Package: cdrecord Version: 4:2.01+01a03-5 Severity: normal
Hi, I have an IDE DVD writer connected to a USB to IDE adaptor. I get errors trying to burn DVDs or CDRWs, but I did succeeded erasing a CDRW. Here is the output I get: /usr/bin/cdrecord: Warning: Running on Linux-2.6.17-1-686 /usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer. /usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. scsidev: '7,0,0' scsibus: 7 target: 0 lun: 0 Linux sg driver version: 3.5.33 /usr/bin/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). SCSI buffer size: 64512 /usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. /usr/bin/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support. Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <[EMAIL PROTECTED]>. The original author should not be bothered with problems of this version. TOC Type: 0 = CD-DA Using libscg version 'debian-0.8debian2'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-H10A ' Revision : 'JL02' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x000A Profile: 0x0012 Profile: 0x0011 Profile: 0x0015 Profile: 0x0016 Profile: 0x0014 Profile: 0x0013 Profile: 0x001A Profile: 0x001B Profile: 0x002B Profile: 0x0010 Profile: 0x0009 Profile: 0x000A (current) Profile: 0x0008 Profile: 0x0002 /usr/bin/cdrecord: Cannot allocate memory. read buffer: scsi sendcmd: no error CDB: 3C 00 00 00 00 00 00 FC 00 00 status: 0x0 (GOOD STATUS) cmd finished after 0.000s timeout 200s Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB FIFO size : 4194304 = 4096 KB pregap1: -1 Track 01: audio 301 MB (29:50.90) no preemp swab copy Track 02: audio 273 MB (27:07.61) no preemp swab copy Total size: 575 MB (56:58.52) = 256389 sectors Lout start: 575 MB (57:00/39) = 256389 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 3 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11240 (97:32/10) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 5 A1 values: 24 1A D8 A2 values: 26 B2 4A Disk type: Phase change Manuf. index: 27 Manufacturer: Prodisc Technology Inc. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103460 Starting to write CD/DVD at speed 10 in real SAO mode for single session. Last chance to quit, starting real write in 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 /usr/bin/cdrecord: Cannot allocate memory. write_g1: scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1B 00 status: 0x0 (GOOD STATUS) cmd finished after 0.000s timeout 200s Writing pregap for track 1 at -150 write track pad data: error after 0 bytes BFree: 1029 K BSize: 1029 K Starting new track at sector: 0 Track 01: 0 of 301 MB written. /usr/bin/cdrecord: Cannot allocate memory. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x0 (GOOD STATUS) cmd finished after 0.000s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 0 bytes Writing time: 5.064s Average write speed 682.5x. Fixating... Fixating time: 0.004s /usr/bin/cdrecord: fifo had 64 puts and 1 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/cdrecord.mmap -v gracetime=2 dev=7,0,0 speed=10 -dao driveropts=burnfree -overburn -useinfo -audio -shorttrack /home/haggai/CDs/k3b_audio_0_01.inf /home/haggai/CDs/k3b_audio_0_02.inf Thanks, Haggai Eran -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (550, 'testing'), (99, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-686 Locale: LANG=he_IL.UTF-8, LC_CTYPE=he_IL.UTF-8 (charmap=UTF-8) Versions of packages cdrecord depends on: ii debconf [debconf-2.0] 1.5.2 Debian configuration management sy ii libc6 2.3.6-15 GNU C Library: Shared libraries ii libcap1 1:1.10-14 support for getting/setting POSIX. ii makedev 2.3.1-81 creates device files in /dev Versions of packages cdrecord recommends: ii mkisofs 4:2.01+01a03-5 Creates ISO-9660 CD-ROM filesystem -- debconf information: cdrecord/MAKEDEVNEW: true cdrecord/do_it_yourself: * cdrecord/SUID_bit: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]