Tried with radeon-force-some-clocks.diff, twice. One of the times I got much further (I could actualy play the game, rather than only reach the menus), but it also crashed after a very short time (1/2 minutes). The second time it just crashed in the menus as usual.
The X server log is also different. No loop this time. I grabbed a copy of Xorg.log before running the game (xmoto), so that I could diff it against the complete log after rebooting the system. The following lines were printed after xmoto started: +(**) RADEON(0): RADEONDisplayPowerManagementSet(0,0x0) +(**) RADEON(0): EngineRestore (32/32) +(**) RADEON(0): RADEONSwitchMode() !n(**) RADEON(0): RADEONModeInit() +800x600 56.30 800 832 896 1048 600 601 604 631 (24,32) +H +V +800x600 56.30 800 832 896 1048 600 601 604 631 (24,32) +H +V +(**) RADEON(0): Pitch = 8388736 bytes (virtualX = 1024, displayWidth = 1024) +(**) RADEON(0): dc=5630, of=22520, fd=100, pd=4 +(**) RADEON(0): RADEONInit returns 0x6fe0b0 +(**) RADEON(0): RADEONRestoreMode() +(**) RADEON(0): RADEONRestoreMode(0x6fe0b0) +(**) RADEON(0): RADEONRestoreMemMapRegisters() : +(**) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 +(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0 +(**) RADEON(0): Updating display base addresses... +(**) RADEON(0): Memory map updated. +(**) RADEON(0): Programming CRTC1, offset: 0x00000000 +(**) RADEON(0): Wrote: 0x0000000c 0x00020064 0x00000000 (0x0000a700) +(**) RADEON(0): Wrote: rd=12, fd=100, pd=2 +(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20157c7c +(**) RADEON(0): EngineRestore (32/32) This time I also saved stdout/stderr output from xmoto itself: Unknown device ID 5B60, please report. Assuming plain R300. libGL warning: 3D driver claims to not support visual 0x23 libGL warning: 3D driver claims to not support visual 0x24 libGL warning: 3D driver claims to not support visual 0x25 libGL warning: 3D driver claims to not support visual 0x26 libGL warning: 3D driver claims to not support visual 0x27 libGL warning: 3D driver claims to not support visual 0x28 libGL warning: 3D driver claims to not support visual 0x29 libGL warning: 3D driver claims to not support visual 0x2a libGL warning: 3D driver claims to not support visual 0x2b libGL warning: 3D driver claims to not support visual 0x2c libGL warning: 3D driver claims to not support visual 0x2d libGL warning: 3D driver claims to not support visual 0x2e libGL warning: 3D driver claims to not support visual 0x2f libGL warning: 3D driver claims to not support visual 0x30 libGL warning: 3D driver claims to not support visual 0x31 libGL warning: 3D driver claims to not support visual 0x32 *********************************WARN_ONCE********************************* File r300_state.c function r300Enable line 456 TODO - double side stencil ! *************************************************************************** No ctx->FragmentProgram._Current!! radeonWaitIrq: drmRadeonIrqWait: -16 Sidenote: My card is a Radeon X300 SE. Where should I report that ID 5b60 for addition ? I couldn't find this string in the ati driver. -- Robert Millan My spam trap is <[EMAIL PROTECTED]>. Note: this address is only intended for spam harvesters. Writing to it will get you added to my black list. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]