Package: linux-image-2.6.18-3-486 Version: 2.6.18-6 Severity: normal When trying to install an additional Harddisk, I noted that fdisk reported a wrong size for it. Some investigation revealed that /proc/ide/hdc/geometry reported physical 16383/16/63 # this is ok logical 58140/16/63 # this is wrong
fdisk reported Disk /dev/hdc: 30.0 GB, 30005821440 bytes 255 heads, 63 sectors/track, 3648 cylinders sfdisk -g /dev/hdc: 58140 cylinders, 16 heads, 63 sectors/track sfdisk -G Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. /dev/hdc: 3648 cylinders, 255 heads, 63 sectors/track I have seen this behavior on linux-image-2.6.17-2-{4,5}86, too. It is present on at least three different computers An excerpt from dmesg on an Inspirion 1150: ... ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: SAMSUNG CDRW/DVD SN-324S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: FUJITSU MHT2030AT, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 128KiB hdc: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63, UDMA(100) hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 < hdc5 > ... Further information is available upon request. -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (650, 'testing'), (600, 'unstable'), (500, 'testing-proposed-updates') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-486 Locale: LANG=de_CH.UTF-8, LC_CTYPE=de_CH.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.18-3-486 depends on: ii coreutils 5.97-5 The GNU core utilities ii debconf [debconf-2.0] 1.5.8 Debian configuration management sy ii module-init-tools 3.3-pre3-1 tools for managing Linux kernel mo ii yaird [linux-initramfs-tool] 0.0.12-18 Yet Another mkInitRD linux-image-2.6.18-3-486 recommends no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]