Package: cdrdao
Severity: normal
Hi,
I am not able to create a CD using the following cue file:
FILE "zetaboot.img" BINARY
TRACK 01 MODE1/2048
INDEX 01 00:00:00
POSTGAP 00:02:00
FILE "zetacd.img" BINARY
TRACK 02 MODE1/2048
INDEX 01 00:00:00
POSTGAP 00:02:00
cdrdao reports:
$ sudo cdrdao write --driver generic-mmc --overburn --eject --device
ATA:0,0,0 --speed 16 zeta.cue
Cdrdao version 1.2.1 - (C) Andreas Mueller <[EMAIL PROTECTED]>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current
driver tables.
Using libscg version 'schily-0.8'
ATA:0,0,0: PHILIPS DVD+-RW DVD8631 Rev: 9D03
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
Starting write at speed 16...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Turning BURN-Proof on
Executing power calibration...
Power calibration successful.
ERROR: Drive does not accept any cue sheet variant - please report.
ERROR: Writing failed.
-----------------------------------------------------------
On a related note, if I first try a simulate:
$ sudo cdrdao simulate --device ATA:0,0,0 --speed 48 zeta.cue
I get:
Cdrdao version 1.2.1 - (C) Andreas Mueller <[EMAIL PROTECTED]>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current
driver tables.
Using libscg version 'schily-0.8'
ATA:0,0,0: PHILIPS DVD+-RW DVD8631 Rev: 9D03
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
Disk seems to be written - hit return to reload disk.
Reloading disk...
WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
ERROR: Cannot setup device ATA:0,0,0.
cdrdao seems to eject and the mount the disk back correctly, but feil to load
the disk.
It would be super nice if the reload option was working.
Thanks !
Mathieu
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (989, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686-smp
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
