Hi Drew, > Only two suggestions at this point. First, we've now finished the > X11R7.1 transition in unstable. Could you confirm if the problem still > remains after the upgrade?
Yes. I upgrade today my debian sid and the problem still remains ... > Second, have you tried using xserver-xorg-input-hyperpen instead? It's > only supposed to support Hyperpen 3000 - 6000, but it would be useful > to confirm or refute if it also supports the 1200 model. I've tried the 'hyperpen' driver (xserver-xorg-input-hyperpen package). The behavior of the tablet is comparable with a mouse. The stylet cannot reach all the screen. I did not find any documentation to configure the tablet (xorg options). And it is not recognized with "The GIMP". This is what i get in Xorg.0.log : ... (II) LoadModule: "hyperpen" (II) Loading /usr/lib/xorg/modules/input/hyperpen_drv.so (II) Module hyperpen: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 ... (**) stylusC: always reports core events (**) stylusC serial device is /dev/input/event5 (**) Option "DebugLevel" "100" (**) stylusC: debug level set to 100 (**) stylusC is in absolute mode (**) stylusC is in cursor-mode cursor (EE) stylusC: invalid PMin value (should be > 2).Using default. (EE) stylusC: invalid PMax value (should be > 3).Using default. ... (II) XINPUT: Adding extended input device "stylusC" (type: HyperPen Tablet) ... xf86HypProc pHyp=0x8216030 what=INIT xf86HypControlProc opening /dev/input/event5 (**) Option "Device" "/dev/input/event5" /dev/input/event5 opened as fd 10 initializing HyperPen tablet reading model Timeout while reading HyperPen tablet. No tablet connected ??? END xf86HypProc Success what=0 dev=0x8216030 priv=0x82149a8 xkb_keycodes { include "xfree86+aliases(azerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete" }; xkb_symbols { include "pc(pc105)+fr(latin9)" }; xkb_geometry { include "pc(pc105)" }; xf86HypProc pHyp=0x8216030 what=ON opening /dev/input/event5 /dev/input/event5 opened as fd 10 initializing HyperPen tablet reading model Timeout while reading HyperPen tablet. No tablet connected ??? (II) Configured Mouse: ps2EnableDataReporting: succeeded The 7 last lines repeat many times. Thank you. Guy PS: 'lsusb -v' Bus 002 Device 002: ID 08ca:0010 Aiptek International, Inc. Tablet Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x08ca Aiptek International, Inc. idProduct 0x0010 Tablet bcdDevice 1.05 iManufacturer 1 AIPTEK International Inc. iProduct 3 USB Tablet Series Version 1.05 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 26mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Devices bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 30 Taiwan bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 462 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]