Package: nut Version: 2.0.5-3 Severity: normal
Hi, The output message of the upsc command is different according to drivers mge-shut and newhidups (like battery.runtime, outlet.1.delay.shutdown, outlet.1.delay.start...). For mge-shut: # upsc [EMAIL PROTECTED] battery.charge: 100 battery.charge.low: 20 battery.runtime: 1400 driver.name: mge-shut driver.parameter.port: /dev/ttyS0 driver.version: 2.0.5 driver.version.internal: 0.66 input.frequency: 50 input.voltage: 234 outlet.0.desc: Main Outlet outlet.0.id: 0 outlet.0.switchable: 0 outlet.1.autoswitch.charge.low: 0 outlet.1.delay.shutdown: -1 outlet.1.delay.start: -1 outlet.1.desc: PowerShare Outlet 1 outlet.1.id: 1 outlet.1.switch: 1 outlet.1.switchable: 1 outlet.2.autoswitch.charge.low: 0 outlet.2.delay.shutdown: -1 outlet.2.delay.start: -1 outlet.2.desc: PowerShare Outlet 2 outlet.2.id: 2 outlet.2.switch: 1 outlet.2.switchable: 1 output.frequency: 50 output.voltage: 233 output.voltage.nominal: 24 ups.delay.shutdown: -1 ups.delay.start: -1 ups.load: 22 ups.mfr: MGE UPS SYSTEMS ups.model: Evolution 850 ups.power.nominal: 850 ups.serial: AV2G3300L ups.status: OL CHRG ups.test.result: Done and passed For newhidups: # upsc [EMAIL PROTECTED] battery.charge: 100 battery.charge.low: 20 battery.charge.restart: 0 battery.runtime: 1550 battery.type: PbAc battery.voltage: 27.0 driver.name: newhidups driver.parameter.port: auto driver.version: 2.0.5 driver.version.data: MGE HID 1.0 driver.version.internal: 0.30 input.frequency: 49.0 input.transfer.boost.low: 184.0 input.transfer.high: 294.0 input.transfer.low: 160.0 input.transfer.trim.high: 265.0 input.voltage: 233.0 outlet.0.desc: Main Outlet outlet.0.id: 0 outlet.0.switchable: no outlet.1.autoswitch.charge.low: 0 outlet.1.delay.shutdown: 65535 outlet.1.delay.start: 3 outlet.1.desc: PowerShare Outlet 1 outlet.1.id: 1 outlet.1.status: on outlet.1.switchable: yes outlet.2.autoswitch.charge.low: 0 outlet.2.delay.shutdown: 65535 outlet.2.delay.start: 6 outlet.2.desc: PowerShare Outlet 2 outlet.2.id: 2 outlet.2.status: on outlet.2.switchable: yes output.current: 0.70 output.frequency: 49.0 output.voltage: 233.0 output.voltage.nominal: 24.0 ups.beeper.status: enabled ups.delay.shutdown: -1 ups.delay.start: -1 ups.load: 23 ups.mfr: MGE UPS SYSTEMS ups.model: Evolution 850 ups.power.nominal: 850 ups.serial: AV2G3300L ups.status: OL CHRG ups.test.interval: 604800 ups.test.result: Done and passed Regards. -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages nut depends on: ii adduser 3.99 Add and remove users and groups ii debconf [debconf-2.0] 1.5.11 Debian configuration management sy ii libc6 2.3.6.ds1-7 GNU C Library: Shared libraries ii lsb-base 3.1-15 Linux Standard Base 3.1 init scrip nut recommends no packages. -- debconf information: nut/change_system_user: nut/major_conf_changes: nut/major_upstream_changes: nut/remove_debian_conf: nut/2_0_upstream_changes: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
