Package: powersaved
Version: 0.12.18-1
Severity: normal
Michael,
I'm using a Dell Latitude D600 with acpi.
When using the "ondemand" I get the upper and lower freq's set to the same
value, thus the
governor never switches up or down values:
dell:~# cpufreq-info
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to [EMAIL PROTECTED], please.
analyzing CPU 0:
driver: centrino
CPUs which need to switch frequency at the same time: 0
hardware limits: 600 MHz - 1.60 GHz
available frequency steps: 1.60 GHz, 1.60 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz,
1000 MHz, 800 MHz, 600 MHz
available cpufreq governors: ondemand, userspace, powersave, performance
current policy: frequency should be within 600 MHz and 600 MHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 600 MHz (asserted by call to hardware).
To fix I have to force the upper limit to what it should be:
dell:~# cpufreq-set -u 1.6G
Then the system performs as expected:
dell:~# cpufreq-info
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to [EMAIL PROTECTED], please.
analyzing CPU 0:
driver: centrino
CPUs which need to switch frequency at the same time: 0
hardware limits: 600 MHz - 1.60 GHz
available frequency steps: 1.60 GHz, 1.60 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz,
1000 MHz, 800 MHz, 600 MHz
available cpufreq governors: ondemand, userspace, powersave, performance
current policy: frequency should be within 600 MHz and 1.60 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 600 MHz (asserted by call to hardware).
Mark
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages powersaved depends on:
ii adduser 3.87 Add and remove users and groups
ii dbus 0.61-6 simple interprocess messaging syst
ii hal 0.5.7-2 Hardware Abstraction Layer
ii libc6 2.3.6-15 GNU C Library: Shared libraries
ii libcpufreq0 002-1 shared library to deal with the cp
ii libdbus-1-2 0.61-6 simple interprocess messaging syst
ii libdbus-glib-1-2 0.61-6 simple interprocess messaging syst
ii libgcc1 1:4.1.1-2 GCC support library
ii libglib2.0-0 2.10.3-1 The GLib library of C routines
ii libhal1 0.5.7-2 Hardware Abstraction Layer - share
ii libpowersave10 0.12.18-1 power management daemon - shared l
ii libstdc++6 4.1.1-2 The GNU Standard C++ Library v3
ii libsysfs2 2.0.0-7 interface library to sysfs
ii lsb-base 3.1-10 Linux Standard Base 3.1 init scrip
Versions of packages powersaved recommends:
ii acpid 1.0.4-5 Utilities for using ACPI power man
ii hdparm 6.6-1 tune hard disk parameters for high
ii kpowersave 0.6.1-1 frontend to powersave for setting
-- no debconf information
Kernel version : 2.6.16-2-686 - ACPI version : 20060127
-----------------------------------------------------------
Battery #1 : present
Remaining capacity : 53280 mWh, 100.0%
Design capacity : 53280 mWh
Last full capacity : 51670 mWh, 96.98% of design capacity
Capacity loss : 3.022%
Present rate : 0
Charging state : charged
Battery type : rechargeable, LION
Model number : DELL C26036
Serial number : 48728
Battery #2 : present
Remaining capacity : 36960 mWh, 77.44%, 02:30:45
Design capacity : 46620 mWh
Last full capacity : 47730 mWh
Present rate : 14709 mW
Charging state : discharging
Battery type : rechargeable, LiP
Model number : DELL 0000M7
Serial number : 233
All batteries : 90.78%, 06:08:06
AC adapter : off-line
Fan : <not available>
CPU type : Intel(R) Pentium(R) M processor 1600MHz
CPU speed : 600.000 MHz
Bogomips : 449.35
Processor ID : 0
Bus mastering control : yes
Power management : yes
Throttling control : yes
Limit interface : yes
Active C-state : C2
C-states (incl. C0) : 5
Usage of state C1 : 10 (0.0 %)
Usage of state C2 : 55819421 (86.0 %)
Usage of state C3 : 762396 (1.2 %)
Usage of state C4 : 8293918 (12.8 %)
T-state count : 8
Active T-state : T0
Thermal zone 1 : ok, 34 C
Trip points :
-------------
critical (S5): 102 C
Device Sleep state Status
---------------------------------------
1. LID 3 * enabled
2. PBTN 4 * enabled
3. PCI0 3 disabled
4. USB0 1 disabled
5. USB1 1 disabled
6. USB2 1 disabled
7. USB3 1 disabled
8. MODM 3 disabled
9. PCIE 4 disabled
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
