Package: installation-reports Boot method: cd Image version: http://people.debian.org/~luther/d-i/images/2006-04-23/powerpc64/netboot64/mini.iso Date: 4/24/06 11:15
Machine: Xserve G5 cluster node (headless), external firewire cdrom Processor: PowerPC970 Memory: 2GB Partitions: none yet; testing installer bootability Output of lspci and lspci -n: N/A Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: boot hangs at 'Trying to im_free nonexistent area (d0000800820d7000)'; see log below /proc/cpuinfo (from another distro) $ cat /proc/cpuinfo processor : 0 cpu : PPC970FX, altivec supported clock : 2000.000000MHz revision : 3.0 (pvr 003c 0300) processor : 1 cpu : PPC970FX, altivec supported clock : 2000.000000MHz revision : 3.0 (pvr 003c 0300) timebase : 33333333 machine : RackMac3,1 motherboard : RackMac3,1 MacRISC4 Power Macintosh detected as : 339 (XServe G5) pmac flags : 00000000 L2 cache : 512K unified pmac-generation : NewWorld log of failed debian boot attempt: 0 > dir cd:,\install sbp2:Open ->login? speed=ffffffff 2 2 Size/ GMT File/Dir bytes date time TYPE CRTR Name 572 4/23/ 6 20:39:32 ???? ???? boot.msg 4764408 4/23/ 6 20:39:27 ???? ???? netboot64-initrd.gz 6030659 4/23/ 6 20:39:32 ???? ???? netboot64-linux 260 4/23/ 6 20:39:32 tbxi UNIX ofboot.b 149740 4/23/ 6 20:39:32 boot UNIX yaboot 571 4/23/ 6 20:39:32 conf UNIX yaboot.conf ok 0 > boot cd:,\install\yaboot sbp2:Open ->login? speed=ffffffff 2 2 load-size=248ec adler32=881546ed Loading ELF sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 Config file read, 571 bytes sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 Welcome to Debian GNU/Linux etch! This is a Debian installation netboot image, built on 20060423. The default option is 'install'. For maximum control, you can use the 'expert' option. If the system fails to boot at all (the typical symptom is a white screen which doesn't go away), use 'install video=ofonly' or 'expert video=ofonly'. Press the tab key for a list of options, or type 'help' for help. ************************************ If in doubt, just choose 'install', and if that doesn't work, try 'install video=ofonly'. ************************************ Welcome to yaboot version 1.3.13 Enter "help" to get some basic usage information sbp2:Open ->login? speed=ffffffff 2 2 boot: * install expert rescue boot: expert video=ofonly console=ttyS0,57600 Please wait, loading kernel... sbp2:Open ->login? speed=ffffffff 2 2 \ sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 |/-\|/-\|/-\|/-\ Elf64 kernel loaded... Loading ramdisk... sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 | sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 sbp2:Open ->login? speed=ffffffff 2 2 /-\|/-\|/-\|/-\|/-ramdisk loaded at 01a00000, size: 4652 Kbytes OF stdout device is: /[EMAIL PROTECTED],f2000000/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] command line: root=/dev/ram ro ramdisk_size=4692 DEBCONF_PRIORITY=low -- video=ofonly console=ttyS0,57600 memory layout at init: memory_limit : 0000000000000000 (16 MB aligned) alloc_bottom : 0000000001e8c000 alloc_top : 0000000030000000 alloc_top_hi : 0000000080000000 rmo_top : 0000000030000000 ram_top : 0000000080000000 Looking for displays copying OF device tree ... Building dt strings... Building dt structure... Device tree strings 0x000000000228d000 -> 0x000000000228e379 Device tree struct 0x000000000228f000 -> 0x00000000022a2000 Calling quiesce ... DO-QUIESCE finishedreturning from prom_init Hello World ! Page orders: linear mapping = 24, others = 12 Found initrd at 0xc000000001a00000:0xc000000001e8b2f8 Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35 Mapped at 0xd000080080000000 Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080041000 PowerMac motherboard: XServe G5 boot stdout isn't a display ! DART: table not allocated, using direct DMA CF000100 MM Init F000100 MM Init Done CF000012 Setup Arch CF000015 Setup Done Starting Linux PPC64 #2 SMP Mon Apr 10 18:55:49 CEST 2006 ----------------------------------------------------- ppc64_pft_size = 0x0 ppc64_interrupt_controller = 0x1 platform = 0x400 physicalMemorySize = 0x80000000 ppc64_caches.dcache_line_size = 0x80 ppc64_caches.icache_line_size = 0x80 htab_address = 0xc00000007c000000 htab_hash_mask = 0x3ffff ----------------------------------------------------- [boot]0100 MM Init [boot]0100 MM Init Done Linux version 2.6.16-1-powerpc64 (Debian 2.6.16-6) ([EMAIL PROTECTED]) (gcc version 4.0.3 (Debian 4.0.3-1)) #2 SMP Mon Apr 10 18:55:49 CEST 2006 [boot]0012 Setup Arch Top of RAM: 0x80000000, Total RAM: 0x80000000 Memory hole size: 0MB Found U3-AGP PCI host bridge. Firmware bus number: 240->255 Can't get bus-range for /[EMAIL PROTECTED],f2000000, assume bus 0 Found U3-HT PCI host bridge. Firmware bus number: 0->239 PCI Host 0, io start: 400000; io end: bfffff PCI Host 1, io start: 0; io end: 3fffff via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 0c nvram: Checking bank 0... nvram: gen0=104, gen1=105 nvram: Active bank is: 1 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 [boot]0015 Setup Done Built 1 zonelists Kernel command line: root=/dev/ram ro ramdisk_size=4692 DEBCONF_PRIORITY=low -- video=ofonly console=ttyS0,57600 mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs mpic: ISU size: 120, shift: 7, mask: 7f mpic: Initializing for 120 sources mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs mpic: ISU size: 124, shift: 7, mask: 7f mpic: Initializing for 124 sources PID hash table entries: 4096 (order: 12, 131072 bytes) time_init: decrementer frequency = 33.333333 MHz time_init: processor frequency = 2000.000000 MHz Page orders: linear mapping = 24, others = 12 Found initrd at 0xc000000001a00000:0xc000000001e8b2f8 Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35 Mapped at 0xd000080080000000 Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080041000 PowerMac motherboard: XServe G5 boot stdout isn't a display ! DART: table not allocated, using direct DMA Starting Linux PPC64 #2 SMP Mon Apr 10 18:55:49 CEST 2006 ----------------------------------------------------- ppc64_pft_size = 0x0 ppc64_interrupt_controller = 0x1 platform = 0x400 physicalMemorySize = 0x80000000 ppc64_caches.dcache_line_size = 0x80 ppc64_caches.icache_line_size = 0x80 htab_address = 0xc00000007c000000 htab_hash_mask = 0x3ffff ----------------------------------------------------- [boot]0100 MM Init [boot]0100 MM Init Done Linux version 2.6.16-1-powerpc64 (Debian 2.6.16-6) ([EMAIL PROTECTED]) (gcc version 4.0.3 (Debian 4.0.3-1)) #2 SMP Mon Apr 10 18:55:49 CEST 2006 [boot]0012 Setup Arch Top of RAM: 0x80000000, Total RAM: 0x80000000 Memory hole size: 0MB Found U3-AGP PCI host bridge. Firmware bus number: 240->255 Can't get bus-range for /[EMAIL PROTECTED],f2000000, assume bus 0 Found U3-HT PCI host bridge. Firmware bus number: 0->239 PCI Host 0, io start: 400000; io end: bfffff PCI Host 1, io start: 0; io end: 3fffff via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 0c nvram: Checking bank 0... nvram: gen0=104, gen1=105 nvram: Active bank is: 1 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 [boot]0015 Setup Done Built 1 zonelists Kernel command line: root=/dev/ram ro ramdisk_size=4692 DEBCONF_PRIORITY=low -- video=ofonly console=ttyS0,57600 mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs mpic: ISU size: 120, shift: 7, mask: 7f mpic: Initializing for 120 sources mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs mpic: ISU size: 124, shift: 7, mask: 7f mpic: Initializing for 124 sources PID hash table entries: 4096 (order: 12, 131072 bytes) time_init: decrementer frequency = 33.333333 MHz time_init: processor frequency = 2000.000000 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) freeing bootmem node 0 Memory: 2019748k/2097152k available (3392k kernel code, 77404k reserved, 920k data, 304k bss, 236k init) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 smp_core99_probe PowerMac SMP probe found 2 cpus KeyWest i2c @0xf8001003 irq 128 /[EMAIL PROTECTED],f8000000/[EMAIL PROTECTED] channel 0 bus <multibus> channel 1 bus <multibus> KeyWest i2c @0x80018000 irq 26 /[EMAIL PROTECTED],f2000000/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] channel 0 bus <multibus> PMU i2c /[EMAIL PROTECTED],f2000000/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/pmu-i2c channel 1 bus <multibus> channel 2 bus <multibus> Processor timebase sync using Pulsar i2c clock requesting IPIs ... IPIs requested... smp_core99_kick_cpu smp_core99_kick_cpu done Processor 1 found. Brought up 2 CPUs core99_setup_cpu 0 done migration_cost=685 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 4652k freed NET: Registered protocol family 16 Linux ppc64 #2 SMP Mon Apr 10 18:55:49 CEST 2006 PCI: Probing PCI hardware mapping IO f0000000 -> d000080000400000, size: 800000 mapping IO f4000000 -> d000080000000000, size: 400000 PCI: Probing PCI hardware done nvram_init: Could not find nvram partition for nvram buffered error logging. audit: initializing netlink socket (disabled) audit(1145894141.991:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered HVSI: registered 0 devices Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled pmac_zilog: 0.6 (Benjamin Herrenschmidt <[EMAIL PROTECTED]>) pmac_zilog: Error registering serial device, disabling pmac_zilog. pmac_zilog: Did another serial driver already claim the minors? Trying to im_free nonexistent area (d0000800820d7000) Thanks, Toni -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]