It can be something as simple as a two page text document. The most recent example was a one page "proof of insurance" pdf file. I don't remember how big it was.
Just for completeness, min12xxw status gives: $ min12xxw -m 1350W -status -d /dev/usb/lp1 -t auto min12xxw: unknown tray: atus printer status: OMFG:KONICA MINOLTA;CMD:NA;MDL:PP1350W;CLS:PRINTER;DES:KONICA MINOLTA PP1350W; controller firmware version: 3716 engine firmware version: 413650G10200 page counter: 812 pages I don't remember if we have changed the cartridge on this one or not (we have two - my wife uses the other one at her office), however, we have only purchased KonicaMinolta toner cartridges. On Tuesday 20 March 2007 05:17, Stefan Potyra wrote: > Hi, > > On Tuesday 20 March 2007 06:29:31 Rick Cook wrote: > > When printing to a PagePro 1350W from my Power Macintosh 1Ghz G4 Dual, > > the printer starts up then waits for a very long time making noise. When > > it goes back to idle, quiet mode, the first page of the output starts > > printing. The same cycle repeats for each page of the output. Sometimes > > there are only partial pages printed during this process. > > how big are the files you are trying to print (as in do they have many > graphics in it)? > > FWIW the 1350W has got 8Mb of RAM, so it could be the case that the pages > simply don't fit into the printer's RAM. > > Also, I've been experiencing partial pages myself, however only at the time > my toner was extremely low (the printers error light constantly blinking), > which was fixed after I added a fresh toner. (I've got a 1300W). > > Also, the 1300W (and thus I assume the 1350W as well, but I may be wrong) > has some encoding on the toner cartridge, causing it to slow down speed in > case no original cartridge is being used. Are you using a 3rd party toner > or one from KonicaMinolta? > > Cheers, > Stefan. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]