Hello and thanks for responding, I am unable to boot into 5.10.0-38 on this system. GRUB appears to be overridden by something at the firmware or bootloader level - grub-set-default, grub-reboot, and manual grub.cfg configuration all fail to change the boot target. Both kernels are installed. I can only provide logs from 5.10.0-39.
Attached are the logs for 5.10.0-39. If the logs for 5.10.0-38 are critical I can try entirely reverting back to that build. Sent with Proton Mail secure email. On Wednesday, April 15th, 2026 at 10:13, Uwe Kleine-König <[email protected]> wrote: > Control: tag -1 + moreinfo > > Hello, > > On Mon, Apr 13, 2026 at 04:43:59PM +0000, JMCoates wrote: > > Package: linux > > Version: 5.10.251-1 > > Severity: important > > > > Intel Wi-Fi 6 AX200 Bluetooth stopped functioning after upgrading from > > kernel 5.10.0-38-amd64 (5.10.249-1) to 5.10.0-39-amd64 (5.10.251-1). > > WiFi on the same card continues to work normally. > > > > Symptoms: > > - GNOME Bluetooth settings reports "No Bluetooth found" > > - hciconfig -a and hcitool dev return no devices > > - /sys/class/bluetooth does not exist at boot > > - bluetooth.service skips repeatedly due to missing ConditionPathIsDirectory > > - btintel module is present but does not bind to the device > > > > dmesg shows WiFi firmware loads normally but no BT firmware load attempt > > appears anywhere in the log. On a working system a separate btintel/iwlwifi > > line loading BT firmware would be expected alongside the wifi firmware load. > > > > Hardware: > > - Intel Wi-Fi 6 AX200 160MHz, PCIe, 0000:01:00.0, REV=0x340 > > - Firmware: iwlwifi-cc-a0-59.ucode, version 59.601f3a66.0 > > > > Kernel versions: > > - 5.10.0-38-amd64 (5.10.249-1): Bluetooth working prior to upgrade > > - 5.10.0-39-amd64 (5.10.251-1): Bluetooth broken > > > > Regression timing confirmed via /var/log/dpkg.log showing kernel > > upgradeoccurred April 12 2026. > > Can you please provide boot logs for both 5.10.0-38-amd64 and > 5.10.0-39-amd64? > > Best regards > Uwe >
[ 0.000000] Linux version 5.10.0-39-amd64 ([email protected]) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.251-1 (2026-03-09) [ 0.000000] Command line: root=UUID=9c9749ba-930e-496f-a2d1-563208d82efa ro quiet splash firmware_class.path=/firmware/ [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000099a3bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000099a3c000-0x000000009f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fc000fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed17fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed83fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x00100000-0x0010002f] usable ==> usable [ 0.000000] e820: update [mem 0x00100000-0x0010002f] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000010002f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000100030-0x0000000099a3bfff] usable [ 0.000000] reserve setup_data: [mem 0x0000000099a3c000-0x000000009f7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fc000000-0x00000000fc000fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed17fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed83fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feda0000-0x00000000feda1fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045e7fffff] usable [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: Purism librem_mini_v2/librem_mini_v2, BIOS PureBoot-Release-30 01/01/1970 [ 0.000000] tsc: Detected 1600.000 MHz processor [ 0.000000] tsc: Detected 1599.960 MHz TSC [ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000014] last_pfn = 0x45e800 max_arch_pfn = 0x400000000 [ 0.000017] MTRR default type: write-back [ 0.000017] MTRR fixed ranges enabled: [ 0.000018] 00000-9FFFF write-back [ 0.000019] A0000-BFFFF uncachable [ 0.000020] C0000-FFFFF write-back [ 0.000020] MTRR variable ranges enabled: [ 0.000021] 0 base 009A000000 mask 7FFE000000 uncachable [ 0.000022] 1 base 009C000000 mask 7FFC000000 uncachable [ 0.000023] 2 base 00A0000000 mask 7FE0000000 uncachable [ 0.000024] 3 base 00C0000000 mask 7FF0000000 uncachable [ 0.000024] 4 base 00D0000000 mask 7FF0000000 write-combining [ 0.000025] 5 base 00E0000000 mask 7FE0000000 uncachable [ 0.000025] 6 disabled [ 0.000026] 7 disabled [ 0.000026] 8 disabled [ 0.000027] 9 disabled [ 0.000304] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000524] last_pfn = 0x99a3c max_arch_pfn = 0x400000000 [ 0.006551] Using GB pages for direct mapping [ 0.006843] RAMDISK: [mem 0x457b1d000-0x45abfffff] [ 0.006845] ACPI: Early table checksum verification disabled [ 0.006847] ACPI: RSDP 0x0000000099A44000 000024 (v02 COREv4) [ 0.006850] ACPI: XSDT 0x0000000099A440E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.006854] ACPI: FACP 0x0000000099A46490 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.006858] ACPI: DSDT 0x0000000099A44280 00220C (v02 COREv4 COREBOOT 20110725 INTL 20230628) [ 0.006860] ACPI: FACS 0x0000000099A44240 000040 [ 0.006862] ACPI: FACS 0x0000000099A44240 000040 [ 0.006864] ACPI: SSDT 0x0000000099A465B0 0028EE (v02 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.006866] ACPI: MCFG 0x0000000099A48EA0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.006868] ACPI: LPIT 0x0000000099A48EE0 000094 (v00 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.006870] ACPI: APIC 0x0000000099A48F80 0000B2 (v03 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.006873] ACPI: DMAR 0x0000000099A49040 000088 (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.006875] ACPI: HPET 0x0000000099A490D0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.006877] ACPI: Reserving FACP table memory at [mem 0x99a46490-0x99a465a3] [ 0.006878] ACPI: Reserving DSDT table memory at [mem 0x99a44280-0x99a4648b] [ 0.006878] ACPI: Reserving FACS table memory at [mem 0x99a44240-0x99a4427f] [ 0.006879] ACPI: Reserving FACS table memory at [mem 0x99a44240-0x99a4427f] [ 0.006880] ACPI: Reserving SSDT table memory at [mem 0x99a465b0-0x99a48e9d] [ 0.006880] ACPI: Reserving MCFG table memory at [mem 0x99a48ea0-0x99a48edb] [ 0.006881] ACPI: Reserving LPIT table memory at [mem 0x99a48ee0-0x99a48f73] [ 0.006882] ACPI: Reserving APIC table memory at [mem 0x99a48f80-0x99a49031] [ 0.006882] ACPI: Reserving DMAR table memory at [mem 0x99a49040-0x99a490c7] [ 0.006883] ACPI: Reserving HPET table memory at [mem 0x99a490d0-0x99a49107] [ 0.006892] ACPI: Local APIC address 0xfee00000 [ 0.007018] No NUMA configuration found [ 0.007019] Faking a node at [mem 0x0000000000000000-0x000000045e7fffff] [ 0.007026] NODE_DATA(0) allocated [mem 0x45e7d6000-0x45e7fffff] [ 0.007291] Zone ranges: [ 0.007291] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.007293] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.007294] Normal [mem 0x0000000100000000-0x000000045e7fffff] [ 0.007295] Device empty [ 0.007296] Movable zone start for each node [ 0.007298] Early memory node ranges [ 0.007298] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.007299] node 0: [mem 0x0000000000100000-0x0000000099a3bfff] [ 0.007300] node 0: [mem 0x0000000100000000-0x000000045e7fffff] [ 0.007302] Initmem setup node 0 [mem 0x0000000000001000-0x000000045e7fffff] [ 0.007303] On node 0 totalpages: 4162011 [ 0.007304] DMA zone: 64 pages used for memmap [ 0.007305] DMA zone: 23 pages reserved [ 0.007305] DMA zone: 3999 pages, LIFO batch:0 [ 0.007306] DMA32 zone: 9769 pages used for memmap [ 0.007307] DMA32 zone: 625212 pages, LIFO batch:63 [ 0.007307] Normal zone: 55200 pages used for memmap [ 0.007308] Normal zone: 3532800 pages, LIFO batch:63 [ 0.007310] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.007335] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.011686] On node 0, zone Normal: 26052 pages in unavailable ranges [ 0.011751] On node 0, zone Normal: 6144 pages in unavailable ranges [ 0.011765] Reserving Intel graphics memory at [mem 0x9b800000-0x9f7fffff] [ 0.012026] ACPI: PM-Timer IO Port: 0x1808 [ 0.012028] ACPI: Local APIC address 0xfee00000 [ 0.012032] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.012069] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-119 [ 0.012070] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.012071] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.012072] ACPI: IRQ0 used by override. [ 0.012073] ACPI: IRQ9 used by override. [ 0.012075] Using ACPI (MADT) for SMP configuration information [ 0.012076] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.012078] TSC deadline timer available [ 0.012079] smpboot: Allowing 12 CPUs, 0 hotplug CPUs [ 0.012088] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.012089] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.012090] PM: hibernation: Registered nosave memory: [mem 0x99a3c000-0xffffffff] [ 0.012092] [mem 0x9f800000-0xdfffffff] available for PCI devices [ 0.012092] Booting paravirtualized kernel on bare hardware [ 0.012094] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.015295] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 [ 0.015515] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.015519] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.015520] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- [ 0.015543] Built 1 zonelists, mobility grouping on. Total pages: 4096955 [ 0.015543] Policy zone: Normal [ 0.015544] Kernel command line: root=UUID=9c9749ba-930e-496f-a2d1-563208d82efa ro quiet splash firmware_class.path=/firmware/ [ 0.016129] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.016408] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.016490] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.027532] Memory: 2582028K/16648044K available (12296K kernel code, 2545K rwdata, 7656K rodata, 2688K init, 17668K bss, 455272K reserved, 0K cma-reserved) [ 0.027992] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.028037] ftrace: allocating 36775 entries in 144 pages [ 0.043174] ftrace: allocated 144 pages with 2 groups [ 0.043307] rcu: Hierarchical RCU implementation. [ 0.043308] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12. [ 0.043309] Rude variant of Tasks RCU enabled. [ 0.043309] Tracing variant of Tasks RCU enabled. [ 0.043310] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.043311] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.046440] NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16 [ 0.046791] random: crng init done [ 0.046807] Console: colour dummy device 80x25 [ 0.046816] printk: console [tty0] enabled [ 0.046827] ACPI: Core revision 20200925 [ 0.046860] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.046918] APIC: Switch to symmetric I/O mode setup [ 0.046919] DMAR: Host address width 39 [ 0.046920] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.046924] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.046925] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.046927] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.046928] DMAR: RMRR base: 0x0000009b000000 end: 0x0000009f7fffff [ 0.046930] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1 [ 0.046931] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.046931] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.049149] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.049150] x2apic enabled [ 0.049171] Switched APIC routing to cluster x2apic. [ 0.055751] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x170fff30cc4, max_idle_ns: 440795237869 ns [ 0.055754] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.92 BogoMIPS (lpj=6399840) [ 0.055792] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.055806] process: using mwait in idle threads [ 0.055808] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.055808] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4 [ 0.055811] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.055812] Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 0.055812] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.055813] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.055814] RETBleed: Mitigation: Enhanced IBRS [ 0.055815] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.055816] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.055818] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.055820] active return thunk: its_return_thunk [ 0.055821] ITS: Mitigation: Aligned branch/return thunks [ 0.055822] VMSCAPE: Mitigation: IBPB before exit to userspace [ 0.055827] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.055827] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.055828] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.055828] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.055829] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.055830] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.055831] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.055831] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.055832] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.059753] Freeing SMP alternatives memory: 32K [ 0.059753] pid_max: default: 32768 minimum: 301 [ 0.059753] LSM: Security Framework initializing [ 0.059753] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.059753] AppArmor: AppArmor initialized [ 0.059753] TOMOYO Linux initialized [ 0.059753] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.059753] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.059753] smpboot: CPU0: Intel(R) Core(TM) i7-10710U CPU @ 1.10GHz (family: 0x6, model: 0xa6, stepping: 0x0) [ 0.059753] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.059753] ... version: 4 [ 0.059753] ... bit width: 48 [ 0.059753] ... generic registers: 4 [ 0.059753] ... value mask: 0000ffffffffffff [ 0.059753] ... max period: 00007fffffffffff [ 0.059753] ... fixed-purpose events: 3 [ 0.059753] ... event mask: 000000070000000f [ 0.059753] rcu: Hierarchical SRCU implementation. [ 0.059753] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.059753] smp: Bringing up secondary CPUs ... [ 0.059753] x86: Booting SMP configuration: [ 0.059753] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 [ 0.059753] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.059753] #7 #8 #9 #10 #11 [ 0.060225] smp: Brought up 1 node, 12 CPUs [ 0.060225] smpboot: Max logical packages: 1 [ 0.060225] smpboot: Total of 12 processors activated (38399.04 BogoMIPS) [ 0.081217] node 0 deferred pages initialised in 16ms [ 0.081219] devtmpfs: initialized [ 0.081219] x86/mm: Memory block size: 128MB [ 0.081219] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.081219] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.081219] pinctrl core: initialized pinctrl subsystem [ 0.081219] NET: Registered protocol family 16 [ 0.081219] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.081219] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.081219] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.081219] audit: initializing netlink subsys (disabled) [ 0.081219] audit: type=2000 audit(1776273786.024:1): state=initialized audit_enabled=0 res=1 [ 0.081219] thermal_sys: Registered thermal governor 'fair_share' [ 0.081219] thermal_sys: Registered thermal governor 'bang_bang' [ 0.081219] thermal_sys: Registered thermal governor 'step_wise' [ 0.081219] thermal_sys: Registered thermal governor 'user_space' [ 0.081219] thermal_sys: Registered thermal governor 'power_allocator' [ 0.081219] cpuidle: using governor ladder [ 0.081219] cpuidle: using governor menu [ 0.081219] ACPI: bus type PCI registered [ 0.081219] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.081219] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.081219] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.081219] PCI: Using configuration type 1 for base access [ 0.084210] Kprobes globally optimized [ 0.084213] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.084213] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.168081] ACPI: Added _OSI(Module Device) [ 0.168081] ACPI: Added _OSI(Processor Device) [ 0.168081] ACPI: Added _OSI(Processor Aggregator Device) [ 0.168081] ACPI: Added _OSI(Linux-Dell-Video) [ 0.168081] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.168081] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.171994] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.173025] ACPI: Interpreter enabled [ 0.173032] ACPI: (supports S0 S3 S4 S5) [ 0.173033] ACPI: Using IOAPIC for interrupt routing [ 0.173044] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.174943] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.174946] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.174966] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.175310] PCI host bridge to bus 0000:00 [ 0.175311] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.175312] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.175313] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] [ 0.175314] pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window] [ 0.175314] pci_bus 0000:00: root bus resource [mem 0x45e800000-0x7fffffffff window] [ 0.175315] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] [ 0.175316] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed47fff window] [ 0.175317] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.175332] pci 0000:00:00.0: [8086:9b51] type 00 class 0x060000 [ 0.175419] pci 0000:00:02.0: [8086:9bca] type 00 class 0x030000 [ 0.175424] pci 0000:00:02.0: reg 0x10: [mem 0xcf000000-0xcfffffff 64bit] [ 0.175428] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.175430] pci 0000:00:02.0: reg 0x20: [io 0xefc0-0xefff] [ 0.175440] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.175517] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.175523] pci 0000:00:04.0: reg 0x10: [mem 0xcebe8000-0xcebeffff 64bit] [ 0.175623] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.175629] pci 0000:00:08.0: reg 0x10: [mem 0x45e802000-0x45e802fff 64bit] [ 0.175755] pci 0000:00:12.0: [8086:02f9] type 00 class 0x118000 [ 0.175772] pci 0000:00:12.0: reg 0x10: [mem 0xcebe1000-0xcebe1fff 64bit] [ 0.175932] pci 0000:00:14.0: [8086:02ed] type 00 class 0x0c0330 [ 0.175946] pci 0000:00:14.0: reg 0x10: [mem 0xcebf0000-0xcebfffff 64bit] [ 0.175999] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.176077] pci 0000:00:14.2: [8086:02ef] type 00 class 0x050000 [ 0.176091] pci 0000:00:14.2: reg 0x10: [mem 0x45e800000-0x45e801fff 64bit] [ 0.176101] pci 0000:00:14.2: reg 0x18: [mem 0x45e803000-0x45e803fff 64bit] [ 0.176236] pci 0000:00:17.0: [8086:02d3] type 00 class 0x010601 [ 0.176249] pci 0000:00:17.0: reg 0x10: [mem 0xcebe2000-0xcebe3fff] [ 0.176256] pci 0000:00:17.0: reg 0x14: [mem 0xcebde000-0xcebde0ff] [ 0.176263] pci 0000:00:17.0: reg 0x18: [io 0xef78-0xef7f] [ 0.176271] pci 0000:00:17.0: reg 0x1c: [io 0xef74-0xef77] [ 0.176277] pci 0000:00:17.0: reg 0x20: [io 0xef80-0xef9f] [ 0.176283] pci 0000:00:17.0: reg 0x24: [mem 0xcebdf000-0xcebdf7ff] [ 0.176318] pci 0000:00:17.0: PME# supported from D3hot [ 0.176408] pci 0000:00:1c.0: [8086:02bf] type 01 class 0x060400 [ 0.176476] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.176498] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity [ 0.176608] pci 0000:00:1d.0: [8086:02b1] type 01 class 0x060400 [ 0.176668] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.176689] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity [ 0.176776] pci 0000:00:1d.4: [8086:02b4] type 01 class 0x060400 [ 0.176837] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold [ 0.176858] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity [ 0.176952] pci 0000:00:1f.0: [8086:0284] type 00 class 0x060100 [ 0.177199] pci 0000:00:1f.3: [8086:02c8] type 00 class 0x040300 [ 0.177232] pci 0000:00:1f.3: reg 0x10: [mem 0xcebe4000-0xcebe7fff 64bit] [ 0.177280] pci 0000:00:1f.3: reg 0x20: [mem 0xcec00000-0xcecfffff 64bit] [ 0.177358] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.177457] pci 0000:00:1f.4: [8086:02a3] type 00 class 0x0c0500 [ 0.177480] pci 0000:00:1f.4: reg 0x10: [mem 0xcebdd000-0xcebdd0ff 64bit] [ 0.177507] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.177599] pci 0000:00:1f.5: [8086:02a4] type 00 class 0x0c8000 [ 0.177612] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.177785] pci 0000:01:00.0: [8086:2723] type 00 class 0x028000 [ 0.177815] pci 0000:01:00.0: reg 0x10: [mem 0xcef00000-0xcef03fff 64bit] [ 0.177955] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.178072] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.178076] pci 0000:00:1c.0: bridge window [mem 0xcef00000-0xceffffff] [ 0.178123] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.178140] pci 0000:02:00.0: reg 0x10: [io 0xf000-0xf0ff] [ 0.178164] pci 0000:02:00.0: reg 0x18: [mem 0xcee04000-0xcee04fff 64bit] [ 0.178179] pci 0000:02:00.0: reg 0x20: [mem 0xcee00000-0xcee03fff 64bit] [ 0.178278] pci 0000:02:00.0: supports D1 D2 [ 0.178278] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.178416] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.178418] pci 0000:00:1d.0: bridge window [io 0xf000-0xffff] [ 0.178420] pci 0000:00:1d.0: bridge window [mem 0xcee00000-0xceefffff] [ 0.178462] pci 0000:03:00.0: [144d:a808] type 00 class 0x010802 [ 0.178480] pci 0000:03:00.0: reg 0x10: [mem 0xced00000-0xced03fff 64bit] [ 0.178680] pci 0000:00:1d.4: PCI bridge to [bus 03] [ 0.178684] pci 0000:00:1d.4: bridge window [mem 0xced00000-0xcedfffff] [ 0.179013] iommu: Default domain type: Translated [ 0.179022] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.179022] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.179022] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.179022] vgaarb: loaded [ 0.179022] EDAC MC: Ver: 3.0.0 [ 0.179022] NetLabel: Initializing [ 0.179022] NetLabel: domain hash size = 128 [ 0.179022] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.179022] NetLabel: unlabeled traffic allowed by default [ 0.179022] PCI: Using ACPI for IRQ routing [ 0.218697] PCI: pci_cache_line_size set to 64 bytes [ 0.218778] e820: reserve RAM buffer [mem 0x99a3c000-0x9bffffff] [ 0.218779] e820: reserve RAM buffer [mem 0x45e800000-0x45fffffff] [ 0.219753] clocksource: Switched to clocksource tsc-early [ 0.226029] VFS: Disk quotas dquot_6.6.0 [ 0.226040] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.226110] AppArmor: AppArmor Filesystem Enabled [ 0.226120] pnp: PnP ACPI init [ 0.226178] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.226182] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.226237] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.226238] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.226239] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.226240] system 00:01: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.226241] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.226242] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.226243] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.226245] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.226271] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.226273] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.226292] system 00:03: [io 0x1800-0x18fe] has been reserved [ 0.226294] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.226303] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.226353] pnp: PnP ACPI: found 5 devices [ 0.231590] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.231628] NET: Registered protocol family 2 [ 0.231727] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.233021] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.233094] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.233207] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.233260] TCP: Hash tables configured (established 131072 bind 65536) [ 0.233289] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.233317] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.233353] NET: Registered protocol family 1 [ 0.233356] NET: Registered protocol family 44 [ 0.233363] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.233367] pci 0000:00:1c.0: bridge window [mem 0xcef00000-0xceffffff] [ 0.233372] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.233374] pci 0000:00:1d.0: bridge window [io 0xf000-0xffff] [ 0.233376] pci 0000:00:1d.0: bridge window [mem 0xcee00000-0xceefffff] [ 0.233380] pci 0000:00:1d.4: PCI bridge to [bus 03] [ 0.233382] pci 0000:00:1d.4: bridge window [mem 0xced00000-0xcedfffff] [ 0.233387] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.233388] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.233388] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window] [ 0.233389] pci_bus 0000:00: resource 7 [mem 0x9f800000-0xdfffffff window] [ 0.233390] pci_bus 0000:00: resource 8 [mem 0x45e800000-0x7fffffffff window] [ 0.233391] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window] [ 0.233391] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed47fff window] [ 0.233392] pci_bus 0000:01: resource 1 [mem 0xcef00000-0xceffffff] [ 0.233393] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] [ 0.233394] pci_bus 0000:02: resource 1 [mem 0xcee00000-0xceefffff] [ 0.233394] pci_bus 0000:03: resource 1 [mem 0xced00000-0xcedfffff] [ 0.233424] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.233724] PCI: CLS 64 bytes, default 64 [ 0.233748] Trying to unpack rootfs image as initramfs... [ 0.732661] Freeing initrd memory: 50060K [ 0.732688] DMAR: No ATSR found [ 0.732722] DMAR: dmar0: Using Queued invalidation [ 0.732724] DMAR: dmar1: Using Queued invalidation [ 0.733222] pci 0000:00:00.0: Adding to iommu group 0 [ 0.733228] pci 0000:00:02.0: Adding to iommu group 1 [ 0.733233] pci 0000:00:04.0: Adding to iommu group 2 [ 0.733238] pci 0000:00:08.0: Adding to iommu group 3 [ 0.733245] pci 0000:00:12.0: Adding to iommu group 4 [ 0.733254] pci 0000:00:14.0: Adding to iommu group 5 [ 0.733258] pci 0000:00:14.2: Adding to iommu group 5 [ 0.733263] pci 0000:00:17.0: Adding to iommu group 6 [ 0.733271] pci 0000:00:1c.0: Adding to iommu group 7 [ 0.733277] pci 0000:00:1d.0: Adding to iommu group 8 [ 0.733285] pci 0000:00:1d.4: Adding to iommu group 9 [ 0.733297] pci 0000:00:1f.0: Adding to iommu group 10 [ 0.733302] pci 0000:00:1f.3: Adding to iommu group 10 [ 0.733307] pci 0000:00:1f.4: Adding to iommu group 10 [ 0.733312] pci 0000:00:1f.5: Adding to iommu group 10 [ 0.733320] pci 0000:01:00.0: Adding to iommu group 11 [ 0.733326] pci 0000:02:00.0: Adding to iommu group 12 [ 0.733332] pci 0000:03:00.0: Adding to iommu group 13 [ 0.735119] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.735120] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.735121] software IO TLB: mapped [mem 0x0000000095a3c000-0x0000000099a3c000] (64MB) [ 0.735502] Initialise system trusted keyrings [ 0.735507] Key type blacklist registered [ 0.735539] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.736234] zbud: loaded [ 0.736334] integrity: Platform Keyring initialized [ 0.736336] Key type asymmetric registered [ 0.736336] Asymmetric key parser 'x509' registered [ 0.736342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.736371] io scheduler mq-deadline registered [ 0.738894] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.739077] pcieport 0000:00:1d.0: PME: Signaling with IRQ 123 [ 0.739253] pcieport 0000:00:1d.4: PME: Signaling with IRQ 124 [ 0.739315] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.739322] efifb: probing for efifb [ 0.739334] efifb: framebuffer at 0xd0000000, using 4128k, total 4128k [ 0.739335] efifb: mode is 1366x768x32, linelength=5504, pages=1032 [ 0.739335] efifb: scrolling: redraw [ 0.739336] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.739384] Console: switching to colour frame buffer device 170x48 [ 0.740610] fb0: EFI VGA frame buffer device [ 0.740614] intel_idle: MWAIT substates: 0x11142120 [ 0.740626] Monitor-Mwait will be used to enter C-1 state [ 0.740631] Monitor-Mwait will be used to enter C-2 state [ 0.740634] Monitor-Mwait will be used to enter C-3 state [ 0.740637] ACPI: \_SB_.CP00: Found 3 idle states [ 0.740638] intel_idle: v0.5.1 model 0xA6 [ 0.740879] intel_idle: Local APIC timer is reliable in all C-states [ 0.741357] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.741651] hpet_acpi_add: no address or irqs in _CRS [ 0.741660] Linux agpgart interface v0.103 [ 0.741680] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.742063] i8042: PNP: No PS/2 controller found. [ 0.742260] mousedev: PS/2 mouse device common for all mice [ 0.742270] rtc_cmos 00:04: RTC can wake from S4 [ 0.743202] rtc_cmos 00:04: registered as rtc0 [ 0.743447] rtc_cmos 00:04: setting system clock to 2026-04-15T17:23:07 UTC (1776273787) [ 0.743468] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram [ 0.743472] intel_pstate: HWP enabled by BIOS [ 0.743473] intel_pstate: Intel P-state driver initializing [ 0.744072] intel_pstate: HWP enabled [ 0.744118] ledtrig-cpu: registered to indicate activity on CPUs [ 0.744277] NET: Registered protocol family 10 [ 0.748606] Segment Routing with IPv6 [ 0.748619] mip6: Mobile IPv6 [ 0.748620] NET: Registered protocol family 17 [ 0.748640] mpls_gso: MPLS GSO support [ 0.749390] microcode: sig=0xa0660, pf=0x80, revision=0xfa [ 0.749720] microcode: Microcode Update Driver: v2.2. [ 0.749722] IPI shorthand broadcast: enabled [ 0.749731] sched_clock: Marking stable (740351885, 8976976)->(772171897, -22843036) [ 0.750024] registered taskstats version 1 [ 0.750026] Loading compiled-in X.509 certificates [ 0.769173] Loaded X.509 cert 'Build time autogenerated kernel key: 238e5341730d5de797ad0e5a9216be89b6799157' [ 0.769197] zswap: loaded using pool lzo/zbud [ 0.769737] Key type .fscrypt registered [ 0.769738] Key type fscrypt-provisioning registered [ 0.769758] AppArmor: AppArmor sha1 policy hashing enabled [ 0.769858] clk: Disabling unused clocks [ 0.770638] Freeing unused decrypted memory: 2036K [ 0.771011] Freeing unused kernel image (initmem) memory: 2688K [ 0.841283] Write protecting the kernel read-only data: 22528k [ 0.842562] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.842784] Freeing unused kernel image (rodata/data gap) memory: 536K [ 0.852574] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.852577] Run /init as init process [ 0.852578] with arguments: [ 0.852578] /init [ 0.852579] splash [ 0.852579] with environment: [ 0.852579] HOME=/ [ 0.852580] TERM=linux [ 0.922120] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.935427] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.935486] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.935644] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 0.936051] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 0.937010] cryptd: max_cpu_qlen set to 1000 [ 0.941032] ACPI: Power Button [PWRF] [ 0.946393] SCSI subsystem initialized [ 0.946985] AVX2 version of gcm_enc/dec engaged. [ 0.946986] AES CTR mode by8 optimization enabled [ 0.952963] ACPI: bus type USB registered [ 0.952991] usbcore: registered new interface driver usbfs [ 0.953001] usbcore: registered new interface driver hub [ 0.953018] usbcore: registered new device driver usb [ 0.966280] ACPI: bus type drm_connector registered [ 0.966513] libata version 3.00 loaded. [ 0.972040] r8169 0000:02:00.0 eth0: RTL8168h/8111h, 00:e7:43:0e:83:4d, XID 541, IRQ 125 [ 0.972044] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 0.973434] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.973441] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.974098] ahci 0000:00:17.0: version 3.0 [ 0.974538] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x1 impl SATA mode [ 0.974542] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part deso sadm sds apst [ 0.974607] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 0.974613] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.974897] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.974905] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.974911] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.974958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 0.974959] scsi host0: ahci [ 0.974963] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.974965] usb usb1: Product: xHCI Host Controller [ 0.974967] usb usb1: Manufacturer: Linux 5.10.0-39-amd64 xhci-hcd [ 0.974968] usb usb1: SerialNumber: 0000:00:14.0 [ 0.975147] hub 1-0:1.0: USB hub found [ 0.975169] hub 1-0:1.0: 12 ports detected [ 0.975233] scsi host1: ahci [ 0.975331] ata1: SATA max UDMA/133 abar m2048@0xcebdf000 port 0xcebdf100 irq 126 [ 0.975333] ata2: DUMMY [ 0.975769] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 0.975772] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.975773] usb usb2: Product: xHCI Host Controller [ 0.975775] usb usb2: Manufacturer: Linux 5.10.0-39-amd64 xhci-hcd [ 0.975776] usb usb2: SerialNumber: 0000:00:14.0 [ 0.975899] hub 2-0:1.0: USB hub found [ 0.975912] hub 2-0:1.0: 6 ports detected [ 0.977539] nvme nvme0: pci function 0000:03:00.0 [ 0.979550] r8169 0000:02:00.0 eno0: renamed from eth0 [ 0.981803] nvme nvme0: missing or invalid SUBNQN field. [ 0.981819] nvme nvme0: Shutdown timeout set to 8 seconds [ 0.996553] nvme nvme0: 12/0/0 default/read/poll queues [ 0.997780] nvme0n1: detected capacity change from 0 to 1000204886016 [ 0.997958] nvme0n1: p1 p2 [ 1.233449] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.292343] ata1: SATA link down (SStatus 4 SControl 300) [ 1.383506] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 1.383509] checking generic (d0000000 408000) vs hw (cf000000 1000000) [ 1.383509] checking generic (d0000000 408000) vs hw (d0000000 10000000) [ 1.383510] fb0: switching to inteldrmfb from EFI VGA [ 1.383611] Console: switching to colour dummy device 80x25 [ 1.383637] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.399126] usb 1-1: New USB device found, idVendor=0e8d, idProduct=1887, bcdDevice= 0.00 [ 1.399127] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.399128] usb 1-1: Product: Portable Super Multi Drive [ 1.399129] usb 1-1: Manufacturer: Hitachi-LG Data Storage Inc [ 1.399129] usb 1-1: SerialNumber: M0721163244 [ 1.436941] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.436968] i915 0000:00:02.0: firmware: failed to load i915/kbl_dmc_ver1_04.bin (-2) [ 1.436971] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 1.436972] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2 [ 1.436974] i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management. [ 1.436975] i915 0000:00:02.0: [drm] DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [ 1.533412] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.685179] usb 1-4: New USB device found, idVendor=1058, idProduct=25a1, bcdDevice=10.12 [ 1.685180] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.685181] usb 1-4: Product: Elements 25A1 [ 1.685181] usb 1-4: Manufacturer: Western Digital [ 1.685182] usb 1-4: SerialNumber: 575847314133373558594338 [ 1.749415] tsc: Refined TSC clocksource calibration: 1607.999 MHz [ 1.749420] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x172da94f0e2, max_idle_ns: 440795278248 ns [ 1.749464] clocksource: Switched to clocksource tsc [ 1.813399] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 1.969047] usb 1-6: New USB device found, idVendor=21c4, idProduct=0809, bcdDevice= 2.00 [ 1.969049] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 1.969050] usb 1-6: Product: USB Flash Drive [ 1.969050] usb 1-6: Manufacturer: Lexar [ 1.969051] usb 1-6: SerialNumber: 9258683615082269 [ 2.097394] usb 1-7: new full-speed USB device number 5 using xhci_hcd [ 2.225479] usb 1-7: device descriptor read/64, error -71 [ 2.464994] usb 1-7: device descriptor read/64, error -71 [ 2.654822] i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP [ 2.695814] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0 [ 2.708984] usb 1-7: new full-speed USB device number 6 using xhci_hcd [ 2.841488] usb 1-7: device descriptor read/64, error -71 [ 2.920431] fbcon: i915drmfb (fb0) is primary device [ 3.080991] usb 1-7: device descriptor read/64, error -71 [ 3.189035] usb usb1-port7: attempt power cycle [ 3.213508] Console: switching to colour frame buffer device 170x48 [ 3.231573] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 3.601300] usb 1-7: new full-speed USB device number 7 using xhci_hcd [ 3.601516] usb 1-7: Device not responding to setup address. [ 3.810196] usb 1-7: Device not responding to setup address. [ 4.017398] usb 1-7: device not accepting address 7, error -71 [ 4.145400] usb 1-7: new full-speed USB device number 8 using xhci_hcd [ 4.146198] usb 1-7: Device not responding to setup address. [ 4.354192] usb 1-7: Device not responding to setup address. [ 4.561294] usb 1-7: device not accepting address 8, error -71 [ 4.561514] usb usb1-port7: unable to enumerate USB device [ 4.566717] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.567034] scsi host2: usb-storage 1-1:1.0 [ 4.567089] usb-storage 1-4:1.0: USB Mass Storage device detected [ 4.567354] scsi host3: usb-storage 1-4:1.0 [ 4.567405] usb-storage 1-6:1.0: USB Mass Storage device detected [ 4.567527] scsi host4: usb-storage 1-6:1.0 [ 4.567581] usbcore: registered new interface driver usb-storage [ 4.569695] usbcore: registered new interface driver uas [ 4.583215] librem_ec_acpi: loading out-of-tree module taints kernel. [ 4.583229] librem_ec_acpi: module verification failed: signature and/or required key missing - tainting kernel [ 5.338984] device-mapper: uevent: version 1.0.3 [ 5.339118] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: [email protected] [ 5.590645] scsi 4:0:0:0: Direct-Access Lexar USB Flash Drive PQ: 0 ANSI: 4 [ 5.590748] scsi 3:0:0:0: Direct-Access WD Elements 25A1 1012 PQ: 0 ANSI: 6 [ 5.593647] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GP60NB50 RF02 PQ: 0 ANSI: 0 [ 5.594414] sd 4:0:0:0: [sdb] 243404800 512-byte logical blocks: (125 GB/116 GiB) [ 5.594532] sd 3:0:0:0: [sda] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 5.594569] sd 4:0:0:0: [sdb] Write Protect is off [ 5.594570] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 5.594699] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.594706] sdb: detected capacity change from 0 to 124623257600 [ 5.594907] sd 3:0:0:0: [sda] Write Protect is off [ 5.594908] sd 3:0:0:0: [sda] Mode Sense: 53 00 10 08 [ 5.595219] sd 3:0:0:0: [sda] No Caching mode page found [ 5.595221] sd 3:0:0:0: [sda] Assuming drive cache: write through [ 5.595227] sda: detected capacity change from 0 to 2000365289472 [ 5.630379] sdb: detected capacity change from 0 to 124623257600 [ 5.636359] sdb: sdb1 [ 5.638768] sda: detected capacity change from 0 to 2000365289472 [ 5.678301] sdb: detected capacity change from 0 to 124623257600 [ 5.678306] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 10.991870] sda: sda1 [ 11.006749] sda: detected capacity change from 0 to 2000365289472 [ 11.006754] sd 3:0:0:0: [sda] Attached SCSI disk [ 11.016522] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 11.016532] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 11.085348] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 11.905090] usb 1-3: new high-speed USB device number 9 using xhci_hcd [ 12.058935] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.56 [ 12.058936] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.058937] usb 1-3: Product: USB2.1 Hub [ 12.058938] usb 1-3: Manufacturer: GenesysLogic [ 12.059594] hub 1-3:1.0: USB hub found [ 12.059974] hub 1-3:1.0: 4 ports detected [ 12.181710] usb 2-6: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 12.205878] usb 2-6: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.56 [ 12.205892] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.205900] usb 2-6: Product: USB3.1 Hub [ 12.205906] usb 2-6: Manufacturer: GenesysLogic [ 12.208006] hub 2-6:1.0: USB hub found [ 12.208328] hub 2-6:1.0: 4 ports detected [ 12.377381] usb 1-3.2: new full-speed USB device number 10 using xhci_hcd [ 12.508699] usb 1-3.2: New USB device found, idVendor=047d, idProduct=8018, bcdDevice= 1.02 [ 12.508700] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.508701] usb 1-3.2: Product: Expert Wireless TB [ 12.508702] usb 1-3.2: Manufacturer: Kensington [ 12.524415] hid: raw HID events driver (C) Jiri Kosina [ 12.530336] usbcore: registered new interface driver usbhid [ 12.530338] usbhid: USB HID core driver [ 12.531763] input: Kensington Expert Wireless TB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:047D:8018.0001/input/input1 [ 12.531804] input: Kensington Expert Wireless TB Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:047D:8018.0001/input/input2 [ 12.589410] hid-generic 0003:047D:8018.0001: input,hidraw0: USB HID v1.11 Mouse [Kensington Expert Wireless TB] on usb-0000:00:14.0-3.2/input0 [ 12.589672] hid-generic 0003:047D:8018.0002: hiddev0,hidraw1: USB HID v1.10 Device [Kensington Expert Wireless TB] on usb-0000:00:14.0-3.2/input1 [ 12.621292] usb 1-3.3: new high-speed USB device number 11 using xhci_hcd [ 13.308570] usb 1-3.3: New USB device found, idVendor=046d, idProduct=08e5, bcdDevice= 0.21 [ 13.308572] usb 1-3.3: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 13.308573] usb 1-3.3: Product: HD Pro Webcam C920 [ 13.308573] usb 1-3.3: SerialNumber: E155B71F [ 13.413398] usb 1-3.4: new full-speed USB device number 12 using xhci_hcd [ 13.544300] usb 1-3.4: New USB device found, idVendor=3297, idProduct=4976, bcdDevice= 1.00 [ 13.544302] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.544303] usb 1-3.4: Product: Ergodox EZ [ 13.544303] usb 1-3.4: Manufacturer: ZSA Technology Labs [ 13.544304] usb 1-3.4: SerialNumber: default/latest [ 13.557004] input: ZSA Technology Labs Ergodox EZ as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/0003:3297:4976.0003/input/input3 [ 13.617480] hid-generic 0003:3297:4976.0003: input,hidraw2: USB HID v1.11 Keyboard [ZSA Technology Labs Ergodox EZ] on usb-0000:00:14.0-3.4/input0 [ 13.618770] input: ZSA Technology Labs Ergodox EZ as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.1/0003:3297:4976.0004/input/input4 [ 13.618815] hid-generic 0003:3297:4976.0004: input,hidraw3: USB HID v1.11 Mouse [ZSA Technology Labs Ergodox EZ] on usb-0000:00:14.0-3.4/input1 [ 13.621056] input: ZSA Technology Labs Ergodox EZ System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.2/0003:3297:4976.0005/input/input5 [ 13.681442] input: ZSA Technology Labs Ergodox EZ Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.2/0003:3297:4976.0005/input/input6 [ 13.681460] input: ZSA Technology Labs Ergodox EZ Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.2/0003:3297:4976.0005/input/input7 [ 13.681528] hid-generic 0003:3297:4976.0005: input,hidraw4: USB HID v1.11 Keyboard [ZSA Technology Labs Ergodox EZ] on usb-0000:00:14.0-3.4/input2 [ 26.213598] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 26.237290] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 26.278153] systemd[1]: Inserted module 'autofs4' [ 26.287455] systemd[1]: systemd 247.3-7+deb11u7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 26.305428] systemd[1]: Detected architecture x86-64. [ 26.305764] systemd[1]: Set hostname to <Ycarus>. [ 26.396328] zram: Added device: zram0 [ 26.444475] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 26.455056] systemd[1]: Queued start job for default target Graphical Interface. [ 26.456127] systemd[1]: Created slice system-getty.slice. [ 26.456311] systemd[1]: Created slice system-modprobe.slice. [ 26.456490] systemd[1]: Created slice Cryptsetup Units Slice. [ 26.456642] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 26.456804] systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice. [ 26.456943] systemd[1]: Created slice User and Session Slice. [ 26.456994] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 26.457082] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 26.457133] systemd[1]: Reached target User and Group Name Lookups. [ 26.457144] systemd[1]: Reached target Remote File Systems. [ 26.457151] systemd[1]: Reached target Slices. [ 26.457206] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 26.457262] systemd[1]: Listening on LVM2 poll daemon socket. [ 26.457311] systemd[1]: Listening on Syslog Socket. [ 26.457358] systemd[1]: Listening on fsck to fsckd communication Socket. [ 26.457392] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 26.457470] systemd[1]: Listening on Journal Audit Socket. [ 26.457515] systemd[1]: Listening on Journal Socket (/dev/log). [ 26.457568] systemd[1]: Listening on Journal Socket. [ 26.457749] systemd[1]: Listening on udev Control Socket. [ 26.457795] systemd[1]: Listening on udev Kernel Socket. [ 26.458219] systemd[1]: Mounting Huge Pages File System... [ 26.458651] systemd[1]: Mounting POSIX Message Queue File System... [ 26.459158] systemd[1]: Mounting Kernel Debug File System... [ 26.459637] systemd[1]: Mounting Kernel Trace File System... [ 26.459771] systemd[1]: Finished Availability of block devices. [ 26.460701] systemd[1]: Starting Set the console keyboard layout... [ 26.461370] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 26.462023] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 26.462515] systemd[1]: Starting Load Kernel Module configfs... [ 26.463128] systemd[1]: Starting Load Kernel Module drm... [ 26.463774] systemd[1]: Starting Load Kernel Module fuse... [ 26.464210] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 26.464253] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 26.465498] systemd[1]: Starting Journal Service... [ 26.466594] systemd[1]: Starting Load Kernel Modules... [ 26.467443] systemd[1]: Starting Remount Root and Kernel File Systems... [ 26.468239] systemd[1]: Starting Coldplug All udev Devices... [ 26.469674] systemd[1]: Mounted Huge Pages File System. [ 26.469774] systemd[1]: Mounted POSIX Message Queue File System. [ 26.469885] systemd[1]: Mounted Kernel Debug File System. [ 26.469982] systemd[1]: Mounted Kernel Trace File System. [ 26.470277] systemd[1]: Finished Set the console keyboard layout. [ 26.470595] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 26.470800] systemd[1]: [email protected]: Succeeded. [ 26.470959] systemd[1]: Finished Load Kernel Module configfs. [ 26.471147] systemd[1]: [email protected]: Succeeded. [ 26.471301] systemd[1]: Finished Load Kernel Module drm. [ 26.472206] systemd[1]: Mounting Kernel Configuration File System... [ 26.474145] systemd[1]: Mounted Kernel Configuration File System. [ 26.475509] fuse: init (API version 7.32) [ 26.475956] systemd[1]: [email protected]: Succeeded. [ 26.476104] systemd[1]: Finished Load Kernel Module fuse. [ 26.476255] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 26.477214] systemd[1]: Mounting FUSE Control File System... [ 26.478179] systemd[1]: Finished Remount Root and Kernel File Systems. [ 26.478563] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 26.478596] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 26.479233] systemd[1]: Starting Load/Save Random Seed... [ 26.479916] systemd[1]: Starting Create System Users... [ 26.480595] systemd[1]: Mounted FUSE Control File System. [ 26.480970] lp: driver loaded but no devices found [ 26.483797] ppdev: user-space parallel port driver [ 26.486399] systemd[1]: Finished Create System Users. [ 26.487054] systemd[1]: Starting Create Static Device Nodes in /dev... [ 26.490141] systemd[1]: Finished Load/Save Random Seed. [ 26.490274] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 26.491167] systemd[1]: Finished Load Kernel Modules. [ 26.491951] systemd[1]: Starting Apply Kernel Variables... [ 26.497513] systemd[1]: Finished Create Static Device Nodes in /dev. [ 26.497783] systemd[1]: Finished Apply Kernel Variables. [ 26.499004] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 26.520759] systemd[1]: Finished Coldplug All udev Devices. [ 26.521649] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 26.522260] systemd[1]: Starting Wait for udev To Complete Device Initialization... [ 26.524131] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 26.527613] systemd[1]: Started Journal Service. [ 26.531757] systemd-journald[469]: Received client request to flush runtime journal. [ 26.599169] intel_pmc_core INT33A1:00: initialized [ 26.605269] ACPI: AC Adapter [AC] (on-line) [ 26.634200] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 26.634250] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 26.634293] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 26.636126] mc: Linux media interface: v0.10 [ 26.681583] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 26.682178] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 26.703382] zram0: detected capacity change from 0 to 8589934592 [ 26.727555] iTCO_vendor_support: vendor-support=0 [ 26.727948] intel_rapl_common: Found RAPL domain package [ 26.727950] intel_rapl_common: Found RAPL domain core [ 26.727952] intel_rapl_common: Found RAPL domain uncore [ 26.727953] intel_rapl_common: Found RAPL domain dram [ 26.728552] videodev: Linux video capture interface: v2.00 [ 26.741289] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 26.741321] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 26.751214] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 26.752071] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 26.752361] cfg80211: Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 26.752627] cfg80211: Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 26.752847] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 26.753120] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 26.753628] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 26.753779] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 26.759384] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSFS [ 26.762049] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:08e5) [ 26.763261] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 26.763262] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 26.763263] RAPL PMU: hw unit of domain package 2^-14 Joules [ 26.763264] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 26.763265] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 26.763723] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/input/input9 [ 26.763796] usbcore: registered new interface driver uvcvideo [ 26.763797] USB Video Class driver (1.1.1) [ 26.769088] Intel(R) Wireless WiFi driver for Linux [ 26.795032] iwlwifi 0000:01:00.0: firmware: direct-loading firmware iwlwifi-cc-a0-59.ucode [ 26.795045] iwlwifi 0000:01:00.0: api flags index 2 larger than supported by driver [ 26.795063] iwlwifi 0000:01:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.22 [ 26.795426] iwlwifi 0000:01:00.0: loaded firmware version 59.601f3a66.0 cc-a0-59.ucode op_mode iwlmvm [ 26.795450] iwlwifi 0000:01:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2) [ 26.866501] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 26.911815] iwlwifi 0000:01:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [ 26.923188] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:hp [ 26.923190] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 26.923191] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 26.923192] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 26.923193] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 26.923194] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 26.936172] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 26.936206] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 26.936235] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 26.936262] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 26.936290] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 26.936320] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 26.936345] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 27.077141] loop: module loaded [ 27.077505] loop0: detected capacity change from 0 to 110080000 [ 27.077585] loop1: detected capacity change from 0 to 58183680 [ 27.095070] iwlwifi 0000:01:00.0: base HW address: 98:##:##:##:##:## [ 27.107763] thermal thermal_zone2: failed to read out thermal zone (-61) [ 27.109323] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 27.132864] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 27.153377] loop2: detected capacity change from 0 to 110247936 [ 27.181380] loop3: detected capacity change from 0 to 83968000 [ 27.229378] loop4: detected capacity change from 0 to 50421760 [ 27.269675] loop5: detected capacity change from 0 to 58183680 [ 27.311772] usbcore: registered new interface driver snd-usb-audio [ 27.313285] loop6: detected capacity change from 0 to 50716672 [ 28.052481] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 28.074463] audit: type=1400 audit(1776273814.826:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=728 comm="apparmor_parser" [ 28.076381] audit: type=1400 audit(1776273814.826:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=718 comm="apparmor_parser" [ 28.076386] audit: type=1400 audit(1776273814.826:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=718 comm="apparmor_parser" [ 28.076390] audit: type=1400 audit(1776273814.826:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=718 comm="apparmor_parser" [ 28.077145] audit: type=1400 audit(1776273814.830:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=723 comm="apparmor_parser" [ 28.077372] audit: type=1400 audit(1776273814.830:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mdnsd" pid=729 comm="apparmor_parser" [ 28.077419] audit: type=1400 audit(1776273814.830:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="avahi-daemon" pid=725 comm="apparmor_parser" [ 28.079513] audit: type=1400 audit(1776273814.830:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=720 comm="apparmor_parser" [ 28.079764] audit: type=1400 audit(1776273814.830:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=721 comm="apparmor_parser" [ 28.080839] audit: type=1400 audit(1776273814.830:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="smbd" pid=727 comm="apparmor_parser" [ 29.634254] input: BRLTTY 6.3 Linux Screen Driver Keyboard as /devices/virtual/input/input17 [ 29.641314] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18 [ 29.769564] loop7: detected capacity change from 0 to 4096 [ 30.162709] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168h-2.fw (-2) [ 30.162714] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2 [ 30.162716] r8169 0000:02:00.0: Unable to load firmware rtl_nic/rtl8168h-2.fw (-2) [ 30.189023] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-200:00, irq=IGNORE) [ 30.313132] r8169 0000:02:00.0 eno0: Link is Down [ 31.677179] usb 1-3.3: reset high-speed USB device number 11 using xhci_hcd [ 33.138498] rfkill: input handler disabled [ 37.062780] wlp1s0: authenticate with 0c:ef:15:7a:80:07 [ 37.065333] wlp1s0: send auth to 0c:ef:15:7a:80:07 (try 1/3) [ 37.187499] wlp1s0: authenticated [ 37.189045] wlp1s0: associate with 0c:ef:15:7a:80:07 (try 1/3) [ 37.206799] wlp1s0: RX AssocResp from 0c:ef:15:7a:80:07 (capab=0x1511 status=0 aid=3) [ 37.210662] wlp1s0: associated [ 37.237128] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 37.314031] wlp1s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 0c:ef:15:7a:80:07 [ 37.472171] kauditd_printk_skb: 47 callbacks suppressed [ 37.472172] audit: type=1400 audit(1776273824.222:59): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1805 comm="apparmor_parser" [ 37.830542] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 37.832661] Bridge firewalling registered [ 38.052915] Initializing XFRM netlink socket [ 39.304989] br-87e30427c73a: port 1(veth239fad8) entered blocking state [ 39.304993] br-87e30427c73a: port 1(veth239fad8) entered disabled state [ 39.305084] device veth239fad8 entered promiscuous mode [ 39.305267] br-87e30427c73a: port 1(veth239fad8) entered blocking state [ 39.305270] br-87e30427c73a: port 1(veth239fad8) entered forwarding state [ 39.306340] br-87e30427c73a: port 1(veth239fad8) entered disabled state [ 39.306622] br-9d1af4418840: port 1(veth0acfe40) entered blocking state [ 39.306624] br-9d1af4418840: port 1(veth0acfe40) entered disabled state [ 39.307796] device veth0acfe40 entered promiscuous mode [ 39.308381] br-9d1af4418840: port 1(veth0acfe40) entered blocking state [ 39.308384] br-9d1af4418840: port 1(veth0acfe40) entered forwarding state [ 39.308510] br-9d1af4418840: port 1(veth0acfe40) entered disabled state [ 39.356893] br-ef5229a54bf7: port 1(vethaf6446c) entered blocking state [ 39.356895] br-ef5229a54bf7: port 1(vethaf6446c) entered disabled state [ 39.356959] device vethaf6446c entered promiscuous mode [ 39.357128] br-ef5229a54bf7: port 1(vethaf6446c) entered blocking state [ 39.357130] br-ef5229a54bf7: port 1(vethaf6446c) entered forwarding state [ 39.357189] br-ef5229a54bf7: port 1(vethaf6446c) entered disabled state [ 39.367905] br-9d1af4418840: port 2(veth49aca89) entered blocking state [ 39.367909] br-9d1af4418840: port 2(veth49aca89) entered disabled state [ 39.368030] device veth49aca89 entered promiscuous mode [ 39.368144] br-9d1af4418840: port 2(veth49aca89) entered blocking state [ 39.368146] br-9d1af4418840: port 2(veth49aca89) entered forwarding state [ 39.368194] IPv6: ADDRCONF(NETDEV_CHANGE): br-9d1af4418840: link becomes ready [ 39.368342] br-9d1af4418840: port 2(veth49aca89) entered disabled state [ 39.369127] br-a3b5a3ee7163: port 1(veth1c5eb93) entered blocking state [ 39.369130] br-a3b5a3ee7163: port 1(veth1c5eb93) entered disabled state [ 39.369211] device veth1c5eb93 entered promiscuous mode [ 39.369339] br-a3b5a3ee7163: port 1(veth1c5eb93) entered blocking state [ 39.369342] br-a3b5a3ee7163: port 1(veth1c5eb93) entered forwarding state [ 39.369418] br-a3b5a3ee7163: port 1(veth1c5eb93) entered disabled state [ 39.372700] br-87e30427c73a: port 2(veth5205fcd) entered blocking state [ 39.372704] br-87e30427c73a: port 2(veth5205fcd) entered disabled state [ 39.373257] device veth5205fcd entered promiscuous mode [ 39.373354] br-87e30427c73a: port 2(veth5205fcd) entered blocking state [ 39.373356] br-87e30427c73a: port 2(veth5205fcd) entered forwarding state [ 39.373444] IPv6: ADDRCONF(NETDEV_CHANGE): br-87e30427c73a: link becomes ready [ 39.373582] br-87e30427c73a: port 2(veth5205fcd) entered disabled state [ 39.467224] br-9d1af4418840: port 3(veth85bb007) entered blocking state [ 39.467227] br-9d1af4418840: port 3(veth85bb007) entered disabled state [ 39.467295] device veth85bb007 entered promiscuous mode [ 39.467375] br-9d1af4418840: port 3(veth85bb007) entered blocking state [ 39.467377] br-9d1af4418840: port 3(veth85bb007) entered forwarding state [ 39.572040] br-87e30427c73a: port 3(vethd8a0367) entered blocking state [ 39.572042] br-87e30427c73a: port 3(vethd8a0367) entered disabled state [ 39.572101] device vethd8a0367 entered promiscuous mode [ 39.572175] br-87e30427c73a: port 3(vethd8a0367) entered blocking state [ 39.572177] br-87e30427c73a: port 3(vethd8a0367) entered forwarding state [ 39.684095] br-87e30427c73a: port 4(veth7a1290c) entered blocking state [ 39.684097] br-87e30427c73a: port 4(veth7a1290c) entered disabled state [ 39.684152] device veth7a1290c entered promiscuous mode [ 39.684220] br-87e30427c73a: port 4(veth7a1290c) entered blocking state [ 39.684222] br-87e30427c73a: port 4(veth7a1290c) entered forwarding state [ 39.691124] br-9d1af4418840: port 4(veth533f220) entered blocking state [ 39.691128] br-9d1af4418840: port 4(veth533f220) entered disabled state [ 39.691207] device veth533f220 entered promiscuous mode [ 39.691313] br-9d1af4418840: port 4(veth533f220) entered blocking state [ 39.691316] br-9d1af4418840: port 4(veth533f220) entered forwarding state [ 39.747215] br-87e30427c73a: port 5(veth8a3e17d) entered blocking state [ 39.747219] br-87e30427c73a: port 5(veth8a3e17d) entered disabled state [ 39.747298] device veth8a3e17d entered promiscuous mode [ 39.747398] br-87e30427c73a: port 5(veth8a3e17d) entered blocking state [ 39.747400] br-87e30427c73a: port 5(veth8a3e17d) entered forwarding state [ 39.849509] br-87e30427c73a: port 6(veth9746aee) entered blocking state [ 39.849514] br-87e30427c73a: port 6(veth9746aee) entered disabled state [ 39.849603] device veth9746aee entered promiscuous mode [ 39.849720] br-87e30427c73a: port 6(veth9746aee) entered blocking state [ 39.849723] br-87e30427c73a: port 6(veth9746aee) entered forwarding state [ 39.969993] br-87e30427c73a: port 7(veth9092e54) entered blocking state [ 39.969998] br-87e30427c73a: port 7(veth9092e54) entered disabled state [ 39.971213] device veth9092e54 entered promiscuous mode [ 39.971417] br-87e30427c73a: port 7(veth9092e54) entered blocking state [ 39.971421] br-87e30427c73a: port 7(veth9092e54) entered forwarding state [ 40.081255] br-87e30427c73a: port 8(veth2934f31) entered blocking state [ 40.081261] br-87e30427c73a: port 8(veth2934f31) entered disabled state [ 40.081455] device veth2934f31 entered promiscuous mode [ 40.081754] br-87e30427c73a: port 8(veth2934f31) entered blocking state [ 40.081758] br-87e30427c73a: port 8(veth2934f31) entered forwarding state [ 40.135693] br-87e30427c73a: port 9(veth7d0b48f) entered blocking state [ 40.135698] br-87e30427c73a: port 9(veth7d0b48f) entered disabled state [ 40.135898] device veth7d0b48f entered promiscuous mode [ 40.136129] br-87e30427c73a: port 9(veth7d0b48f) entered blocking state [ 40.136133] br-87e30427c73a: port 9(veth7d0b48f) entered forwarding state [ 40.248453] br-9d1af4418840: port 3(veth85bb007) entered disabled state [ 40.248575] br-87e30427c73a: port 3(vethd8a0367) entered disabled state [ 40.248687] br-87e30427c73a: port 4(veth7a1290c) entered disabled state [ 40.248835] br-9d1af4418840: port 4(veth533f220) entered disabled state [ 40.248942] br-87e30427c73a: port 5(veth8a3e17d) entered disabled state [ 40.249136] br-87e30427c73a: port 6(veth9746aee) entered disabled state [ 40.249237] br-87e30427c73a: port 7(veth9092e54) entered disabled state [ 40.249417] br-87e30427c73a: port 8(veth2934f31) entered disabled state [ 40.249535] br-87e30427c73a: port 9(veth7d0b48f) entered disabled state [ 40.570988] eth0: renamed from vethaf205ba [ 40.650441] IPv6: ADDRCONF(NETDEV_CHANGE): veth5205fcd: link becomes ready [ 40.650542] br-87e30427c73a: port 2(veth5205fcd) entered blocking state [ 40.650548] br-87e30427c73a: port 2(veth5205fcd) entered forwarding state [ 40.765617] eth0: renamed from vethbb912e3 [ 40.933603] eth0: renamed from veth56c51be [ 40.965438] eth0: renamed from veth637d11e [ 41.005335] eth0: renamed from vethcc1f6c5 [ 41.053484] eth0: renamed from vethd664b88 [ 41.098223] IPv6: ADDRCONF(NETDEV_CHANGE): veth49aca89: link becomes ready [ 41.098315] br-9d1af4418840: port 2(veth49aca89) entered blocking state [ 41.098319] br-9d1af4418840: port 2(veth49aca89) entered forwarding state [ 41.098393] IPv6: ADDRCONF(NETDEV_CHANGE): vethaf6446c: link becomes ready [ 41.098441] br-ef5229a54bf7: port 1(vethaf6446c) entered blocking state [ 41.098445] br-ef5229a54bf7: port 1(vethaf6446c) entered forwarding state [ 41.098504] IPv6: ADDRCONF(NETDEV_CHANGE): br-ef5229a54bf7: link becomes ready [ 41.114088] IPv6: ADDRCONF(NETDEV_CHANGE): veth1c5eb93: link becomes ready [ 41.114195] br-a3b5a3ee7163: port 1(veth1c5eb93) entered blocking state [ 41.114198] br-a3b5a3ee7163: port 1(veth1c5eb93) entered forwarding state [ 41.114281] IPv6: ADDRCONF(NETDEV_CHANGE): veth0acfe40: link becomes ready [ 41.114330] br-9d1af4418840: port 1(veth0acfe40) entered blocking state [ 41.114335] br-9d1af4418840: port 1(veth0acfe40) entered forwarding state [ 41.114393] IPv6: ADDRCONF(NETDEV_CHANGE): veth239fad8: link becomes ready [ 41.114439] br-87e30427c73a: port 1(veth239fad8) entered blocking state [ 41.114444] br-87e30427c73a: port 1(veth239fad8) entered forwarding state [ 41.114490] IPv6: ADDRCONF(NETDEV_CHANGE): br-a3b5a3ee7163: link becomes ready [ 41.402120] eth0: renamed from veth15424a3 [ 41.453808] IPv6: ADDRCONF(NETDEV_CHANGE): veth533f220: link becomes ready [ 41.453903] br-9d1af4418840: port 4(veth533f220) entered blocking state [ 41.453906] br-9d1af4418840: port 4(veth533f220) entered forwarding state [ 41.549167] eth0: renamed from veth2a3a14a [ 41.625905] IPv6: ADDRCONF(NETDEV_CHANGE): veth7a1290c: link becomes ready [ 41.626031] br-87e30427c73a: port 4(veth7a1290c) entered blocking state [ 41.626035] br-87e30427c73a: port 4(veth7a1290c) entered forwarding state [ 41.661678] eth0: renamed from veth24eb470 [ 41.743927] eth0: renamed from veth35119c1 [ 41.777076] eth0: renamed from veth0cb72ad [ 41.805416] IPv6: ADDRCONF(NETDEV_CHANGE): veth9092e54: link becomes ready [ 41.805553] br-87e30427c73a: port 7(veth9092e54) entered blocking state [ 41.805558] br-87e30427c73a: port 7(veth9092e54) entered forwarding state [ 41.805656] IPv6: ADDRCONF(NETDEV_CHANGE): veth8a3e17d: link becomes ready [ 41.805733] br-87e30427c73a: port 5(veth8a3e17d) entered blocking state [ 41.805737] br-87e30427c73a: port 5(veth8a3e17d) entered forwarding state [ 41.806132] IPv6: ADDRCONF(NETDEV_CHANGE): veth9746aee: link becomes ready [ 41.806227] br-87e30427c73a: port 6(veth9746aee) entered blocking state [ 41.806233] br-87e30427c73a: port 6(veth9746aee) entered forwarding state [ 41.845877] eth0: renamed from veth7fc9585 [ 41.930088] eth0: renamed from vethcd2312e [ 41.974554] IPv6: ADDRCONF(NETDEV_CHANGE): vethd8a0367: link becomes ready [ 41.974694] br-87e30427c73a: port 3(vethd8a0367) entered blocking state [ 41.974704] br-87e30427c73a: port 3(vethd8a0367) entered forwarding state [ 42.086999] eth0: renamed from veth428d018 [ 42.136173] IPv6: ADDRCONF(NETDEV_CHANGE): veth85bb007: link becomes ready [ 42.136315] br-9d1af4418840: port 3(veth85bb007) entered blocking state [ 42.136322] br-9d1af4418840: port 3(veth85bb007) entered forwarding state [ 42.136418] IPv6: ADDRCONF(NETDEV_CHANGE): veth2934f31: link becomes ready [ 42.136498] br-87e30427c73a: port 8(veth2934f31) entered blocking state [ 42.136501] br-87e30427c73a: port 8(veth2934f31) entered forwarding state [ 42.136578] eth0: renamed from veth88bd28f [ 42.161902] IPv6: ADDRCONF(NETDEV_CHANGE): veth7d0b48f: link becomes ready [ 42.162040] br-87e30427c73a: port 9(veth7d0b48f) entered blocking state [ 42.162045] br-87e30427c73a: port 9(veth7d0b48f) entered forwarding state [ 43.889952] rfkill: input handler enabled [ 45.621945] tun: Universal TUN/TAP device driver, 1.6 [ 45.763611] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 45.763615] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved. [ 50.146789] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 50.449810] rfkill: input handler disabled
