For: Bug #348782 [...] > debian 2.6.15-8 doesn't resolve: > > I have a scsi tower (2*dd, cdrom reader, cdrom burner) connected to my > laptop with a pcmcia card: > Adaptec, Inc. - APA-1460 SCSI Host Adapter > when I keep the tower shuted, everything is ok: I can boot with the card > inserted > when I power on the tower, the boot crash: > (I copy the message by hand) > > BUG: soft lockup detected on CPUU#0! > Pid: 4, comm: events/0 > EIP: 0060 [<c0121d40>]CPU:0 > EIP is at worker_thread+0x129/0x19f > EFLAGS: 00000246 Not tainted (2.6.15-1-686) > EAX: c8c83084 EBX: c8c83084 ECX: c8c83080 EDX: c8c83084 > ESI: c7ff59a0 EDI: 00000246 EBP: 00000000 DS: 0076 ES:007b > CR0: 8005003b CR2: bfd25124 CR3: 076e3000 CR4: 00000240 > [<c8c7c31a>] run+0x0/0x3b [aha152_cs] > [<c0113708>] default_wake_function+0x0/0x12 > [<c0121c17>] worker_thread+0x0/0x19f > [<c0124bd0>] kthread+0x68/0x95 > [<c0124b68>] kthread+0x68/0x95 > [<c01012a9>] kernel_thread_helper+0x5/0xb > [...] > -- System Information: > Debian Release: testing/unstable > APT prefers unstable > APT policy: (500, 'unstable') > Architecture: i386 (i686) > Shell: /bin/sh linked to /bin/bash > Kernel: Linux 2.6.15-1-686 > Locale: LANG=en_US.UTF-8, [EMAIL PROTECTED] (charmap=UTF-8) (ignored: LC_ALL > set to en_US.UTF-8) > > Versions of packages linux-image-2.6-686 depends on: > ii linux-image-2.6.15-1-686 2.6.15-8 Linux kernel 2.6.15 image on > PPro/ > > linux-image-2.6-686 recommends no packages. > > -- no debconf information now, it "seems" to work... just (scsi0:0:0) command sent incompletely (1/12) and (scsi0:1:0) command sent incompletely (1/12) annoys me; am I wrong? $ uname -a Linux ile 2.6.16-1-686 #2 Thu Apr 20 20:35:02 UTC 2006 i686 GNU/Linux $ dmesg Linux version 2.6.16-1-686 (Debian 2.6.16-9) ([EMAIL PROTECTED]) (gcc version 4.0.3 (Debian 4.0.3-1)) #2 Thu Apr 20 20:35:02 UTC 2006 [...] PCI: Found IRQ 11 for device 0000:00:03.0 Yenta: CardBus bridge found at 0000:00:03.0 [0000:0000] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:03.0, mfunc 0xcba97543, devctl 0x62 Yenta: ISA IRQ mask 0x06b8, PCI irq 11 Socket status: 30000010 PCI: Found IRQ 11 for device 0000:00:03.1 Yenta: CardBus bridge found at 0000:00:03.1 [0000:0000] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:03.1, mfunc 0xcba97543, devctl 0x62 [...] Yenta: ISA IRQ mask 0x06b8, PCI irq 11 Socket status: 30000010 [...] pccard: PCMCIA card inserted into slot 0 pccard: PCMCIA card inserted into slot 1 [...] cs: IO port probe 0x100-0x4ff: excluding 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f cs: IO port probe 0x100-0x4ff: excluding 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. usb 1-1.4: configuration #1 chosen from 1 choice cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia: registering new device pcmcia0.0 cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff pcmcia: registering new device pcmcia1.0 [...] SCSI subsystem initialized aha152x: resetting bus... aha152x0: vital data: rev=1, io=0x340 (0x340/0x340), irq=3, scsiid=7, reconnect=enabled, parity=enabled, synchronous=enabled, delay=100, extended translation=disabled aha152x0: trying software interrupt, ok. scsi0 : Adaptec 152x SCSI driver; $Revision: 2.7 $ (scsi0:0:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: IBM Model: DNES-309170 Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:0:0) command sent incompletely (1/12) (scsi0:1:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: IBM Model: DNES-309170 Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:1:0) command sent incompletely (1/12) (scsi0:2:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:3:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: YAMAHA Model: CRW8424S Rev: 1.0d Type: CD-ROM ANSI SCSI revision: 02 [...] SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) ts: Compaq touchscreen protocol output sda: Write Protect is off sda: Mode Sense: c3 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) sda: Write Protect is off sda: Mode Sense: c3 00 00 08 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB) sdb: Write Protect is off sdb: Mode Sense: c3 00 00 08 SCSI device sdb: drive cache: write back SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB) sdb: Write Protect is off sdb: Mode Sense: c3 00 00 08 SCSI device sdb: drive cache: write back sdb: sdb1 sd 0:0:1:0: Attached scsi disk sdb sr0: scsi3-mmc drive: 0x/0x caddy sr 0:0:2:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray sr 0:0:3:0: Attached scsi CD-ROM sr1 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 sr 0:0:2:0: Attached scsi generic sg2 type 5 sr 0:0:3:0: Attached scsi generic sg3 type 5 Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. [...] $ sudo lshw -businfo Bus info Device Class Description =================================================== [...] scsi0 storage [EMAIL PROTECTED]:0.0.0 /dev/sda disk DNES-309170 [EMAIL PROTECTED]:0.0.0,1 /dev/sda1 disk FAT16 partition [EMAIL PROTECTED]:0.0.0,2 /dev/sda2 disk HPFS/NTFS partition [EMAIL PROTECTED]:0.0.0,3 /dev/sda3 disk HPFS/NTFS partition [EMAIL PROTECTED]:0.1.0 /dev/sdb disk DNES-309170 [EMAIL PROTECTED]:0.1.0,1 /dev/sdb1 disk Linux filesystem partition [EMAIL PROTECTED]:0.2.0 /dev/cdrom2 disk CD-ROM PX-40TS /dev/cdrom2 disk [EMAIL PROTECTED]:0.3.0 /dev/cdrom1 disk CRW8424S /dev/cdrom1 disk [...] $ lspci -vv [...] 0000:00:03.0 CardBus bridge: Texas Instruments PCI1250 (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at 18010000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=04, sec-latency=176 Memory window 0: 10000000-11fff000 (prefetchable) Memory window 1: 12000000-13fff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:00:03.1 CardBus bridge: Texas Instruments PCI1250 (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 0x08 (32 bytes) Interrupt: pin B routed to IRQ 11 Region 0: Memory at 18011000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=05, subordinate=08, sec-latency=176 Memory window 0: 14000000-15fff000 (prefetchable) Memory window 1: 16000000-17fff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 [...] $ cat /proc/interrupts CPU0 0: 2012276 XT-PIC timer 1: 3606 XT-PIC i8042 2: 0 XT-PIC cascade 3: 2009 XT-PIC aha152x 5: 3 XT-PIC soundblaster 7: 6 XT-PIC parport0 8: 4 XT-PIC rtc 9: 120 XT-PIC pcmcia1.0 11: 18157 XT-PIC yenta, yenta, uhci_hcd:usb1 12: 102 XT-PIC i8042 14: 12307 XT-PIC ide0 15: 17571 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 $ sudo cardctl ident [...] Socket 0: product info: "Adaptec, Inc.", "APA-1460 SCSI Host Adapter", "Version 0.01" manfid: 0x012f, 0x0002 [...] ~/tmp$ sudo ./cbdump 00:03.0 CardBus bridge: Texas Instruments PCI1250 -- generic cardbus config registers Vendor ID [00] : 0x104c Device ID [02] : 0xac16 PCI command [04] : 0x0007 Base address [10] : 0x18010000 Memory Base 0 [1c] : 0x10000000 Memory Limit 0 [20] : 0x11fff000 Memory Base 1 [24] : 0x12000000 Memory Limit 1 [28] : 0x13fff000 IO Base 0 [2c] : 0x00001800 IO Limit 0 [30] : 0x000018fc IO Base 1 [34] : 0x00001c00 IO Limit 1 [38] : 0x00001cfc Bridge control [3e] : 0x05c0 Subsystem vendor ID [40] : 0x0000 Subsystem device ID [42] : 0x0000 Legacy mode base [44] : 0x0001 -- TI specific config registers System control [80] : 0x0844f061 IRQ Mux [8c] : 0xcba97523 Retry [90] : 0xc0 Card control [91] : 0x83 Device control [92] : 0x62 Diagnostic [93] : 0x61 -- cardbus registers CB_SOCKET_EVENT [00] : 0x00000000 CB_SOCKET_MASK [04] : 0x00000006 CB_SOCKET_STATE [08] : 0x30000459 CB_SOCKET_FORCE [0c] : 0x00000000 CB_SOCKET_CONTROL [10] : 0x00000020 CB_SOCKET_POWER [20] : 0x00000000 -- exca registers I365_IDENT [00] : 0x84 I365_STATUS [01] : 0x7f I365_POWER [02] : 0x90 I365_INTCTL [03] : 0x73 I365_CSC [04] : 0x00 I365_CSCINT [05] : 0x08 I365_ADDRWIN [06] : 0x41 I365_IOCTL [07] : 0x02 I365_GENCTL [16] : 0x00c0 I365_GBLCTL [1e] : 0x0000 I365_IO0_START [08] : 0x0340 I365_IO0_STOP [0a] : 0x035f I365_IO1_START [0c] : 0x0000 I365_IO1_STOP [0e] : 0x0001 I365_MEM0_START [10] : 0x0000 I365_MEM0_STOP [12] : 0x8000 I365_MEM0_OFF [14] : 0x4002 I365_MEM0_PAGE [40] : 0xa0 I365_MEM1_START [18] : 0x0000 I365_MEM1_STOP [1a] : 0x0000 I365_MEM1_OFF [1c] : 0x0000 I365_MEM1_PAGE [41] : 0x00 I365_MEM2_START [20] : 0x0000 I365_MEM2_STOP [22] : 0x0000 I365_MEM2_OFF [24] : 0x0000 I365_MEM2_PAGE [42] : 0x00 I365_MEM3_START [28] : 0x0000 I365_MEM3_STOP [2a] : 0x0000 I365_MEM3_OFF [2c] : 0x0000 I365_MEM3_PAGE [43] : 0x00 I365_MEM4_START [30] : 0x0000 I365_MEM4_STOP [32] : 0x0000 I365_MEM4_OFF [34] : 0x0000 I365_MEM4_PAGE [44] : 0x00 00:03.1 CardBus bridge: Texas Instruments PCI1250 -- generic cardbus config registers Vendor ID [00] : 0x104c Device ID [02] : 0xac16 PCI command [04] : 0x0007 Base address [10] : 0x18011000 Memory Base 0 [1c] : 0x14000000 Memory Limit 0 [20] : 0x15fff000 Memory Base 1 [24] : 0x16000000 Memory Limit 1 [28] : 0x17fff000 IO Base 0 [2c] : 0x00002000 IO Limit 0 [30] : 0x000020fc IO Base 1 [34] : 0x00002400 IO Limit 1 [38] : 0x000024fc Bridge control [3e] : 0x05c0 Subsystem vendor ID [40] : 0x0000 Subsystem device ID [42] : 0x0000 Legacy mode base [44] : 0x0001 -- TI specific config registers System control [80] : 0x0844f061 IRQ Mux [8c] : 0xcba97523 Retry [90] : 0xc0 Card control [91] : 0x83 Device control [92] : 0x62 Diagnostic [93] : 0x61 -- cardbus registers CB_SOCKET_EVENT [00] : 0x00000000 CB_SOCKET_MASK [04] : 0x00000006 CB_SOCKET_STATE [08] : 0x30000459 CB_SOCKET_FORCE [0c] : 0x00000000 CB_SOCKET_CONTROL [10] : 0x00000020 CB_SOCKET_POWER [20] : 0x00000000 -- exca registers I365_IDENT [00] : 0x84 I365_STATUS [01] : 0x6f I365_POWER [02] : 0x90 I365_INTCTL [03] : 0x79 I365_CSC [04] : 0x00 I365_CSCINT [05] : 0x08 I365_ADDRWIN [06] : 0x41 I365_IOCTL [07] : 0x01 I365_GENCTL [16] : 0x00c0 I365_GBLCTL [1e] : 0x0000 I365_IO0_START [08] : 0x0310 I365_IO0_STOP [0a] : 0x031f I365_IO1_START [0c] : 0x0000 I365_IO1_STOP [0e] : 0x0001 I365_MEM0_START [10] : 0x0100 I365_MEM0_STOP [12] : 0x8100 I365_MEM0_OFF [14] : 0x7f00 I365_MEM0_PAGE [40] : 0xa0 I365_MEM1_START [18] : 0x0000 I365_MEM1_STOP [1a] : 0x0000 I365_MEM1_OFF [1c] : 0x0000 I365_MEM1_PAGE [41] : 0x00 I365_MEM2_START [20] : 0x0000 I365_MEM2_STOP [22] : 0x0000 I365_MEM2_OFF [24] : 0x0000 I365_MEM2_PAGE [42] : 0x00 I365_MEM3_START [28] : 0x0000 I365_MEM3_STOP [2a] : 0x0000 I365_MEM3_OFF [2c] : 0x0000 I365_MEM3_PAGE [43] : 0x00 I365_MEM4_START [30] : 0x0000 I365_MEM4_STOP [32] : 0x0000 I365_MEM4_OFF [34] : 0x0000 I365_MEM4_PAGE [44] : 0x00 ask if you need more, hope this will help, -- / \ ((__-^^-,-^^-__)) .''`. Philippe BOURCIER `-_---' `---_-' .-. : :' : http://bourcier.philippe.online.fr `--|o` 'o|--' /V\ `. `' \ ` / // \\ `- Linux Counter registered user #290012 ): :( /( )\ :o_o: ^^-^^ "-" -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]