Package: installation-reports Debian-installer-version: RC2 and RC3 netinst i386 uname -a: kernel 2.6 Date: 20050329 Method: Boot from the netinst CD
Machine: Dell PowerEdge 750 Processor: P4 2.8 GHz w/HT Memory: 512 MB DDR-SDRAM ECC Root Device: SCSI (AACRAID) Root Size/partition table: Not relevant. Output of lspci and lspci -n: Not available, not relevant. Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [ ] Config network: [ ] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [E] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Booting with the 2.6 kernel on both RC2 and RC3, the installer fails to detect the CD-ROM drive, which is attached on the onboard PATA controller (Intel chipset). The IDE controller isn't detected at all. On the 3rd console, the installer complains about missing ide modules (ide-detect being one of them). Indeed, trying to load the modules by hand fails, and they're absent from /lib/modules/$kvers/kernel/drivers/ide. It works flawlessly when using the 2.4 kernel. This is a regression from pre-RC2 versions, where the install worked with the 2.6 kernel on the exact same machine. It looks like the 2.6 kernel image (+ modules) is severely broken. (moreover, one of the IDE drivers available produces an OOPS while probing for its hardware, but I can't tell which it is. I'll post details about that tomorrow) More details tomorrow if needed. JB. -- Julien BLACHE <[EMAIL PROTECTED]> | Debian, because code matters more Debian & GNU/Linux Developer | <http://www.debian.org> Public key available on <http://www.jblache.org> - KeyID: F5D6 5169 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]