Package: grub Version: 0.97-13 Severity: grave Justification: renders package unusable
in short: whenever I run update-grub, it changes the device entries for kernel and initrd location in menu.lst from (hd0,0) to (hd2,0) rendering the system unbootable (without additional work). in more detail: my setup is a bit unusual. I have two optical drives on the primary IDE bus and one harddisc on the secondary bus, used for backup. The system boots from an SATA drive in native mode for which I need to put the (hd0,0) entries in menu.lst to be recognized as boot device. If I use grub from floppy, it finds the kernel and initrd on my root filesystem using the (hd0,0) device/partition identifier. However, update-grub seems to think that it is smarter and changes the entries to (hd2,0) - oohps. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (997, 'testing'), (500, 'unstable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-amd64-k8 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- no debconf information -- lspci/dmesg if they help any: 00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 00:0c.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) 00:0c.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04) 00:0c.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) 00:0e.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN (rev 01) 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2) Bootdata ok (command line is root=/dev/sda1 ro ) Linux version 2.6.17-1-amd64-k8 (Debian 2.6.17-4) ([EMAIL PROTECTED]) (gcc version 4.1.2 20060715 (prerelease) (Debian 4.1.1-9)) #1 Mon Jul 17 11:59:49 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa7c0 ACPI: XSDT (v001 A M I OEMXSDT 0x06000530 MSFT 0x00000097) @ 0x000000007ffb0100 ACPI: FADT (v003 A M I OEMFACP 0x06000530 MSFT 0x00000097) @ 0x000000007ffb0290 ACPI: MADT (v001 A M I OEMAPIC 0x06000530 MSFT 0x00000097) @ 0x000000007ffb0390 ACPI: OEMB (v001 A M I OEMBIOS 0x06000530 MSFT 0x00000097) @ 0x000000007ffc0040 ACPI: DSDT (v001 A0036 A0036001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000 On node 0 totalpages: 515916 DMA zone: 2914 pages, LIFO batch:0 DMA32 zone: 513002 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7f780000) Checking aperture... CPU 0: aperture @ d0000000 size 256 MB Built 1 zonelists Kernel command line: root=/dev/sda1 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2202.864 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2055276k/2096832k available (1722k kernel code, 40884k reserved, 783k data, 156k init) Calibrating delay using timer specific routine.. 4410.63 BogoMIPS (lpj=8821273) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 00 Using local APIC timer interrupts. result 12516274 Detected 12.516 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs... it is Freeing initrd memory: 4940k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Quirk-MSI-K8T Soundcard On PCI: Unexpected Value in PCI-Register: no Change! PCI: enabled onboard AC97/MC97 devices Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0700 pnp: ACPI device : hid PNP0400 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 14 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc [EMAIL PROTECTED]) agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 256M @ 0xd0000000 PCI-DMA: Disabling IOMMU. pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:08' and the driver 'system' pnp: 00:08: ioport range 0x680-0x6ff has been reserved pnp: 00:08: ioport range 0x290-0x297 has been reserved pnp: match found with the PnP device '00:09' and the driver 'system' pnp: match found with the PnP device '00:0a' and the driver 'system' pnp: match found with the PnP device '00:0d' and the driver 'system' PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f9f00000-fbffffff PREFETCH window: e0000000-f8ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1156224899.648:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered 0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:0b' and the driver 'serial' 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: match found with the PnP device '00:0c' and the driver 'serial' 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A isa bounce pool size: 16 pages RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize usbmon: debugfs is not available pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:03' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI wakeup devices: PCI0 PS2K UAR2 UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 156k freed input: AT Translated Set 2 keyboard as /class/input/input0 GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 169 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 169, io mem 0xf9e00000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ieee1394: Initialized config rom entry `ip1394' 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 9 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 169, io base 0x0000d800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected SCSI subsystem initialized libata version 1.20 loaded. ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 9 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 169, io base 0x0000e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 9 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 169, io base 0x0000e400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 9 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 169, io base 0x0000e800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 177 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177] MMIO=[f9600000-f96007ff] Max Packet=[2048] IR/IT contexts=[4/8] GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:0c.2[B] -> GSI 18 (level, low) -> IRQ 185 ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[f9b00000-f9b007ff] Max Packet=[2048] IR/IT contexts=[4/8] usb 1-2: new high speed USB device using ehci_hcd and address 3 GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 193 skge 1.5 addr 0xf9900000 irq 193 chip Yukon-Lite rev 9 skge eth0: addr 00:13:d4:7a:ca:bb VP_IDE: IDE controller at PCI slot 0000:00:0f.1 GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 201 PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usb 1-3: new high speed USB device using ehci_hcd and address 4 usb 1-3: configuration #1 chosen from 1 choice hda: YAMAHA CRW2200E, ATAPI CD/DVD-ROM drive usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800004fda40] ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c01511374e4] hdb: PLEXTOR DVDR PX-740A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice hdc: WDC WD1200AB-00CBA1, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 8139cp: pci dev 0000:00:09.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 177 eth0: RealTek RTL8139 at 0xffffc2000013e000, 00:e0:7d:b5:87:b2, IRQ 177 eth0: Identified 8139 chip type 'RTL-8139C' sata_via 0000:00:0f.0: version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 201 sata_via 0000:00:0f.0: routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC000 irq 201 ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xC008 irq 201 hda: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) hdc: max request size: 128KiB hdc: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdc: cache flushes not supported hdc: hdc1 usb 1-2.4: new high speed USB device using ehci_hcd and address 6 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:407f ata1: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_via usb 1-2.4: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1 input: Logitech USB Receiver as /class/input/input2 input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.0-1 input: Logitech USB RECEIVER as /class/input/input3 input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:10.1-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ata2: SATA link down (SStatus 0) scsi1 : sata_via Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: Attached scsi disk sda Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. idVendor = 0xb05, idProduct = 0x1706 usbcore: registered new driver rt2570 pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:07' and the driver 'parport_pc' parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP] CSLIP: code copyright 1989 Regents of the University of California nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177 NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8762 Mon May 15 13:58:14 PDT 2006 gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0xb000, speed 1186kHz ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded PCI: Enabling device 0000:00:11.6 (0000 -> 0001) GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 209 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0 hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1 PCI: Setting latency timer of device 0000:00:11.6 to 64 ACPI: PCI interrupt for device 0000:00:11.6 disabled VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 PCI: Enabling device 0000:00:11.5 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:11.5 to 64 ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 193 Installing spdif_bug patch: Audigy 2 ZS [SB0350] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0) HiSax: DSS1 Rev. 2.32.2.3 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added GSI 22 sharing vector 0xD9 and IRQ 22 ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 217 hisax_fcpcipnp: found adapter Fritz!Card PCI v2 at 0000:00:0e.0 Adding 2939852k swap on /dev/sda5. Priority:-1 extents:1 across:2939852k EXT3 FS on sda1, internal journal ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6 (1400 mV) powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8 (1350 mV) powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa (1300 mV) powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0xe, vid 0x6 loop: loaded (max 8 devices) Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds [... more stuff mostly concerning network/firewall, agp, and vmware] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]