Michael Biebl a écrit :
> If the nm-applet does not show up, it often means that the hal daemon is
> not running.
> Could you please check next time you resume from suspend, that the dbus
> and hal daemon are running correctly (what does nm-tool say after resume)
So :
- the applet is still in my toolbar but it does not show any interface anymore.
- nm-tool show me :
[EMAIL PROTECTED]:~$ nm-tool
NetworkManager Tool
State: disconnected
print_devices(): didn't get a reply from NetworkManager.
There are no available network devices.
[EMAIL PROTECTED]:~$
- ifup/ifconfig/... (ie low level tools) still works correctly
- dbus and hal deamon seems to be still here :
[EMAIL PROTECTED]:~$ ps axf | egrep '(dbus|hal)'
4341 ? Ss 0:02 /usr/bin/dbus-daemon --system
4349 ? Ss 0:39 /usr/sbin/hald
4350 ? S 0:00 \_ hald-runner
4356 ? S 0:00 \_ hald-addon-acpi: listening on acpid socket
/var/run/acpid.socket
4374 ? S 0:00 \_ hald-addon-keyboard: listening on
/dev/input/event0
4391 ? S 0:12 \_ hald-addon-storage: polling /dev/scd0
5598 ? Ss 0:06 \_ /usr/bin/ssh-agent /usr/bin/dbus-launch
--exit-with-session /usr/bin/seahorse-agent --execute /usr/bin/gnome-session
5601 ? S 0:00 /usr/bin/dbus-launch --exit-with-session
/usr/bin/seahorse-agent --execute /usr/bin/gnome-session
5602 ? Ss 0:00 /usr/bin/dbus-daemon --fork --print-pid 4
--print-address 6 --session
3510 pts/6 S+ 0:00 \_ grep -E (dbus|hal)
[EMAIL PROTECTED]:~$
What do you want else ? What can I try for you ?
Best regards,
Vincent
PS:
As usual, executing /etc/init.d/dbus restart makes all ok:
[EMAIL PROTECTED]:~$ sudo /etc/init.d/dbus restart
Stopping network events dispatcher: NetworkManagerDispatcher.
Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Stopping network connection manager: NetworkManager.
Stopping DHCP D-Bus daemon: dhcdbd.
Stopping Hardware abstraction layer: hald.
Stopping system message bus: dbus.
Starting system message bus: dbus.
Starting Hardware abstraction layer: hald.
Starting DHCP D-Bus daemon: dhcdbd.
Starting network connection manager: NetworkManager.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting network events dispatcher: NetworkManagerDispatcher.
[EMAIL PROTECTED]:~$ nm-tool
NetworkManager Tool
State: connected
- Device: eth5 ----------------------------------------------------------------
NM Path: /org/freedesktop/NetworkManager/Devices/eth5
Type: Wired
Driver: tg3
Active: no
HW Address: 00:14:22:C1:0F:5A
Capabilities:
Supported: yes
Carrier Detect: yes
Speed: 100 Mb/s
Wired Settings
Hardware Link: no
- Device: eth6 ----------------------------------------------------------------
NM Path: /org/freedesktop/NetworkManager/Devices/eth6
Type: 802.11 Wireless
Driver: ipw2200
Active: yes
HW Address: 00:13:CE:C5:F6:6F
Capabilities:
Supported: yes
Speed: 54 Mb/s
Wireless Settings
Scanning: yes
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Networks (* = Current Network)
*U1-IMA-UJF: Infrastructure Mode, Freq 0.000 MHz, Rate 62 Mb/s,
Strength 52%
DRAKKAR1: Infrastructure Mode, Freq 0.000 MHz, Rate 62 Mb/s,
Strength 39%
IMAG-ENS: Infrastructure Mode, Freq 0.000 MHz, Rate 62 Mb/s,
Strength 31%
PLAYBOT_WIFI: Infrastructure Mode, Freq 0.000 MHz, Rate 62 Mb/s,
Strength 29%, Encrypted (WEP)
IMAG-VPN: Infrastructure Mode, Freq 0.000 MHz, Rate 62 Mb/s,
Strength 25%
IP Settings:
IP Address: 10.1.18.162
Subnet Mask: 255.255.255.0
Broadcast: 10.1.18.255
Gateway: 10.1.18.254
Primary DNS: 152.77.2.5
Secondary DNS: 193.54.238.51
[EMAIL PROTECTED]:~$ ps axf | egrep '(dbus|hal)'
5598 ? Ss 0:06 \_ /usr/bin/ssh-agent /usr/bin/dbus-launch
--exit-with-session /usr/bin/seahorse-agent --execute /usr/bin/gnome-session
5601 ? S 0:00 /usr/bin/dbus-launch --exit-with-session
/usr/bin/seahorse-agent --execute /usr/bin/gnome-session
5602 ? Ss 0:00 /usr/bin/dbus-daemon --fork --print-pid 4
--print-address 6 --session
4436 pts/6 S+ 0:00 \_ grep -E (dbus|hal)
3709 ? Ss 0:00 /usr/bin/dbus-daemon --system
3717 ? Ss 0:01 /usr/sbin/hald
3718 ? S 0:00 \_ hald-runner
3725 ? S 0:00 \_ hald-addon-acpi: listening on acpid socket
/var/run/acpid.socket
3735 ? S 0:00 \_ hald-addon-keyboard: listening on
/dev/input/event0
3752 ? S 0:00 \_ hald-addon-storage: polling /dev/scd0
4118 ? S 0:00 \_ /sbin/dhclient -1 -lf
/var/lib/dhcp3/dhclient.eth6.leases -pf /var/run/dhclient.eth6.pid -q -e
dhc_dbus=31 -d eth6
[EMAIL PROTECTED]:~$
> I doubt it's a bug in network-manager, but rather in your driver or
> hal-backend. What do you use as hal-backend, powersave, hibernate,
> acpi-support?
>
> Cheers,
> Michael
>
>
