Package: installation-reports (bug report : installgui fails)
Boot method: CD Image version: Debian GNU/Linux testing "Etch" - Official Snapshot i386 NETINST Binary-1 20070103-21:52 (/.disk/info) Date: Jan 5 22:59:22 (IST) Machine: Assembled PC x86. Processor: Intel Pentium III (Katmai) 550MHz Memory: 128 MB Partitions: (output of fdisk -l) Disk /dev/hda: 80.0 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 2 16033+ 11 Hidden FAT12 /dev/hda2 3 975 7815622+ 83 Linux /dev/hda3 976 1583 4883760 c W95 FAT32 (LBA) /dev/hda4 1584 9733 65464875 5 Extended /dev/hda5 1584 2556 7815591 83 Linux /dev/hda6 2557 2618 497983+ 82 Linux swap / Solaris /dev/hda7 2619 6265 29294496 83 Linux /dev/hda8 6266 6873 4883728+ 83 Linux /dev/hda9 6874 7481 4883728+ 83 Linux /dev/hda10 9126 9733 4883728+ 83 Linux Output of lspci -nn : 0000:00:00.0 0600: 8086:7120 (rev 03) 0000:00:01.0 0300: 8086:7121 (rev 03) 0000:00:1e.0 0604: 8086:2418 (rev 02) 0000:00:1f.0 0601: 8086:2410 (rev 02) 0000:00:1f.1 0101: 8086:2411 (rev 02) 0000:00:1f.2 0c03: 8086:2412 (rev 02) 0000:00:1f.5 0401: 8086:2415 (rev 02) 0000:01:0a.0 0200: 10ec:8139 (rev 10) Output of lspci -vnn: 0000:00:00.0 0600: 8086:7120 (rev 03) Subsystem: 8086:7120 Flags: bus master, fast devsel, latency 0 0000:00:01.0 0300: 8086:7121 (rev 03) Subsystem: 8086:7121 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 10 Memory at d8000000 (32-bit, prefetchable) [size=64M] Memory at de000000 (32-bit, non-prefetchable) [size=512K] Capabilities: [dc] Power Management version 1 0000:00:1e.0 0604: 8086:2418 (rev 02) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: dc000000-ddffffff Prefetchable memory behind bridge: 10000000-100fffff 0000:00:1f.0 0601: 8086:2410 (rev 02) Flags: bus master, medium devsel, latency 0 0000:00:1f.1 0101: 8086:2411 (rev 02) (prog-if 80 [Master]) Subsystem: 8086:2411 Flags: bus master, medium devsel, latency 0 I/O ports at f000 [size=16] 0000:00:1f.2 0c03: 8086:2412 (rev 02) Subsystem: 8086:2412 Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at d000 [size=32] 0000:00:1f.5 0401: 8086:2415 (rev 02) Subsystem: 11d4:0048 Flags: bus master, medium devsel, latency 0, IRQ 5 I/O ports at d800 [size=256] I/O ports at dc00 [size=64] 0000:01:0a.0 0200: 10ec:8139 (rev 10) Subsystem: 10ec:8139 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at c000 [size=256] Memory at dd000000 (32-bit, non-prefetchable) [size=256] Expansion ROM at 10000000 [disabled] [size=64K] Capabilities: [50] Power Management version 2 bootparameters : installgui Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [ ] This was O.K when a normal textmode install is used. Configure network: [ ] Detect CD: [O] Load installer modules: [E] DirectFB initialisation fails. then init keeps restarting debian-installer for ever. Detect hard drives: [O] Partition hard drives: [ ] Install base system: [ ] Clock/timezone setup: [ ] User/password setup: [ ] Install tasks: [ ] Install boot loader: [ ] Overall install: [ ] Comments/Problems: I am using the daily-build netinst image burnt onto a CDRW using cdrecord. Once the bootsplash is shown, I used installgui at boot-prompt. Booting is perfect in all respects until the framebuffer initialisation happens. A page full of DirectFB initialisation stuff is shown, then screen blanks and repeats the same thing. I used suspend (CTRL+S) to hold the screen. From vc4 it was clear that debian-installer was the one which was being repeatedly invoked. So I used vc2 shell to do 'log-output debian-installer' to get pretty much the same output as on vc1. And here is the final /var/log/syslog ---------------------------------syslog start----------------------------------------- Jan 5 22:59:22 syslogd started: BusyBox v1.1.3 Jan 5 22:59:22 kernel: klogd started: BusyBox v1.1.3 (Debian 1:1.1.3-3) Jan 5 22:59:22 kernel: Linux version 2.6.17-2-486 (Debian 2.6.17-9) ([EMAIL PROTECTED]) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 Wed Sep 13 15:56:30 UTC 2006 Jan 5 22:59:22 kernel: BIOS-provided physical RAM map: Jan 5 22:59:22 kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Jan 5 22:59:22 kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Jan 5 22:59:22 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jan 5 22:59:22 kernel: BIOS-e820: 0000000000100000 - 0000000007ef0000 (usable) Jan 5 22:59:22 kernel: BIOS-e820: 0000000007ef0000 - 0000000007ef3000 (ACPI NVS) Jan 5 22:59:22 kernel: BIOS-e820: 0000000007ef3000 - 0000000007f00000 (ACPI data) Jan 5 22:59:22 kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Jan 5 22:59:22 kernel: 126MB LOWMEM available. Jan 5 22:59:22 kernel: On node 0 totalpages: 32496 Jan 5 22:59:22 kernel: DMA zone: 4096 pages, LIFO batch:0 Jan 5 22:59:22 kernel: Normal zone: 28400 pages, LIFO batch:7 Jan 5 22:59:22 kernel: DMI 2.2 present. Jan 5 22:59:22 kernel: ACPI: RSDP (v000 IntelR ) @ 0x000f6c70 Jan 5 22:59:22 kernel: ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x07ef3000 Jan 5 22:59:22 kernel: ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x07ef3040 Jan 5 22:59:22 kernel: ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 Jan 5 22:59:22 kernel: ACPI: PM-Timer IO Port: 0x4008 Jan 5 22:59:22 kernel: Allocating PCI resources starting at 10000000 (gap: 07f00000:f7c00000) Jan 5 22:59:22 kernel: Built 1 zonelists Jan 5 22:59:22 kernel: Kernel command line: video=vesa:ywrap,mtrr vga=788 initrd=/install.386/gtk/initrd.gz -- BOOT_IMAGE=/install.386/vmlinuz Jan 5 22:59:22 kernel: Local APIC disabled by BIOS -- you can enable it with "lapic" Jan 5 22:59:22 kernel: mapped APIC to ffffd000 (01101000) Jan 5 22:59:22 kernel: Enabling fast FPU save and restore... done. Jan 5 22:59:22 kernel: Enabling unmasked SIMD FPU exception support... done. Jan 5 22:59:22 kernel: Initializing CPU#0 Jan 5 22:59:22 kernel: PID hash table entries: 512 (order: 9, 2048 bytes) Jan 5 22:59:22 kernel: Detected 551.321 MHz processor. Jan 5 22:59:22 kernel: Using pmtmr for high-res timesource Jan 5 22:59:22 kernel: Console: colour VGA+ 80x25 Jan 5 22:59:22 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Jan 5 22:59:22 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Jan 5 22:59:22 kernel: Memory: 116064k/129984k available (1456k kernel code, 13376k reserved, 566k data, 252k init, 0k highmem) Jan 5 22:59:22 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Jan 5 22:59:22 kernel: Calibrating delay using timer specific routine.. 1103.75 BogoMIPS (lpj=2207504) Jan 5 22:59:22 kernel: Security Framework v1.0.0 initialized Jan 5 22:59:22 kernel: SELinux: Disabled at boot. Jan 5 22:59:22 kernel: Capability LSM initialized Jan 5 22:59:22 kernel: Mount-cache hash table entries: 512 Jan 5 22:59:22 kernel: CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 Jan 5 22:59:22 kernel: CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 Jan 5 22:59:22 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K Jan 5 22:59:22 kernel: CPU: L2 cache: 512K Jan 5 22:59:22 kernel: CPU serial number disabled. Jan 5 22:59:22 kernel: CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Jan 5 22:59:22 kernel: CPU: Intel Pentium III (Katmai) stepping 03 Jan 5 22:59:22 kernel: Checking 'hlt' instruction... OK. Jan 5 22:59:22 kernel: SMP alternatives: switching to UP code Jan 5 22:59:22 kernel: Freeing SMP alternatives: 0k freed Jan 5 22:59:22 kernel: ACPI: setting ELCR to 0200 (from 0e20) Jan 5 22:59:22 kernel: checking if image is initramfs... it is Jan 5 22:59:22 kernel: Freeing initrd memory: 9719k freed Jan 5 22:59:22 kernel: NET: Registered protocol family 16 Jan 5 22:59:22 kernel: EISA bus registered Jan 5 22:59:22 kernel: ACPI: bus type pci registered Jan 5 22:59:22 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb160, last bus=1 Jan 5 22:59:22 kernel: Setting up standard PCI resources Jan 5 22:59:22 kernel: ACPI: Subsystem revision 20060127 Jan 5 22:59:22 kernel: ACPI: Interpreter enabled Jan 5 22:59:22 kernel: ACPI: Using PIC for interrupt routing Jan 5 22:59:22 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Jan 5 22:59:22 kernel: PCI: Probing PCI hardware (bus 00) Jan 5 22:59:22 kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Jan 5 22:59:22 kernel: Boot video device is 0000:00:01.0 Jan 5 22:59:22 kernel: PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO Jan 5 22:59:22 kernel: PCI quirk: region 4080-40bf claimed by ICH4 GPIO Jan 5 22:59:22 kernel: PCI: Transparent bridge - 0000:00:1e.0 Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 Jan 5 22:59:22 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Jan 5 22:59:22 kernel: pnp: PnP ACPI init Jan 5 22:59:22 kernel: pnp: PnP ACPI: found 15 devices Jan 5 22:59:22 kernel: PnPBIOS: Disabled by ACPI PNP Jan 5 22:59:22 kernel: PCI: Using ACPI for IRQ routing Jan 5 22:59:22 kernel: doesn't work, try "pci=routeirq". If it helps, post a report Jan 5 22:59:22 kernel: PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.0 Jan 5 22:59:22 kernel: PCI: Bridge: 0000:00:1e.0 Jan 5 22:59:22 kernel: IO window: c000-cfff Jan 5 22:59:22 kernel: MEM window: dc000000-ddffffff Jan 5 22:59:22 kernel: PREFETCH window: 10000000-100fffff Jan 5 22:59:22 kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Jan 5 22:59:22 kernel: NET: Registered protocol family 2 Jan 5 22:59:22 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes) Jan 5 22:59:22 kernel: TCP established hash table entries: 4096 (order: 2, 16384 bytes) Jan 5 22:59:22 kernel: TCP bind hash table entries: 2048 (order: 1, 8192 bytes) Jan 5 22:59:22 kernel: TCP: Hash tables configured (established 4096 bind 2048) Jan 5 22:59:22 kernel: TCP reno registered Jan 5 22:59:22 kernel: audit: initializing netlink socket (disabled) Jan 5 22:59:22 kernel: audit(1168037956.024:1): initialized Jan 5 22:59:22 kernel: VFS: Disk quotas dquot_6.5.1 Jan 5 22:59:22 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 5 22:59:22 kernel: Initializing Cryptographic API Jan 5 22:59:22 kernel: io scheduler noop registered Jan 5 22:59:22 kernel: io scheduler anticipatory registered (default) Jan 5 22:59:22 kernel: io scheduler deadline registered Jan 5 22:59:22 kernel: io scheduler cfq registered Jan 5 22:59:22 kernel: isapnp: Scanning for PnP cards... Jan 5 22:59:22 kernel: isapnp: No Plug & Play device found Jan 5 22:59:22 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Jan 5 22:59:22 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 5 22:59:22 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 5 22:59:22 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Jan 5 22:59:22 kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Jan 5 22:59:22 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Jan 5 22:59:22 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jan 5 22:59:22 kernel: EISA: Probing bus 0 at eisa.0 Jan 5 22:59:22 kernel: Cannot allocate resource for EISA slot 4 Jan 5 22:59:22 kernel: EISA: Detected 0 cards. Jan 5 22:59:22 kernel: TCP bic registered Jan 5 22:59:22 kernel: NET: Registered protocol family 1 Jan 5 22:59:22 kernel: NET: Registered protocol family 17 Jan 5 22:59:22 kernel: NET: Registered protocol family 8 Jan 5 22:59:22 kernel: NET: Registered protocol family 20 Jan 5 22:59:22 kernel: Using IPI Shortcut mode Jan 5 22:59:22 kernel: ACPI wakeup devices: Jan 5 22:59:22 kernel: SLPB PCI0 USB0 UAR1 UAR2 Jan 5 22:59:22 kernel: ACPI: (supports S0 S1 S4 S5) Jan 5 22:59:22 kernel: Freeing unused kernel memory: 252k freed Jan 5 22:59:22 kernel: input: AT Translated Set 2 keyboard as /class/input/input0 Jan 5 22:59:22 kernel: usbcore: registered new driver usbfs Jan 5 22:59:22 kernel: usbcore: registered new driver hub Jan 5 22:59:22 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jan 5 22:59:22 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 5 22:59:22 kernel: parport: PnPBIOS parport detected. Jan 5 22:59:22 kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] Jan 5 22:59:22 kernel: USB Universal Host Controller Interface driver v3.0 Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jan 5 22:59:22 kernel: PCI: setting IRQ 11 as level-triggered Jan 5 22:59:22 kernel: ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Jan 5 22:59:22 kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Jan 5 22:59:22 kernel: uhci_hcd 0000:00:1f.2: UHCI Host Controller Jan 5 22:59:22 kernel: uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 Jan 5 22:59:22 kernel: uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000 Jan 5 22:59:22 kernel: usb usb1: configuration #1 chosen from 1 choice Jan 5 22:59:22 kernel: hub 1-0:1.0: USB hub found Jan 5 22:59:22 kernel: hub 1-0:1.0: 2 ports detected Jan 5 22:59:22 kernel: ICH: IDE controller at PCI slot 0000:00:1f.1 Jan 5 22:59:22 kernel: ICH: chipset revision 2 Jan 5 22:59:22 kernel: ICH: not 100% native mode: will probe irqs later Jan 5 22:59:22 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio Jan 5 22:59:22 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Jan 5 22:59:22 kernel: Probing IDE interface ide0... Jan 5 22:59:22 kernel: input: ImPS/2 Logitech Wheel Mouse as /class/input/input1 Jan 5 22:59:22 kernel: hda: SAMSUNG SV0802N, ATA DISK drive Jan 5 22:59:22 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jan 5 22:59:22 kernel: Probing IDE interface ide1... Jan 5 22:59:22 kernel: hdc: TSSTcorp CDW/DVD SH-M522C, ATAPI CD/DVD-ROM drive Jan 5 22:59:22 kernel: hdd: SAMSUNG CD-R/RW DRIVE SW-252F, ATAPI CD/DVD-ROM drive Jan 5 22:59:22 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Jan 5 22:59:22 kernel: hda: max request size: 512KiB Jan 5 22:59:22 kernel: hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33) Jan 5 22:59:22 kernel: hda: cache flushes supported Jan 5 22:59:22 kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 > Jan 5 22:59:22 kernel: hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) Jan 5 22:59:22 kernel: Uniform CD-ROM driver Revision: 3.20 Jan 5 22:59:22 kernel: hdd: ATAPI 1X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Jan 5 22:59:22 kernel: ACPI: Fan [FAN] (on) Jan 5 22:59:22 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2]) Jan 5 22:59:22 kernel: ACPI: Processor [CPU0] (supports 2 throttling states) Jan 5 22:59:22 kernel: ACPI: Thermal Zone [THRM] (38 C) Jan 5 22:59:24 kernel: usbcore: registered new driver usbkbd Jan 5 22:59:24 kernel: drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver Jan 5 22:59:24 kernel: usbcore: registered new driver hiddev Jan 5 22:59:24 kernel: usbcore: registered new driver usbhid Jan 5 22:59:24 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver Jan 5 22:59:24 kernel: usbcore: registered new driver usbserial Jan 5 22:59:24 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic Jan 5 22:59:24 kernel: usbcore: registered new driver usbserial_generic Jan 5 22:59:24 kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core Jan 5 22:59:25 kernel: vga16fb: initializing Jan 5 22:59:25 kernel: vga16fb: mapped to 0xb00a0000 Jan 5 22:59:25 kernel: Console: switching to colour frame buffer device 80x30 Jan 5 22:59:25 kernel: fb0: VGA16 VGA frame buffer device Jan 5 22:59:25 init: Starting pid 2097, console /dev/vc/1: '/sbin/debian-installer' Jan 5 22:59:25 init: Starting pid 2105, console /dev/vc/4: '/usr/bin/tail' Jan 5 22:59:27 init: Process '/sbin/debian-installer' (pid 2097) exited. Scheduling it for restart. Jan 5 22:59:27 init: Starting pid 2173, console /dev/vc/1: '/sbin/debian-installer' Jan 5 22:59:28 init: Process '/sbin/debian-installer' (pid 2173) exited. Scheduling it for restart. Jan 5 22:59:28 init: Starting pid 2235, console /dev/vc/1: '/sbin/debian-installer' Jan 5 22:59:30 init: Process '/sbin/debian-installer' (pid 2235) exited. Scheduling it for restart. Jan 5 22:59:30 init: Starting pid 2297, console /dev/vc/1: '/sbin/debian-installer' Jan 5 22:59:32 init: Process '/sbin/debian-installer' (pid 2297) exited. Scheduling it for restart. Jan 5 22:59:32 init: Starting pid 2359, console /dev/vc/1: '/sbin/debian-installer' Jan 5 22:59:33 init: Process '/sbin/debian-installer' (pid 2359) exited. Scheduling it for restart. Jan 5 22:59:33 init: Starting pid 2421, console /dev/vc/1: '/sbin/debian-installer' Jan 5 22:59:35 init: Process '/sbin/debian-installer' (pid 2421) exited. Scheduling it for restart. Jan 5 22:59:35 init: Starting pid 2483, console /dev/vc/1: '/sbin/debian-installer' Jan 5 22:59:37 init: Process '/sbin/debian-installer' (pid 2483) exited. Scheduling it for restart. Jan 5 22:59:37 init: Starting pid 2545, console /dev/vc/1: '/sbin/debian-installer' Jan 5 22:59:38 init: Process '/sbin/debian-installer' (pid 2545) exited. Scheduling it for restart. Jan 5 22:59:38 init: Starting pid 2607, console /dev/vc/1: '/sbin/debian-installer' Jan 5 23:00:06 init: Starting pid 2108, console /dev/vc/2: '/bin/sh' Jan 5 23:00:39 log-output: ^[[9;0] Jan 5 23:00:39 log-output: ^[%G Jan 5 23:00:39 log-output: (process:2682): INFO: kbd-mode: setting console mode to Unicode (UTF-8) Jan 5 23:00:39 log-output: Jan 5 23:00:40 log-output: (*) DirectFB/Config: Parsing config file '/etc/directfbrc'. Jan 5 23:00:40 log-output: Jan 5 23:00:40 log-output: ---------------------- DirectFB v0.9.25 --------------------- Jan 5 23:00:40 log-output: (c) 2000-2002 convergence integrated media GmbH Jan 5 23:00:40 log-output: (c) 2002-2004 convergence GmbH Jan 5 23:00:40 log-output: ----------------------------------------------------------- Jan 5 23:00:40 log-output: Jan 5 23:00:40 log-output: (*) DirectFB/Core: Single Application Core. (2006-10-17 10:15) Jan 5 23:00:40 log-output: (*) Direct/Memcpy: Using linux kernel memcpy() Jan 5 23:00:40 log-output: (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 2719)... Jan 5 23:00:40 log-output: (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 2720)... Jan 5 23:00:40 log-output: (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [../../../lib/fusion/reactor.c:853] Jan 5 23:00:40 log-output: (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH) Jan 5 23:00:40 log-output: (*) Direct/Thread: Running 'Linux Input' (INPUT, 2721)... Jan 5 23:00:40 log-output: (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence integrated media GmbH) Jan 5 23:00:40 log-output: (*) Direct/Thread: Running 'Linux Input' (INPUT, 2722)... Jan 5 23:00:40 log-output: (*) DirectFB/Input: ImPS/2 Logitech Wheel Mouse (2) 0.1 (convergence integrated media GmbH) Jan 5 23:00:40 log-output: (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (convergence integrated media GmbH) Jan 5 23:00:40 log-output: (!) DirectFB/FBDev: No supported modes found in /etc/fb.modes and current mode not supported! Jan 5 23:00:40 log-output: (!) DirectFB/FBDev: Current mode's pixelformat: rgba 6/0, 6/0, 6/0, 0/0 (4bit) Jan 5 23:00:40 log-output: (!) DirectFB/Core/layers: Failed to initialize layer 0! Jan 5 23:00:40 log-output: --> Initialization error! Jan 5 23:00:40 log-output: (!) DirectFB/Core: Could not initialize 'layers' core! Jan 5 23:00:40 log-output: --> Initialization error! Jan 5 23:00:40 log-output: (#) DirectFBError [gdk_display_open: DirectFBCreate]: Initialization error! Jan 5 23:00:40 log-output: Jan 5 23:00:40 log-output: (debconf:2715): Gtk-WARNING **: cannot open display: ---------------------------------syslog end----------------------------------------- Further information : The kernel symbols (/proc/kallsyms) showed no signs of any i810fb and no modules of that name could be seen (in /lib/modules/.../). There is no fb.modes in /etc/ I think the kernel module for i810fb was not included with the CD image. The text mode install seems to go well. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]