Package: smartmontools
Version: 5.33-1
Followup-For: Bug #283747
Hi Guido,
-----cut----
lspci:
0000:01:03.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)
lspci -n:
0000:01:03.0 0104: 13c1:1001 (rev 01)
tw_cli-2.00.00.042+ info c2 diag:
3ware DiskSwitch 2/4/8/12
FE7X 1.05.00.068 19-May-04
Model No. : 7810
Bios BE7X 1.08.00.048
(c) 1997 - 2003 3ware
Achip version # 03.20
Achip version # 03.20
Achip version #
Checking Pchip Version
(Will Hang if Incorrect)...
Pchip version # 01.30-33
Alloc rnd :
bkgrnd tasks stopped
waiting for disks ready...
Spinup check:
Aport 03
6C6C
6C6C
disks ready.
TFR Out 00 01 00 00 00 E0 EC
Aport error 03 000015F1 A620
TFR In 6C 6C 6C 6C 6C 6C 6C
---------Error---------
Status: 036C
Code: EC6C
Time: 000015F1 msec
ReqID: 0100
TFR Out 00 01 00 00 00 E0 EC
Aport error 03 000015F1 A620
TFR In 6C 6C 6C 6C 6C 6C 6C
---------Error---------
Status: 03C5
Code: 002F
Time: 000015F2 msec
READY
-----cut----
Well I own a 3ware 7810-8 and querying /dev/sdb totally seemed to stop
working for me, while /dev/twe0 works.
-----cut----
arctic:~# smartctl -a -d 3ware,0 /dev/sdb
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 1
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Apr 2 03:01:38 2005 CEST
SMART is only available in ATA Version 3 Revision 3 or greater.
We will try to proceed in spite of this.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if
SMART supported.
A mandatory SMART command failed: exiting. To continue, add one or more '-T
permissive' options.
arctic:~# smartctl -a -d 3ware,0 /dev/twe0
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: WDC WD2000JB-00EVA0
Serial Number: WD-WMAEH2104337
Firmware Version: 15.05R15
User Capacity: 200,049,647,616 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Apr 2 03:01:23 2005 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting
command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (6933) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 88) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0007 124 116 021 Pre-fail Always
- 4325
4 Start_Stop_Count 0x0032 100 100 040 Old_age Always
- 26
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always
- 8014
10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0013 100 253 051 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 26
194 Temperature_Celsius 0x0022 119 253 000 Old_age Always
- 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always
- 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always
- 161
200 Multi_Zone_Error_Rate 0x0009 200 155 051 Pre-fail Offline
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00% 467 -
# 2 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-----cut----
Just wanted to add this info to the Bug Report just incase somebody
else stumbles over this Problem or you might also consider adding this
as a side-node to the Documentation.
If you need additional Infos/debugging Access you know how to reach me ;)
Ralf
-- Package-specific info:
Ouput of /usr/share/bug/smartmontools:
# CONFIG_IDE_TASK_IOCTL is not set
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-1-686-smp
Locale: LANG=C, [EMAIL PROTECTED] (charmap=UTF-8)
Versions of packages smartmontools depends on:
ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an
-- no debconf information
