Package: installation-reports Boot method: netboot, usb drive Image version: daily installer build from October 5th, 2006 Date: October 5th, 2006
Machine: Dell OptiPlex 745 Processor: Pentium D 3.? GHz Memory: 1G Partitions: None Output of lspci and lspci -n: 00:00.0 Host bridge: Intel Corporation Q963/Q965 Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation Q963/Q965 PCI Express Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Q963/Q965 Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation Q963/Q965 Integrated Graphics Controller (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02) 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02) 00:00.0 0600: 8086:2990 (rev 02) 00:01.0 0604: 8086:2991 (rev 02) 00:02.0 0300: 8086:2992 (rev 02) 00:02.1 0380: 8086:2993 (rev 02) 00:1a.0 0c03: 8086:2834 (rev 02) 00:1a.1 0c03: 8086:2835 (rev 02) 00:1a.7 0c03: 8086:283a (rev 02) 00:1b.0 0403: 8086:284b (rev 02) 00:1c.0 0604: 8086:283f (rev 02) 00:1c.4 0604: 8086:2847 (rev 02) 00:1d.0 0c03: 8086:2830 (rev 02) 00:1d.1 0c03: 8086:2831 (rev 02) 00:1d.2 0c03: 8086:2832 (rev 02) 00:1d.7 0c03: 8086:2836 (rev 02) 00:1e.0 0604: 8086:244e (rev f2) 00:1f.0 0601: 8086:2810 (rev 02) 00:1f.2 0101: 8086:2820 (rev 02) 00:1f.3 0c05: 8086:283e (rev 02) 00:1f.5 0101: 8086:2825 (rev 02) 03:00.0 0200: 14e4:167a (rev 02) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [E] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [E] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: The net-install cd failed, because it couldn't find the CD-Rom drive. The usb disk install booted, and found the daily iso on the drive, but neither could detect any disk drives (except the USB drive). I used today's d-i build for both installs, with no success. I believe that the ICH8 controller needs 2.6.18 to work. Any idea when d-i will be available with 2.6.18? Thanks, Jason Martens -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]